物件導向軟體之架構(Object-Oriented Software Construction)探討

It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity. >

On the capacity of a cellular CDMA system

The objective of this paper is to give a comprehensive introduction to applied cryptography with an engineer or computer scientist in mind. The emphasis is on the knowledge needed to create practical systems which supports integrity, confidentiality, or authenticity. Topics covered includes an introduction to the concepts in cryptography, attacks against cryptographic systems, key use and handling, random bit generation, encryption modes, and message authentication codes. Recommendations on algorithms and further reading is given in the end of the paper. This paper should make the reader able to build, understand and evaluate system descriptions and designs based on the cryptographic components described in the paper.

[서평]「Applied Cryptography」

/pdf/a-break-in-the-clouds-towards-a-cloud-definition-svovsw1r5a.pdf

A Break in the Clouds: Towards a Cloud Definition

From the Book:
“Clean code that works” is Ron Jeffries’ pithy phrase. The goal is clean code that works, and for a whole bunch of reasons:
Clean code that works is a predictable way to develop. You know when you are finished, without having to worry about a long bug trail.Clean code that works gives you a chance to learn all the lessons that the code has to teach you. If you only ever slap together the first thing you think of, you never have time to think of a second, better, thing. Clean code that works improves the lives of users of our software.Clean code that works lets your teammates count on you, and you on them.Writing clean code that works feels good.But how do you get to clean code that works? Many forces drive you away from clean code, and even code that works. Without taking too much counsel of our fears, here’s what we do—drive development with automated tests, a style of development called “Test-Driven Development” (TDD for short). 
In Test-Driven Development, you:
Write new code only if you first have a failing automated test.Eliminate duplication.

Two simple rules, but they generate complex individual and group behavior. Some of the technical implications are:You must design organically, with running code providing feedback between decisionsYou must write your own tests, since you can’t wait twenty times a day for someone else to write a testYour development environment must provide rapid response to small changesYour designs must consist of many highly cohesive, loosely coupled components, just to make testing easy

The two rules imply an order to the tasks ofprogramming:
1. Red—write a little test that doesn’t work, perhaps doesn’t even compile at first
2. Green—make the test work quickly, committing whatever sins necessary in the process
3. Refactor—eliminate all the duplication created in just getting the test to work


Red/green/refactor. The TDD’s mantra.

Assuming for the moment that such a style is possible, it might be possible to dramatically reduce the defect density of code and make the subject of work crystal clear to all involved. If so, writing only code demanded by failing tests also has social implications:
If the defect density can be reduced enough, QA can shift from reactive to pro-active workIf the number of nasty surprises can be reduced enough, project managers can estimate accurately enough to involve real customers in daily developmentIf the topics of technical conversations can be made clear enough, programmers can work in minute-by-minute collaboration instead of daily or weekly collaborationAgain, if the defect density can be reduced enough, we can have shippable software with new functionality every day, leading to new business relationships with customers


So, the concept is simple, but what’s my motivation? Why would a programmer take on the additional work of writing automated tests? Why would a programmer work in tiny little steps when their mind is capable of great soaring swoops of design? Courage.
Courage
Test-driven development is a way of managing fear during programming. I don’t mean fear in a bad way, pow widdle prwogwammew needs a pacifiew, but fear in the legitimate, this-is-a-hard-problem-and-I-can’t-see-the-end-from-the-beginning sense. If pain is nature’s way of saying “Stop!”, fear is nature’s way of saying “Be careful.” Being careful is good, but fear has a host of other effects:
Makes you tentativeMakes you want to communicate lessMakes you shy from feedbackMakes you grumpy

None of these effects are helpful when programming, especially when programming something hard. So, how can you face a difficult situation and:
Instead of being tentative, begin learning concretely as quickly as possible.Instead of clamming up, communicate more clearly.Instead of avoiding feedback, search out helpful, concrete feedback.(You’ll have to work on grumpiness on your own.) 

Imagine programming as turning a crank to pull a bucket of water from a well. When the bucket is small, a free-spinning crank is fine. When the bucket is big and full of water, you’re going to get tired before the bucket is all the way up. You need a ratchet mechanism to enable you to rest between bouts of cranking. The heavier the bucket, the closer the teeth need to be on the ratchet.

The tests in test-driven development are the teeth of the ratchet. Once you get one test working, you know it is working, now and forever. You are one step closer to having everything working than you were when the test was broken. Now get the next one working, and the next, and the next. By analogy, the tougher the programming problem, the less ground should be covered by each test.

Readers of Extreme Programming Explained will notice a difference in tone between XP and TDD. TDD isn’t an absolute like Extreme Programming. XP says, “Here are things you must be able to do to be prepared to evolve further.” TDD is a little fuzzier. TDD is an awareness of the gap between decision and feedback during programming, and techniques to control that gap. “What if I do a paper design for a week, then test-drive the code? Is that TDD?” Sure, it’s TDD. You were aware of the gap between decision and feedback and you controlled the gap deliberately.

That said, most people who learn TDD find their programming practice changed for good. “Test Infected” is the phrase Erich Gamma coined to describe this shift. You might find yourself writing more tests earlier, and working in smaller steps than you ever dreamed would be sensible. On the other hand, some programmers learn TDD and go back to their earlier practices, reserving TDD for special occasions when ordinary programming isn’t making progress.

There are certainly programming tasks that can’t be driven solely by tests (or at least, not yet). Security software and concurrency, for example, are two topics where TDD is not sufficient to mechanically demonstrate that the goals of the software have been met. Security relies on essentially defect-free code, true, but also on human judgement about the methods used to secure the software. Subtle concurrency problems can’t be reliably duplicated by running the code.

Once you are finished reading this book, you should be ready to:
Start simplyWrite automated testsRefactor to add design decisions one at a time

This book is organized into three sections.
An example of writing typical model code using TDD. The example is one I got from Ward Cunningham years ago, and have used many times since, multi-currency arithmetic. In it you will learn to write tests before code and grow a design organically.An example of testing more complicated logic, including reflection and exceptions, by developing a framework for automated testing. This example also serves to introduce you to the xUnit architecture that is at the heart of many programmer-oriented testing tools. In the second example you will learn to work in even smaller steps than in the first example, including the kind of self-referential hooha beloved of computer scientists.Patterns for TDD. Included are patterns for the deciding what tests to write, how to write tests using xUnit, and a greatest hits selection of the design patterns and refactorings used in the examples.

I wrote the examples imagining a pair programming session. If you like looking at the map before wandering around, you may want to go straight to the patterns in Section 3 and use the examples as illustrations. If you prefer just wandering around and then looking at the map to see where you’ve been, try reading the examples through and refering to the patterns when you want more detail about a technique, then using the patterns as a reference.

Several reviewers have commented they got the most out of the examples when they started up a programming environment and entered the code and ran the tests as they read.

A note about the examples. Both examples, multi-currency calculation and a testing framework, appear simple. There are (and I have seen) complicated, ugly, messy ways of solving the same problems. I could have chosen one of those complicated, ugly, messy solutions to give the book an air of “reality.” However, my goal, and I hope your goal, is to write clean code that works. Before teeing off on the examples as being too simple, spend 15 seconds imagining a programming world in which all code was this clear and direct, where there were no complicated solutions, only apparently complicated problems begging for careful thought. TDD is a practice that can help you lead yourself to exactly that careful thought.

Test Driven Development: By Example

In this paper, we analyze impact of period of key exchanges on the lifetime of interconnected IEEE 802.15.4 beacon enabled clusters. Bridges between the clusters are implemented on cluster coordinators in source clusters. Each cluster coordinator will initiate key exchange with the ordinary node or with the bridge after it receives nk data packets from the node (or bridge). We assume that all nodes are applying power management technique based on the constant event sensing reliability required by the coordinator. We evaluate node populations which will equalize cluster lifetimes in this environment.

Lifetime Equalization with Key Exchanges in IEEE 802.15.4 Networks

Eclipse-based Stake-Bleeding (ESB) attack is a kind of long-range attacks in a Proof-of-Stake (PoS) blockchain system, which can shorten the attack completion time. Researchers have quantitatively analyzed ESB attack but ignoring checkpointing defense technique, which solidifies the history of blockchain and then prevents an adversary to change the blockchain. This paper aims to investigate the capability of the checkpoint-based defense scheme in resisting ESB attack. We develop a Monte Carlo simulator to capture the dynamics of a PoS blockchain system, which is subject to ESB attack and deploys checkpoint-base defense scheme. We also develop the methods for calculating the probability of successful attack and attack profit. This simulator can be applied to evaluate the influence of ESB attack and the checkpointing capability from the perspective of honest verifiers, adversaries and victims. Our experiment results can help enhance PoS blockchain security.

Evaluating Checkpointing Capability against Eclipse-based Stake-Bleeding Attack in PoS Blockchain

A high performance two-layer consensus architecture for blockchain-based IoT systems

Cognitive personal area networks build the available channel map by using cooperative sensing of primary channels by piconet members. Number of primary channels is usually larger than the number of piconet members available for channel sensing. This means that at the given time only a subset of primary channels will be sensed and that information about channel state of the other channels will be inaccurate. In this paper we try to establish the dependency of the sensing error on the number of sensors (piconet members) and the number of primary channels. Results show that a number of sensors which is about one-half of the number of channels allows the sensing error to remain below 1%.

Tradeoff Between CPAN Size and the Number of Working Channels

In this work we design and model a policy which incentivizes nodes to vote in a multiple entry PBFT protocol. Each time a node votes on a block proposal, a token is generated for that node. Nodes that do not vote are penalized by denying them the right to submit proposals until they have collected a sufficient number of tokens. We present a queuing M/G/1 model of token control mechanism and integrated queuing model of the node with access regulated with token mechanism. Performance results confirm the efficiency of proposed scheme.

Vojislav B. Misic

Papers

Lifetime Equalization with Key Exchanges in IEEE 802.15.4 Networks

Evaluating Checkpointing Capability against Eclipse-based Stake-Bleeding Attack in PoS Blockchain

A high performance two-layer consensus architecture for blockchain-based IoT systems

Tradeoff Between CPAN Size and the Number of Working Channels

Voting control in multiple entry PBFT blockchain systems for IoT