Thermophysical Properties Research Literature Retrieval Guide Edited by Y. S. Touloukian, J. K. Gerritsen and N. Y. Moore Second edition, revised and expanded. Book 1: Pp. xxi + 819. Book 2: Pp.621. Book 3: Pp. ix + 1315. (New York: Plenum Press, 1967.) n.p.

/pdf/heat-and-mass-transfer-1yaijfx8vp.pdf

Heat and Mass Transfer

For many years, laser-driven ion acceleration, mainly proton acceleration, has been proposed and a number of proof-of-principle experiments have been carried out with lasers whose pulse duration was in the nanosecond range. In the 1990s, ion acceleration in a relativistic plasma was demonstrated with ultra-short pulse lasers based on the chirped pulse amplification technique which can provide not only picosecond or femtosecond laser pulse duration, but simultaneously ultra-high peak power of terawatt to petawatt levels. Starting from the year 2000, several groups demonstrated low transverse emittance, tens of MeV proton beams with a conversion efficiency of up to several percent. The laser-accelerated particle beams have a duration of the order of a few picoseconds at the source, an ultra-high peak current and a broad energy spectrum, which make them suitable for many, including several unique, applications. This paper reviews, firstly, the historical background including the early laser-matter interaction studies on energetic ion acceleration relevant to inertial confinement fusion. Secondly, we describe several implemented and proposed mechanisms of proton and/or ion acceleration driven by ultra-short high-intensity lasers. We pay special attention to relatively simple models of several acceleration regimes. The models connect the laser, plasma and proton/ion beam parameters, predicting important features, such as energy spectral shape, optimum conditions and scalings under these conditions for maximum ion energy, conversion efficiency, etc. The models also suggest possible ways to manipulate the proton/ion beams by tailoring the target and irradiation conditions. Thirdly, we review experimental results on proton/ion acceleration, starting with the description of driving lasers. We list experimental results and show general trends of parameter dependences and compare them with the theoretical predictions and simulations. The fourth topic includes a review of scientific, industrial and medical applications of laser-driven proton or ion sources, some of which have already been established, while the others are yet to be demonstrated. In most applications, the laser-driven ion sources are complementary to the conventional accelerators, exhibiting significantly different properties. Finally, we summarize the paper.

https://iopscience.iop.org/article/10.1088/0034-4885/75/5/056401/pdf

Review of laser-driven ion sources and their applications.

Science and technologies based on terahertz frequency electromagnetic radiation (100 GHz–30 THz) have developed rapidly over the last 30 years. For most of the 20th Century, terahertz radiation, then referred to as sub-millimeter wave or far-infrared radiation, was mainly utilized by astronomers and some spectroscopists. Following the development of laser based terahertz time-domain spectroscopy in the 1980s and 1990s the field of THz science and technology expanded rapidly, to the extent that it now touches many areas from fundamental science to 'real world' applications. For example THz radiation is being used to optimize materials for new solar cells, and may also be a key technology for the next generation of airport security scanners. While the field was emerging it was possible to keep track of all new developments, however now the field has grown so much that it is increasingly difficult to follow the diverse range of new discoveries and applications that are appearing. At this point in time, when the field of THz science and technology is moving from an emerging to a more established and interdisciplinary field, it is apt to present a roadmap to help identify the breadth and future directions of the field. The aim of this roadmap is to present a snapshot of the present state of THz science and technology in 2017, and provide an opinion on the challenges and opportunities that the future holds. To be able to achieve this aim, we have invited a group of international experts to write 18 sections that cover most of the key areas of THz science and technology. We hope that The 2017 Roadmap on THz science and technology will prove to be a useful resource by providing a wide ranging introduction to the capabilities of THz radiation for those outside or just entering the field as well as providing perspective and breadth for those who are well established. We also feel that this review should serve as a useful guide for government and funding agencies.

The 2016 terahertz science and technology roadmap

The electron cyclotron maser (ECM) is based on a stimulated cyclotron emission process involving energetic electrons in gyrational motion. It constitutes a cornerstone of relativistic electronics, a discipline that has emerged from our understanding and utilization of relativistic effects for the generation of coherent radiation from free electrons. Over a span of four decades, the ECM has undergone a remarkably successful evolution from basic research to device implementation while continuously being enriched by new physical insights. By delivering unprecedented power levels, ECM-based devices have occupied a unique position in the millimeter and submillimeter regions of the electromagnetic spectrum, and find use in numerous applications such as fusion plasma heating, advanced radars, industrial processing, materials characterization, particle acceleration, and tracking of space objects. This article presents a comprehensive review of the fundamental principles of the ECM and their embodiment in practical devices.

/pdf/the-electron-cyclotron-maser-2tiz6d37qb.pdf

The electron cyclotron maser

This article reviews the state-of-the-art in high-power microwave source research. It begins with a discussion of the concepts involved in coherent microwave generation. The main varieties of microwave tubes are classified into three groups, according to the fundamental radiation mechanism involved: Cherenkov, transition, or bremsstrahlung radiation. This is followed by a brief discussion of some of the technical fundamentals of high-power microwave sources, including power supplies and electron guns. Finally, the history and recent developments of both high-peak power and high-average power sources are reviewed in the context of four main areas of application: (1) plasma resonance heating and current drive; (2) rf acceleration of charged particles; (3) radar and communications systems; and (4) high-peak power sources for weapons-effect simulation and exploratory development.

/pdf/review-of-high-power-microwave-source-research-4wfh5blzfg.pdf

Review of high-power microwave source research

A new microwave system in the form of a cylindrical waveguide with a helical corrugation of the inner surface is proposed for a gyrotron traveling wave tube (gyro-TWT). The corrugation radically changes the wave dispersion in the region of small axial wave numbers. This allows significant reduction in the sensitivity of the amplifier to the electron velocity spread and an increase in its frequency bandwidth. An X-band gyro-TWT operating at the second cyclotron harmonic with a 200-keV, 25-A electron beam produced an output power of 1 MW, corresponding to a gain of 23 dB and an efficiency of 20%.

Gyrotron traveling wave amplifier with a helical interaction waveguide

First bandwidth measurements of a novel gyrotron amplifier are presented The coupling between the second harmonic cyclotron mode of a gyrating electron beam and the radiation field occurred in the region of near infinite phase velocity over a broad bandwidth by using a cylindrical waveguide with a helical corrugation on its internal surface With a beam energy of 185 keV, the amplifier achieved a maximum output power of 11 MW, saturated gain of 37 dB, linear gain of 47 dB, saturated bandwidth of 84 to 104 GHz ( $21%$ relative bandwidth), and an efficiency of $29%$, in good agreement with theory

High-gain wide-band gyrotron traveling wave amplifier with a helically corrugated waveguide

A helical corrugation of the inner surface of an oversized cylindrical waveguide provides, for certain parameters, an almost constant value of group velocity and close to zero longitudinal wavenumber of an eigenwave for a very broad frequency band. The use of such a helical waveguide as an operating section of a gyrotron traveling wave tube (gyro-TWT) allows significant widening of its bandwidth and an increase in the efficiency at very large particle velocity spreads. In this paper, the new concept is confirmed by theoretical analysis and "cold" measurements of the helical waveguide dispersion. Results of a linear and nonlinear theory of the helical gyro-TWT as well as two designs for subrelativistic (80 keV, 20 A) and relativistic (300 keV, 80 A) electron beams are also presented. For both designs, parameters providing a very broad frequency band (about 20%) and high efficiency (above 30%) have been found. When the transverse velocity spread is increased from zero up to a very high value of 40%, simulations showed only a 20%-30% narrowing in the frequency band and a 20% decrease in electron efficiency. The theoretical analysis demonstrates important advantages of the helical gyro-TWT over the "smooth" one in frequency bandwidth, sensitivity to electron velocity spread, and stability to parasitic self-excitation.

Gyro-TWT with a helical operating waveguide: new possibilities to enhance efficiency and frequency bandwidth

The results of experimental investigation of two Ka-band gyrotron traveling-wave tube (gyro-TWT) amplifiers with helically corrugated waveguides are presented. The first tube produces pulsed output power of 130-160 kW within the frequency range of 33.1-35.5 GHz and is capable of operating with a 10% duty factor. Reliability of its major components in the high average power operation regime (about 10 kW) was proven in a continuous-wave (CW) experiment. The second gyro-TWT amplifier delivered CW power of up to 7.7 kW with -3-dB bandwidth of 2.6 GHz and -1-dB bandwidth of 2.1 GHz. Effective implementation of single-stage depressed collectors (to the best of our knowledge, for the first time for gyro-TWTs) enabled the electron efficiencies as high as 36% for the pulsed tube and 33% for the CW tube to be achieved at operation at the second cyclotron harmonic.

Ka-Band Gyrotron Traveling-Wave Tubes With the Highest Continuous-Wave and Average Power

A helically corrugated waveguide was used for a gyrotron backward-wave oscillator (gyro-BWO) experiment. A thermionic cathode was used to produce an electron beam of 90-215 keV in energy, 2-3 A in current, and pitch alpha of up to 1.6. The oscillator achieved high-efficiency frequency-tunable operation. At a fixed beam voltage of 185 kV and a current of 2 A, the output frequency was tuned by adjusting the magnetic field in the interaction cavity. A maximum power of 62 kW and a 3-dB frequency-tuning band of 8.0-9.5 GHz (17% relative tuning range) with a maximum electronic efficiency of 16.5% were measured. In addition, the interaction frequency could be tuned by varying the electron beam energy. At a fixed cavity magnetic field of 0.195 T, the output frequency and power from the gyro-BWO were measured as a function of tuning electron beam energy while the beam current was maintained at 2.5 A. A 3-dB relative frequency tuning range of 8% was measured when the electron beam voltage was changed from 215 to 110 kV.

Sergey V. Samsonov

Papers

Gyrotron traveling wave amplifier with a helical interaction waveguide

High-gain wide-band gyrotron traveling wave amplifier with a helically corrugated waveguide

Gyro-TWT with a helical operating waveguide: new possibilities to enhance efficiency and frequency bandwidth

Ka-Band Gyrotron Traveling-Wave Tubes With the Highest Continuous-Wave and Average Power

Gyro-BWO experiments using a helical interaction waveguide