http://pierrepinson.com/31761/Literature/foley2012.pdf

Current methods and advances in forecasting of wind power generation

https://www.lef.wiwi.uni-due.de/fileadmin/fileupload/BWL-LEF/Seminarreihe/RWeron14_Essen.pdf

Electricity price forecasting: A review of the state-of-the-art with a look into the future

A variety of methods and ideas have been tried for electricity price forecasting (EPF) over the last 15 years, with varying degrees of success. This review article aims at explaining the complexity of available solutions, their strengths and weaknesses, and the opportunities and treats that the forecasting tools offer or that may be encountered. The paper also looks ahead and speculates on the directions EPF will or should take in the next decade or so. In particular, it postulates the need for objective comparative EPF studies involving (i) the same datasets, (ii) the same robust error evaluation procedures and (iii) statistical testing of the significance of the outperformance of one model by another.

Preface. Acknowledgments. 1 Complex Electricity Markets. 1.1 Liberalization. 1.2 The Marketplace. 1.2.1 Power Pools and Power Exchanges. 1.2.2 Nodal and Zonal Pricing. 1.2.3 Market Structure. 1.2.4 Traded Products. 1.3 Europe. 1.3.1 The England and Wales Electricity Market. 1.3.2 The Nordic Market. 1.3.3 Price Setting at Nord Pool. 1.3.4 Continental Europe 13. 1.4 North America. 1.4.1 PJM Interconnection. 1.4.2 California and the Electricity Crisis. 1.4.3 Alberta and Ontario. 1.5 Australia and New Zealand. 1.6 Summary. 1.7 Further Reading. 2 Stylized Facts of Electricity Loads and Prices. 2.1 Introduction. 2.2 Price Spikes. 2.2.1 Case Study: The June 1998 Cinergy Price Spike. 2.2.2 When Supply Meets Demand. 2.2.3 What is Causing the Spikes?. 2.2.4 The Definition. 2.3 Seasonality. 2.3.1 Measuring Serial Correlation. 2.3.2 Spectral Analysis and the Periodogram. 2.3.3 Case Study: Seasonal Behavior of Electricity Prices and Loads. 2.4 Seasonal Decomposition. 2.4.1 Differencing. 2.4.2 Mean or Median Week. 2.4.3 Moving Average Technique. 2.4.4 Annual Seasonality and Spectral Decomposition. 2.4.5 Rolling Volatility Technique. 2.4.6 Case Study: Rolling Volatility in Practice. 2.4.7 Wavelet Decomposition. 2.4.8 Case Study: Wavelet Filtering of Nord Pool Hourly System Prices. 2.5 Mean Reversion. 2.5.1 R/S Analysis. 2.5.2 Detrended Fluctuation Analysis. 2.5.3 Periodogram Regression. 2.5.4 Average Wavelet Coefficient. 2.5.5 Case Study: Anti-persistence of Electricity Prices. 2.6 Distributions of Electricity Prices. 2.6.1 Stable Distributions. 2.6.2 Hyperbolic Distributions. 2.6.3 Case Study: Distribution of EEX Spot Prices. 2.6.4 Further Empirical Evidence and Possible Applications. 2.7 Summary. 2.8 Further Reading. 3 Modeling and Forecasting Electricity Loads. 3.1 Introduction. 3.2 Factors Affecting Load Patterns. 3.2.1 Case Study: Dealing with Missing Values and Outliers. 3.2.2 Time Factors. 3.2.3 Weather Conditions. 3.2.4 Case Study: California Weather vs Load. 3.2.5 Other Factors. 3.3 Overview of Artificial Intelligence-Based Methods. 3.4 Statistical Methods. 3.4.1 Similar-Day Method. 3.4.2 Exponential Smoothing. 3.4.3 Regression Methods. 3.4.4 Autoregressive Model. 3.4.5 Autoregressive Moving Average Model. 3.4.6 ARMA Model Identification. 3.4.7 Case Study: Modeling Daily Loads in California. 3.4.8 Autoregressive Integrated Moving Average Model. 3.4.9 Time Series Models with Exogenous Variables. 3.4.10 Case Study: Modeling Daily Loads in California with Exogenous Variables. 3.5 Summary. 3.6 Further Reading. 4 Modeling and Forecasting Electricity Prices. 4.1 Introduction. 4.2 Overview of Modeling Approaches. 4.3 Statistical Methods and Price Forecasting. 4.3.1 Exogenous Factors. 4.3.2 Spike Preprocessing. 4.3.3 How to Assess the Quality of Price Forecasts. 4.3.4 ARMA-type Models. 4.3.5 Time Series Models with Exogenous Variables. 4.3.6 Autoregressive GARCH Models. 4.3.7 Case Study: Forecasting Hourly CalPX Spot Prices with Linear Models. 4.3.8 Case Study: Is Spike Preprocessing Advantageous?. 4.3.9 Regime-Switching Models. 4.3.10 Calibration of Regime-Switching Models. 4.3.11 Case Study: Forecasting Hourly CalPX Spot Prices with Regime-Switching Models. 4.3.12 Interval Forecasts. 4.4 Quantitative Models and Derivatives Valuation. 4.4.1 Jump-Diffusion Models. 4.4.2 Calibration of Jump-Diffusion Models. 4.4.3 Case Study: A Mean-Reverting Jump-Diffusion Model for Nord Pool Spot Prices. 4.4.4 Hybrid Models. 4.4.5 Case Study: Regime-Switching Models for Nord Pool Spot Prices. 4.4.6 Hedging and the Use of Derivatives. 4.4.7 Derivatives Pricing and the Market Price of Risk. 4.4.8 Case Study: Asian-Style Electricity Options. 4.5 Summary. 4.6 Further Reading. Bibliography. Index.

Modeling and Forecasting Electricity Loads and Prices: A Statistical Approach

Probabilistic electric load forecasting: A tutorial review

Probabilistic energy forecasting: Global Energy Forecasting Competition 2014 and beyond

Short-term load forecasting is an essential instrument in power system planning, operation, and control. Many operating decisions are based on load forecasts, such as dispatch scheduling of generating capacity, reliability analysis, and maintenance planning for the generators. Overestimation of electricity demand will cause a conservative operation, which leads to the start-up of too many units or excessive energy purchase, thereby supplying an unnecessary level of reserve. On the other hand, underestimation may result in a risky operation, with insufficient preparation of spinning reserve, causing the system to operate in a vulnerable region to the disturbance. In this paper, semi-parametric additive models are proposed to estimate the relationships between demand and the driver variables. Specifically, the inputs for these models are calendar variables, lagged actual demand observations, and historical and forecast temperature traces for one or more sites in the target power system. In addition to point forecasts, prediction intervals are also estimated using a modified bootstrap method suitable for the complex seasonality seen in electricity demand data. The proposed methodology has been used to forecast the half-hourly electricity demand for up to seven days ahead for power systems in the Australian National Electricity Market. The performance of the methodology is validated via out-of-sample experiments with real data from the power system, as well as through on-site implementation by the system operator.

/pdf/short-term-load-forecasting-based-on-a-semi-parametric-4pkbxprv30.pdf

Short-Term Load Forecasting Based on a Semi-Parametric Additive Model

This paper aims to develop a load forecasting method for short-term load forecasting, based on an adaptive two-stage hybrid network with self-organized map (SOM) and support vector machine (SVM). In the first stage, a SOM network is applied to cluster the input data set into several subsets in an unsupervised manner. Then, groups of 24 SVMs for the next day's load profile are used to fit the training data of each subset in the second stage in a supervised way. The proposed structure is robust with different data types and can deal well with the nonstationarity of load series. In particular, our method has the ability to adapt to different models automatically for the regular days and anomalous days at the same time. With the trained network, we can straightforwardly predict the next-day hourly electricity load. To confirm the effectiveness, the proposed model has been trained and tested on the data of the historical energy load from New York Independent System Operator.

Short-term load forecasting based on an adaptive hybrid method

http://pierrepinson.com/31761/Literature/hong2014.pdf

Global Energy Forecasting Competition 2012

Long-term electricity demand forecasting plays an important role in planning for future generation facilities and transmission augmentation. In a long-term context, planners must adopt a probabilistic view of potential peak demand levels. Therefore density forecasts (providing estimates of the full probability distributions of the possible future values of the demand) are more helpful than point forecasts, and are necessary for utilities to evaluate and hedge the financial risk accrued by demand variability and forecasting uncertainty. This paper proposes a new methodology to forecast the density of long-term peak electricity demand. Peak electricity demand in a given season is subject to a range of uncertainties, including underlying population growth, changing technology, economic conditions, prevailing weather conditions (and the timing of those conditions), as well as the general randomness inherent in individual usage. It is also subject to some known calendar effects due to the time of day, day of week, time of year, and public holidays. A comprehensive forecasting solution is described in this paper. First, semi-parametric additive models are used to estimate the relationships between demand and the driver variables, including temperatures, calendar effects and some demographic and economic variables. Then the demand distributions are forecasted by using a mixture of temperature simulation, assumed future economic scenarios, and residual bootstrapping. The temperature simulation is implemented through a new seasonal bootstrapping method with variable blocks. The proposed methodology has been used to forecast the probability distribution of annual and weekly peak electricity demand for South Australia since 2007. The performance of the methodology is evaluated by comparing the forecast results with the actual demand of the summer 2007-2008.

/pdf/density-forecasting-for-long-term-peak-electricity-demand-2cq53c94no.pdf

Shu Fan

Papers

Probabilistic energy forecasting: Global Energy Forecasting Competition 2014 and beyond

Short-Term Load Forecasting Based on a Semi-Parametric Additive Model

Short-term load forecasting based on an adaptive hybrid method

Global Energy Forecasting Competition 2012

Density Forecasting for Long-Term Peak Electricity Demand