International Technology Roadmap for Semiconductors 2003の要求清浄度について － シリコンウエハ表面と雰囲気環境に要求される清浄度, 分析方法の現状について －

An RF-DC power conversion system is designed to efficiently convert far-field RF energy to DC voltages at very low received power and voltages. Passive rectifier circuits are designed in a 0.25 mum CMOS technology using floating gate transistors as rectifying diodes. The 36-stage rectifier can rectify input voltages as low as 50 mV with a voltage gain of 6.4 and operates with received power as low as 5.5 muW(22.6 dBm). Optimized for far field, the circuit operates at a distance of 44 m from a 4 W EIRP source. The high voltage range achieved at low load current make it ideal for use in passively powered sensor networks.

Efficient Far-Field Radio Frequency Energy Harvesting for Passively Powered Sensor Networks

The idea of wireless power transfer (WPT) has been around since the inception of electricity. In the late 19th century, Nikola Tesla described the freedom to transfer energy between two points without the need for a physical connection to a power source as an ?all-surpassing importance to man? [1]. A truly wireless device, capable of being remotely powered, not only allows the obvious freedom of movement but also enables devices to be more compact by removing the necessity of a large battery. Applications could leverage this reduction in size and weight to increase the feasibility of concepts such as paper-thin, flexible displays [2], contact-lens-based augmented reality [3], and smart dust [4], among traditional point-to-point power transfer applications. While several methods of wireless power have been introduced since Tesla?s work, including near-field magnetic resonance and inductive coupling, laser-based optical power transmission, and far-field RF/microwave energy transmission, only RF/microwave and laser-based systems are truly long-range methods. While optical power transmission certainly has merit, its mechanisms are outside of the scope of this article and will not be discussed.

Harvesting Wireless Power: Survey of Energy-Harvester Conversion Efficiency in Far-Field, Wireless Power Transfer Systems

More than a decade of research in the field of thermal, motion, vibration and electromagnetic radiation energy harvesting has yielded increasing power output and smaller embodiments. Power management circuits for rectification and DC–DC conversion are becoming able to efficiently convert the power from these energy harvesters. This paper summarizes recent energy harvesting results and their power management circuits.

/pdf/micropower-energy-harvesting-1l9ase94z1.pdf

Micropower energy harvesting

More than a decade of research in the field of thermal, motion, vibration and electromagnetic radiation energy harvesting has yielded increasing power output and smaller embodiments. Power management circuits for rectification and DC-DC conversion are becoming able to efficiently convert the power from these energy harvesters. This paper summarizes recent energy harvesting results and their power management circuits.

PROBLEM TO BE SOLVED: To provide an electronic apparatus system which can reduce power consumption without the need for manual operation. SOLUTION: The electronic apparatus system comprises a reaming amount detection part which detects a remaining amount of a secondary battery, a transmission part which transmits a signal corresponding to the detection result of the remaining amount detection part, an AC-DC conversion part which converts an AC voltage to a DC voltage and feeds it to the secondary battery, a receiving part which receives a signal transmitted by the transmission part, and a control part which controls AC-DC conversion by the AC-DC conversion part when the receiving part receives the signal. COPYRIGHT: (C)2010,JPO&INPIT

Electronic apparatus system

A starting apparatus includes: a storage unit storing an identifier; a rectifying unit rectifying a reception signal; a generating unit comparing the reception signal rectified in the rectifying unit to a reference signal and generating a digital signal from the reception signal; a judging unit judging whether or not the digital signal contains information of the identifier; a reference changing unit changing the reference signal when the judging unit judges that the reception signal does not contain information of the identifier; and a start instructing unit instructing start of an electric appliance when the judging unit judges that the reception signal contains information of the identifier.

Starting apparatus and starting method

A 380-MHz CMOS Linear-in-dB Variable Gain Amplifier with Gain Compensation Techniques for CDMA Systems

http://ieeexplore.ieee.org/iel3/4915/13567/00623821.pdf

Shoji Otaka

Papers

Electronic apparatus system

Starting apparatus and starting method

A 380-MHz CMOS Linear-in-dB Variable Gain Amplifier with Gain Compensation Techniques for CDMA Systems

A very low offset 1.9-GHz Si mixer for direct conversion receivers

Filter adjusting apparatus, power adjusting system, and filter adjusting method