Additive manufacturing of metallic components – Process, structure and properties

Freedom of design, mass customisation, waste minimisation and the ability to manufacture complex structures, as well as fast prototyping, are the main benefits of additive manufacturing (AM) or 3D printing. A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out. In particular, the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed. The current state of materials development, including metal alloys, polymer composites, ceramics and concrete, was presented. In addition, this paper discussed the main processing challenges with void formation, anisotropic behaviour, the limitation of computer design and layer-by-layer appearance. Overall, this paper gives an overview of 3D printing, including a survey on its benefits and drawbacks as a benchmark for future research and development.

Additive manufacturing (3D printing): A review of materials, methods, applications and challenges

Additive manufacturing (AM) technology has been researched and developed for more than 20 years. Rather than removing materials, AM processes make three-dimensional parts directly from CAD models by adding materials layer by layer, offering the beneficial ability to build parts with geometric and material complexities that could not be produced by subtractive manufacturing processes. Through intensive research over the past two decades, significant progress has been made in the development and commercialization of new and innovative AM processes, as well as numerous practical applications in aerospace, automotive, biomedical, energy and other fields. This paper reviews the main processes, materials and applications of the current AM technology and presents future research needs for this technology.

Additive manufacturing: technology, applications and research needs

Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing

3D printing, more formally known as Additive Manufacturing (AM), is already being adopted for rapid prototyping and soon rapid manufacturing. This review provides a brief discussion about AM and also the most employed AM technologies for polymers. The commonly-used ASTM and ISO mechanical test standards which have been used by various research groups to test the strength of the 3D-printed parts have been reported. Also, a summary of an exhaustive amount of literature regarding the mechanical properties of 3D-printed parts is included, specifically, properties under different loading types such as tensile, bending, compressive, fatigue, impact and others. Properties at low temperatures have also been discussed. Further, the effects of fillers as well as post-processing on the mechanical properties have also been discussed. Lastly, several important questions to consider in the standardization of mechanical test methods have been raised.

Mechanical characterization of 3D-printed polymers

Additive manufacturing (AM) has been used in aerospace applications from the beginning. It not only plays a role as a rapid prototyping technology for saving capital and time during the product development period but also brings profound influences on product design, direct part fabrication, assembly, and repair in the aerospace industry. Because of recent developments, AM has rapidly become a strategic technology that will generate revenues throughout the aerospace supply chain. In this chapter, we analyze the characteristics of aerospace components favoring AM, discuss different aerospace applications benefit from different AM processes, and describe the repair applications for aerospace components. Examples of aerospace applications both from commercial and academia areas are also analyzed. Finally, this chapter discusses the challenges of applying AM to the aerospace industry and potential future aerospace applications.

Aerospace applications of laser additive manufacturing

The quality and efficiency of laser-aided direct metal deposition largely depends on the powder stream structure below the nozzle. Numerical modeling of the powder concentration distribution is complex due to the complex phenomena involved in the two-phase turbulence flow. In this paper, the gravity-driven powder flow is studied along with powder properties, nozzle geometries, and shielding gas settings. A 3-D numerical model is introduced to quantitatively predict the powder stream concentration variation in order to facilitate coaxial nozzle design optimizations. Effects of outer shielding gas directions, inner/outer shielding gas flow rate, powder passage directions, and opening width on the structure of the powder stream are systematically studied. An experimental setup is designed to quantitatively measure the particle concentration directly for this process. The numerical simulation results are compared with the experimental data using prototyped coaxial nozzles. The results are found to match and then validate the simulation. This study shows that the particle concentration mode is influenced significantly by nozzle geometries and gas settings.

The Investigation of Gravity-Driven Metal Powder Flow in Coaxial Nozzle for Laser-Aided Direct Metal Deposition Process

Integrated Process Planning for a Multiaxis Hybrid Manufacturing System

Process planning strategies for solid freeform fabrication of metal parts

Purpose – Laser metal deposition (LMD) is a type of additive manufacturing process in which the laser is used to create a melt pool on a substrate to which metal powder is added. The powder is melted within the melt pool and solidified to form a deposited track. These deposited tracks may contain porosities or cracks which affect the functionality of the part. When these defects go undetected, they may cause failure of the part or below par performance in their applications. An on demand vision system is required to detect defects in the track as and when they are formed. This is especially crucial in LMD applications as the part being repaired is typically expensive. Using a defect detection system, it is possible to complete the LMD process in one run, thus minimizing cost. The purpose of this paper is to summarize the research on a low-cost vision system to study the deposition process and detect any thermal abnormalities which might signify the presence of a defect. Design/methodology/approach – Durin...

Todd E. Sparks

Papers

Aerospace applications of laser additive manufacturing

The Investigation of Gravity-Driven Metal Powder Flow in Coaxial Nozzle for Laser-Aided Direct Metal Deposition Process

Integrated Process Planning for a Multiaxis Hybrid Manufacturing System

Process planning strategies for solid freeform fabrication of metal parts

Vision-based defect detection in laser metal deposition process