Rayleigh, Brillouin and Raman scatterings in fibers result from the interaction of photons with local material characteristic features like density, temperature and strain. For example an acoustic/mechanical wave generates a dynamic density variation; such a variation may be affected by local temperature, strain, vibration and birefringence. By detecting changes in the amplitude, frequency and phase of light scattered along a fiber, one can realize a distributed fiber sensor for measuring localized temperature, strain, vibration and birefringence over lengths ranging from meters to one hundred kilometers. Such a measurement can be made in the time domain or frequency domain to resolve location information. With coherent detection of the scattered light one can observe changes in birefringence and beat length for fibers and devices. The progress on state of the art technology for sensing performance, in terms of spatial resolution and limitations on sensing length is reviewed. These distributed sensors can be used for disaster prevention in the civil structural monitoring of pipelines, bridges, dams and railroads. A sensor with centimeter spatial resolution and high precision measurement of temperature, strain, vibration and birefringence can find applications in aerospace smart structures, material processing, and the characterization of optical materials and devices.

Recent progress in distributed fiber optic sensors.

Optical Waveguide Theory

Random distributed feedback fibre lasers

A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.

Supercontinuum generation, photonic crystal fiber

Over the past few decades, optical fibers have been widely deployed to implement various applications in high-speed long-distance telecommunication, optical imaging, ultrafast lasers, and optical sensors. Distributed optical fiber sensors characterized by spatially resolved measurements along a single continuous strand of optical fiber have undergone significant improvements in underlying technologies and application scenarios, representing the highest state of the art in optical sensing. This work is focused on a review of three types of distributed optical fiber sensors which are based on Rayleigh, Brillouin, and Raman scattering, and use various demodulation schemes, including optical time-domain reflectometry, optical frequency-domain reflectometry, and related schemes. Recent developments of various distributed optical fiber sensors to provide simultaneous measurements of multiple parameters are analyzed based on their sensing performance, revealing an inherent trade-off between performance parameters such as sensing range, spatial resolution, and sensing resolution. This review highlights the latest progress in distributed optical fiber sensors with an emphasis on energy applications such as energy infrastructure monitoring, power generation system monitoring, oil and gas pipeline monitoring, and geothermal process monitoring. This review aims to clarify challenges and limitations of distributed optical fiber sensors with the goal of providing a pathway to push the limits in distributed optical fiber sensing for practical applications.

Distributed optical fiber sensing: Review and perspective

We demonstrate a novel type of distributed optical fiber acoustic sensor, with the ability to detect and retrieve actual temporal waveforms of multiple vibration events that occur simultaneously at different positions along the fiber. The system is realized via a dual-pulse phase-sensitive optical time-domain reflectometry, and the actual waveform is retrieved by heterodyne phase demodulation. Experimental results show that the system has a background noise level as low as 8.91×10−4  rad/√Hz with a demodulation signal-to-noise ratio of 49.17 dB at 1 kHz, and can achieve a dynamic range of ∼60  dB at 1 kHz (0.1 to 104 rad) for phase demodulation, as well as a detection frequency range from 20 Hz to 25 kHz.

Multi-event waveform-retrieved distributed optical fiber acoustic sensor using dual-pulse heterodyne phase-sensitive OTDR.

We report a single frequency lasing phenomenon with a narrow linewidth of ∼3  kHz in cascaded fiber that is composed of three types of low-loss communication fibers. The Rayleigh scattering of the Brillouin Stokes light created in the middle fiber section along both directions is enhanced by the other two fiber sections. When the Brillouin gain of the middle fiber exceeds the effective loss of the Brillouin stokes light in a roundtrip, a narrow linewidth lasing is observed on the top of the Brillouin spectrum line of the middle fiber. To the best of our knowledge, it is the first report on Rayleigh scattering-assisted Brillouin lasing with single frequency and narrow linewidth in cascaded low-loss communication fibers.

Rayleigh scattering-assisted narrow linewidth Brillouin lasing in cascaded fiber.

The positioning mean square error (MSE) prediction theory for dual Mach-Zehnder interferometric vibration sensor is proposed. The cross-correlation algorithm is considered. By taking into account the general noise time delay model, the impact of each noise term in output interference signal to ultimate positioning MSE is to our knowledge the first time be analyzed. An equivalent signal to noise ratio term for general noise time delay model is derived. It shows that incoherent phase noise (coming from polarization fading effect) makes an equivalent contribution to positioning MSE as additive noise under assumptions. In practical prediction, cross-correlation coefficient between two channel signals can be used to estimate positioning MSE. Simulation as well as experimental results are presented to corroborate the theory.

Positioning Error Prediction Theory for Dual Mach–Zehnder Interferometric Vibration Sensor

A double-nanospike As2S3–silica hybrid waveguide structure is reported. The structure comprises nanotapers at input and output ends of a step-index waveguide with a subwavelength core (1 μm in diameter), with the aim of increasing the in-coupling and out-coupling efficiency. The design of the input nanospike is numerically optimized to match both the diameter and divergence of the input beam, resulting in efficient excitation of the fundamental mode of the waveguide. The output nanospike is introduced to reduce the output beam divergence and the strong endface Fresnel reflection. The insertion loss of the waveguide is measured to be ∼2  dB at 1550 nm in the case of free-space in-coupling, which is ∼7  dB lower than the previously reported single-nanospike waveguide. By pumping a 3-mm-long waveguide at 1550 nm using a 60-fs fiber laser, an octave-spanning supercontinuum (from 0.8 to beyond 2.5 μm) is generated at 38 pJ input energy.

As_2S_3–silica double-nanospike waveguide for mid-infrared supercontinuum generation

A topic of great current interest is the harnessing and enhancement of optical tweezer forces for trapping small objects of different sizes and shapes at relatively small powers. Here we demonstrate the stable trapping, inside the core of a hollow-core photonic crystal fiber (HC-PCF), of a mechanically compliant fused silica nanospike, formed by tapering a single-mode fiber (SMF). The nanospike is subwavelength in diameter over its ∼50  μm insertion length in the HC-PCF. Laser light, launched into the SMF core, adiabatically evolves into a mode that extends strongly into the space surrounding the nanospike. It then senses the presence of the hollow core, and the resulting optomechanical action and back-action results in a strong trapping force at the core center. The system permits lens-less, reflection-free, self-stabilized, and self-aligned coupling from SMF to HC-PCF with a demonstrated efficiency of 87.8%. The unique configuration also provides an elegant means of investigating optomechanical effects in optical tweezers, especially at very low pressures.

Shangran Xie

Papers

Multi-event waveform-retrieved distributed optical fiber acoustic sensor using dual-pulse heterodyne phase-sensitive OTDR.

Rayleigh scattering-assisted narrow linewidth Brillouin lasing in cascaded fiber.

Positioning Error Prediction Theory for Dual Mach–Zehnder Interferometric Vibration Sensor

As_2S_3–silica double-nanospike waveguide for mid-infrared supercontinuum generation

Self-alignment of glass fiber nanospike by optomechanical back-action in hollow-core photonic crystal fiber