This paper presents a simple two-branch transmit diversity scheme. Using two transmit antennas and one receive antenna the scheme provides the same diversity order as maximal-ratio receiver combining (MRRC) with one transmit antenna, and two receive antennas. It is also shown that the scheme may easily be generalized to two transmit antennas and M receive antennas to provide a diversity order of 2M. The new scheme does not require any bandwidth expansion or any feedback from the receiver to the transmitter and its computation complexity is similar to MRRC.

A simple transmit diversity technique for wireless communications

Cognitive radio is viewed as a novel approach for improving the utilization of a precious natural resource: the radio electromagnetic spectrum. The cognitive radio, built on a software-defined radio, is defined as an intelligent wireless communication system that is aware of its environment and uses the methodology of understanding-by-building to learn from the environment and adapt to statistical variations in the input stimuli, with two primary objectives in mind: /spl middot/ highly reliable communication whenever and wherever needed; /spl middot/ efficient utilization of the radio spectrum. Following the discussion of interference temperature as a new metric for the quantification and management of interference, the paper addresses three fundamental cognitive tasks. 1) Radio-scene analysis. 2) Channel-state estimation and predictive modeling. 3) Transmit-power control and dynamic spectrum management. This work also discusses the emergent behavior of cognitive radio.

/pdf/cognitive-radio-brain-empowered-wireless-communications-9m6gu0vz1z.pdf

Cognitive radio: brain-empowered wireless communications

Probability Distributions.- Linear Models for Regression.- Linear Models for Classification.- Neural Networks.- Kernel Methods.- Sparse Kernel Machines.- Graphical Models.- Mixture Models and EM.- Approximate Inference.- Sampling Methods.- Continuous Latent Variables.- Sequential Data.- Combining Models.

Pattern Recognition and Machine Learning

Wireless Communications

We introduce space-time block coding, a new paradigm for communication over Rayleigh fading channels using multiple transmit antennas. Data is encoded using a space-time block code and the encoded data is split into n streams which are simultaneously transmitted using n transmit antennas. The received signal at each receive antenna is a linear superposition of the n transmitted signals perturbed by noise. Maximum-likelihood decoding is achieved in a simple way through decoupling of the signals transmitted from different antennas rather than joint detection. This uses the orthogonal structure of the space-time block code and gives a maximum-likelihood decoding algorithm which is based only on linear processing at the receiver. Space-time block codes are designed to achieve the maximum diversity order for a given number of transmit and receive antennas subject to the constraint of having a simple decoding algorithm. The classical mathematical framework of orthogonal designs is applied to construct space-time block codes. It is shown that space-time block codes constructed in this way only exist for few sporadic values of n. Subsequently, a generalization of orthogonal designs is shown to provide space-time block codes for both real and complex constellations for any number of transmit antennas. These codes achieve the maximum possible transmission rate for any number of transmit antennas using any arbitrary real constellation such as PAM. For an arbitrary complex constellation such as PSK and QAM, space-time block codes are designed that achieve 1/2 of the maximum possible transmission rate for any number of transmit antennas. For the specific cases of two, three, and four transmit antennas, space-time block codes are designed that achieve, respectively, all, 3/4, and 3/4 of maximum possible transmission rate using arbitrary complex constellations. The best tradeoff between the decoding delay and the number of transmit antennas is also computed and it is shown that many of the codes presented here are optimal in this sense as well.

/pdf/space-time-block-codes-from-orthogonal-designs-1oj68nrilr.pdf

Space-time block codes from orthogonal designs

We consider the design of channel codes for improving the data rate and/or the reliability of communications over fading channels using multiple transmit antennas. Data is encoded by a channel code and the encoded data is split into n streams that are simultaneously transmitted using n transmit antennas. The received signal at each receive antenna is a linear superposition of the n transmitted signals perturbed by noise. We derive performance criteria for designing such codes under the assumption that the fading is slow and frequency nonselective. Performance is shown to be determined by matrices constructed from pairs of distinct code sequences. The minimum rank among these matrices quantifies the diversity gain, while the minimum determinant of these matrices quantifies the coding gain. The results are then extended to fast fading channels. The design criteria are used to design trellis codes for high data rate wireless communication. The encoding/decoding complexity of these codes is comparable to trellis codes employed in practice over Gaussian channels. The codes constructed here provide the best tradeoff between data rate, diversity advantage, and trellis complexity. Simulation results are provided for 4 and 8 PSK signal sets with data rates of 2 and 3 bits/symbol, demonstrating excellent performance that is within 2-3 dB of the outage capacity for these channels using only 64 state encoders.

/pdf/space-time-codes-for-high-data-rate-wireless-communication-1cgp5sbe62.pdf

Space-time codes for high data rate wireless communication: performance criterion and code construction

We document the performance of space-time block codes, which provide a new paradigm for transmission over Rayleigh fading channels using multiple transmit antennas. Data is encoded using a space-time block code, and the encoded data is split into n streams which are simultaneously transmitted using n transmit antennas. The received signal at each receive antenna is a linear superposition of the n transmitted signals perturbed by noise. Maximum likelihood decoding is achieved in a simple way through decoupling of the signals transmitted from different antennas rather than joint detection. This uses the orthogonal structure of the space-time block code and gives a maximum likelihood decoding algorithm which is based only on linear processing at the receiver. We review the encoding and decoding algorithms for various codes and provide simulation results demonstrating their performance. It is shown that using multiple transmit antennas and space-time block coding provides remarkable performance at the expense of almost no extra processing.

/pdf/space-time-block-coding-for-wireless-communications-27ulldau60.pdf

Space-time block coding for wireless communications: performance results

Cognitive radio promises a low-cost, highly flexible alternative to the classic single-frequency band, single-protocol wireless device. By sensing and adapting to its environment, such a device is able to fill voids in the wireless spectrum and can dramatically increase spectral efficiency. In this paper, the cognitive radio channel is defined as a two-sender, two-receiver interference channel in which sender 2 obtains the encoded message sender 1 plans to transmit. We consider two cases: in the genie-aided cognitive radio channel, sender 2 is noncausally presented the data to be transmitted by sender 1 while in the causal cognitive radio channel, the data is obtained causally. The cognitive radio at sender 2 may then choose to transmit simultaneously over the same channel, as opposed to waiting for an idle channel as is traditional for a cognitive radio. Our main result is the development of an achievable region which combines Gel'fand-Pinkser coding with an achievable region construction for the interference channel. In the additive Gaussian noise case, this resembles dirty-paper coding, a technique used in the computation of the capacity of the Gaussian multiple-input multiple-output (MIMO) broadcast channel. Numerical evaluation of the region in the Gaussian noise case is performed, and compared to an inner bound, the interference channel, and an outer bound, a modified Gaussian MIMO broadcast channel. Results are also extended to the case in which the message is causally obtained.

http://140.113.144.123/Achievable%20rates%20in%20cognitive%20radio%20channels.pdf

Achievable rates in cognitive radio channels

We present a transmission scheme for exploiting diversity given by two transmit antennas when neither the transmitter nor the receiver has access to channel state information. The new detection scheme can use equal energy constellations and encoding is simple. At the receiver, decoding is achieved with low decoding complexity. The transmission provides full spatial diversity and requires no channel state side information at the receiver. The scheme can be considered as the extension of differential detection schemes to two transmit antennas.

/pdf/a-differential-detection-scheme-for-transmit-diversity-38h9rcxiwf.pdf

Vahid Tarokh

Papers

Space-time block codes from orthogonal designs

Space-time codes for high data rate wireless communication: performance criterion and code construction

Space-time block coding for wireless communications: performance results

Achievable rates in cognitive radio channels

A differential detection scheme for transmit diversity