Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid–solution range. The solid–solution range, which is...

The Li-ion rechargeable battery: a perspective.

The lithium metal battery is strongly considered to be one of the most promising candidates for high-energy-density energy storage devices in our modern and technology-based society. However, uncontrollable lithium dendrite growth induces poor cycling efficiency and severe safety concerns, dragging lithium metal batteries out of practical applications. This review presents a comprehensive overview of the lithium metal anode and its dendritic lithium growth. First, the working principles and technical challenges of a lithium metal anode are underscored. Specific attention is paid to the mechanistic understandings and quantitative models for solid electrolyte interphase (SEI) formation, lithium dendrite nucleation, and growth. On the basis of previous theoretical understanding and analysis, recently proposed strategies to suppress dendrite growth of lithium metal anode and some other metal anodes are reviewed. A section dedicated to the potential of full-cell lithium metal batteries for practical applicatio...

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review.

Rechargeable lithium-sulfur batteries.

Electrolytes and interphases in Li-ion batteries and beyond.

Solid-state electrolytes are attracting increasing interest for electrochemical energy storage technologies. In this Review, we provide a background overview and discuss the state of the art, ion-transport mechanisms and fundamental properties of solid-state electrolyte materials of interest for energy storage applications. We focus on recent advances in various classes of battery chemistries and systems that are enabled by solid electrolytes, including all-solid-state lithium-ion batteries and emerging solid-electrolyte lithium batteries that feature cathodes with liquid or gaseous active materials (for example, lithium–air, lithium–sulfur and lithium–bromine systems). A low-cost, safe, aqueous electrochemical energy storage concept with a ‘mediator-ion’ solid electrolyte is also discussed. Advanced battery systems based on solid electrolytes would revitalize the rechargeable battery field because of their safety, excellent stability, long cycle lives and low cost. However, great effort will be needed to implement solid-electrolyte batteries as viable energy storage systems. In this context, we discuss the main issues that must be addressed, such as achieving acceptable ionic conductivity, electrochemical stability and mechanical properties of the solid electrolytes, as well as a compatible electrolyte/electrode interface. This Review details recent advances in battery chemistries and systems enabled by solid electrolytes, including all-solid-state lithium-ion, lithium–air, lithium–sulfur and lithium–bromine batteries, as well as an aqueous battery concept with a mediator-ion solid electrolyte.

Lithium battery chemistries enabled by solid-state electrolytes

Electrical energy storage is one of the most critical needs of 21st century society. Applications that depend on electrical energy storage include portable electronics, electric vehicles, and devices for renewable energy storage from solar and wind. Lithium-ion (Li-ion) batteries have the highest energy density among the rechargeable battery chemistries. As a result, Li-ion batteries have proven successful in the portable electronics market and will play a significant role in large-scale energy storage. Over the past two decades, Li-ion batteries based on insertion cathodes have reached a cathode capacity of ∼250 mA h g(-1) and an energy density of ∼800 W h kg(-1), which do not meet the requirement of ∼500 km between charges for all-electric vehicles. With a goal of increasing energy density, researchers are pursuing alternative cathode materials such as sulfur and O2 that can offer capacities that exceed those of conventional insertion cathodes, such as LiCoO2 and LiMn2O4, by an order of magnitude (>1500 mA h g(-1)). Sulfur, one of the most abundant elements on earth, is an electrochemically active material that can accept up to two electrons per atom at ∼2.1 V vs Li/Li(+). As a result, sulfur cathode materials have a high theoretical capacity of 1675 mA h g(-1), and lithium-sulfur (Li-S) batteries have a theoretical energy density of ∼2600 W h kg(-1). Unlike conventional insertion cathode materials, sulfur undergoes a series of compositional and structural changes during cycling, which involve soluble polysulfides and insoluble sulfides. As a result, researchers have struggled with the maintenance of a stable electrode structure, full utilization of the active material, and sufficient cycle life with good system efficiency. Although researchers have made significant progress on rechargeable Li-S batteries in the last decade, these cycle life and efficiency problems prevent their use in commercial cells. To overcome these persistent problems, researchers will need new sulfur composite cathodes with favorable properties and performance and new Li-S cell configurations. In this Account, we first focus on the development of novel composite cathode materials including sulfur-carbon and sulfur-polymer composites, describing the design principles, structure and properties, and electrochemical performances of these new materials. We then cover new cell configurations with carbon interlayers and Li/dissolved polysulfide cells, emphasizing the potential of these approaches to advance capacity retention and system efficiency. Finally, we provide a brief survey of efficient electrolytes. The Account summarizes improvements that could bring Li-S technology closer to mass commercialization.

Challenges and prospects of lithium-sulfur batteries.

The limitations in the cathode capacity compared with that of the anode have been an impediment to advance the lithium-ion battery technology. The lithium–sulphur system is appealing in this regard, as sulphur exhibits an order of magnitude higher capacity than the currently used cathodes. However, low active material utilization and poor cycle life hinder the practicality of lithium–sulphur batteries. Here we report a simple adjustment to the traditional lithium–sulphur battery configuration to achieve high capacity with a long cycle life and rapid charge rate. With a bifunctional microporous carbon paper between the cathode and separator, we observe a significant improvement not only in the active material utilization but also in capacity retention, without involving complex synthesis or surface modification. The insertion of a microporous carbon interlayer decreases the internal charge transfer resistance and localizes the soluble polysulphide species, facilitating a commercially feasible means of fabricating the lithium–sulphur batteries. The practical performance of lithium sulphide batteries is much less than their predicted performance because redox products dissolve over time. Su and Manthiram show that microporous carbon membranes inserted between cathode and separator localize soluble polysulphide species and improve battery cycling characteristics.

/pdf/lithium-sulphur-batteries-with-a-microporous-carbon-paper-as-k3iuhcbr4r.pdf

Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer

https://www.rsc.org/suppdata/cc/c2/c2cc33945e/c2cc33945e.pdf

A new approach to improve cycle performance of rechargeable lithium–sulfur batteries by inserting a free-standing MWCNT interlayer

The success of rechargeable lithium-ion batteries has brought indisputable convenience to human society for the past two decades. However, unlike commercialized intercalation cathodes, high-energy-density sulphur cathodes are still in the stage of research because of the unsatisfactory capacity retention and long-term cyclability. The capacity degradation over extended cycles originates from the soluble polysulphides gradually diffusing out of the cathode region. Here we report an applicable way to recharge lithium-sulphur cells by a simple charge operation control that offers tremendous improvement with various lithium-sulphur battery systems. Adjusting the charging condition leads to long cycle life (over 500 cycles) with excellent capacity retention (>99%) by inhibiting electrochemical reactions along with severe polysulphide dissolution. This charging strategy and understanding of the reactions in different discharge steps will advance progress in the development of lithium-sulphur batteries.

/pdf/a-strategic-approach-to-recharging-lithium-sulphur-batteries-gxhtt5yfk6.pdf

Su Yu-Sheng

Papers

Rechargeable lithium-sulfur batteries.

Challenges and prospects of lithium-sulfur batteries.

Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer

A new approach to improve cycle performance of rechargeable lithium–sulfur batteries by inserting a free-standing MWCNT interlayer

A strategic approach to recharging lithium-sulphur batteries for long cycle life