A review was presented to demonstrate a historical description of the synthesis of light-emitting conjugated polymers for applications in electroluminescent devices. Electroluminescence (EL) was first reported in poly(para-phenylene vinylene) (PPV) in 1990 and researchers continued to make significant efforts to develop conjugated materials as the active units in light-emitting devices (LED) to be used in display applications. Conjugated oligomers were used as luminescent materials and as models for conjugated polymers in the review. Oligomers were used to demonstrate a structure and property relationship to determine a key polymer property or to demonstrate a technique that was to be applied to polymers. The review focused on demonstrating the way polymer structures were made and the way their properties were controlled by intelligent and rational and synthetic design.

Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices

Electrochemical energy storage systems (batteries) have a tremendous role in technical applications In this review the authors examine the prospects of electroactive polymers in view of the properties required for such batteries Conducting organic polymers are considered here in the light of their rugged chemical environment: organic solvents, acids, and alkalis The goal of the present article is to provide, first of all in tabular form, a survey of electroactive polymers in view of potential applications in rechargeable batteries It reviews the preparative methods and the electrochemical performance of polymers as rechargeable battery electrodes The theoretical values of specific charge of the polymers are comparable to those of metal oxide electrodes, but are not as high as those of most of the metal electrodes normally used in batteries Therefore, it is an advantage in conventional battery designs to use the conducting polymer as a positive electrode material in combination with a negative electrode such as Li, Na, Mg, Zn, MeH{sub x}, etc 504 refs

Electrochemically Active Polymers for Rechargeable Batteries.

Recent research results pertaining to InN, GaN and AlN are reviewed, focusing on the different growth techniques of Group III-nitride crystals and epitaxial films, heterostructures and devices. The chemical and thermal stability of epitaxial nitride films is discussed in relation to the problems of deposition processes and the advantages for applications in high-power and high-temperature devices. The development of growth methods like metalorganic chemical vapour deposition and plasma-induced molecular beam epitaxy has resulted in remarkable improvements in the structural, optical and electrical properties. New developments in precursor chemistry, plasma-based nitrogen sources, substrates, the growth of nucleation layers and selective growth are covered. Deposition conditions and methods used to grow alloys for optical bandgap and lattice engineering are introduced. The review is concluded with a description of recent Group III-nitride semiconductor devices such as bright blue and white light-emitting diodes, the first blue-emitting laser, high-power transistors, and a discussion of further applications in surface acoustic wave devices and sensors.

https://iopscience.iop.org/article/10.1088/0022-3727/31/20/001/pdf

Growth and applications of Group III-nitrides

Electrochemical capacitors, so-called supercapacitors, play an important role in energy storage and conversion systems. In the last decade, with the increasing volume of scientific activity and publications in this field, researchers have developed better tools to improve electrode materials. Although carbonaceous materials seem the most suitable for supercapacitor applications, a large diversity of materials has been proposed and studied. Yet, in order to accomplish performance beyond the limitations of each material, mainly in terms of energy density and durability, composite materials have been implemented, most of them being the combinations of carbon-based materials and other components. In this review, we present the recent advances in the field of composite materials that include at least one carbon-based component for supercapacitor electrodes. We focus on cases in which a single material by itself suffers from a drawback that can be overcome by combining it with other components, enabling the fabrication of a composite material with enhanced performance. We present several important compositions as well as the major routes of synthesis, characterization and performance of composite materials in this field.

Carbon-based composite materials for supercapacitor electrodes: a review

All-polymer and paper-based energy storage devices have significant inherent advantages in comparison with many currently employed batteries and supercapacitors regarding environmental friendliness, flexibility, cost and versatility. The research within this field is currently undergoing an exciting development as new polymers, composites and paper-based devices are being developed. In this report, we review recent progress concerning the development of flexible energy storage devices based on electronically conducting polymers and cellulose containing composites with particular emphasis on paper-based batteries and supercapacitors. We discuss recent progress in the development of the most commonly used electronically conducting polymers used in flexible device prototypes, the advantages and disadvantages of this type of energy storage devices, as well as the two main approaches used in the manufacturing of paper-based charge storage devices.

Toward Flexible Polymer and Paper‐Based Energy Storage Devices

Degree of charge transfer in organic conductors by infrared absorption spectroscopy

This perspective discusses theories of polymer thermoelectrics, identifying combinations of electronic charge carrier energies and thermal conductivity mechanisms that could lead to the highest efficiencies. Structures, electrical conductivities, Seebeck coefficients, and figures of merit are summarized for some recently devised polymer-based thermoelectric materials. Foundational equations that define these quantities are presented, and are related to thermal conductivities as well. Finally, approaches to polymer composite design that optimize thermoelectric performance in light of the theoretical models are proposed.

Prospects for polymer-based thermoelectrics: state of the art and theoretical analysis

The authors have fabricated an all-polymer battery utilizing the redox properties of electrically conducting polymers for the anode and cathode in conjunction with an ionic conducting polymer gel electrolyte. The anode and cathode consist of pyrrole electropolymerized onto a graphite fiber substrate resulting in a high-surface-area, composite electrode. A polymer gel electrolyte, based on polyacrylonitrile, was solution cast onto the electrodes to form an all-polymer cell. This system exhibits a specific charge capacity of 22 mAh/g based on the electroactive mass of the cathode and discharging the system to 0.4 V. These cells show no loss of capacity when cycled to 100 cycles.

Polypyrrole Composite Electrodes in an All‐Polymer Battery System

Low-Temperature Metallic Behavior and Resistance Minimum in a New Quasi One-Dimensional Organic Conductor

Strong interest in energy generation and storage has yielded excellent progress on organic based solar cells, and there is also a strong desire for equivalent advancement in polymer-based charge storage devices such as batteries and super-capacitors. Despite extensive research on electronically conducting polymers including polypyrrole, polythiophene, and polyaniline, limitations to the maximum doping density and chemical stability had been considered a significant restriction on the development of polymer batteries. Recent work appears to show a meaningful increase in the upper bound of the maximum density from 0.5 to 1.0 electrons per monomer depending on the structure, processing, and ionic species used in charging and discharging of the polymers. Several recent examples have also implied that more stable, reversible charge-discharge cycling is being observed in n-doped polymers. These observations suggest that the performance metrics of this class of electronically conducting polymer may ultimately reach the levels required for practical battery applications. Further efforts are essential to perfect practical large-scale electrode fabrication to move toward greater compatibility in the methods used for solar cells and those used in producing batteries. A better understanding must also be developed to elucidate the effects of molecular structure and polymer architecture on these materials.

https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0884291400007664

Theodore O. Poehler

Papers

Degree of charge transfer in organic conductors by infrared absorption spectroscopy

Prospects for polymer-based thermoelectrics: state of the art and theoretical analysis

Polypyrrole Composite Electrodes in an All‐Polymer Battery System

Low-Temperature Metallic Behavior and Resistance Minimum in a New Quasi One-Dimensional Organic Conductor

Batteries and charge storage devices based on electronically conducting polymers