Syed H. Masood

TL;DR: In this article, the development of an explicit finite element model of a cold spray process with defined initial and boundary environment is considered, which is then used to determine the optimum operating parameters to deposit titanium particles.

TL;DR: In this paper, the effect of four SLM process parameters namely laser power, defocus distance, layer thickness and build orientation were considered on the porosity of 17-4PH stainless steel parts built on ProX200 SLM direct metal printer.

TL;DR: In this article, the authors examined the mechanical behavior of poly(lactic acid)-based packaging, which was subjected to an external load while undergoing dimensional and material property changes due to the diffusion of liquid through its thickness.

TL;DR: In this article, the Schoen Gyroid type 3D lattice structure with different unit cell sizes and volume fractions and evaluating their manufacturability on the FDM 3D printing machine is presented.

TL;DR: In this article, a 3D multicomponent model for cold spray was developed to assist with the understanding of the complicated events that underlie particle deposition and bond formation, and a holistic approach was implemented to determine the gas properties from the stagnation zone, through the nozzle to the substrate surface, as well as the trajectories, velocity and temperature distribution of powder particles accelerated by this flow.