The iodide/triiodide redox shuttle has limited the efficiencies accessible in dye-sensitized solar cells. Here, we report mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8). The specific molecular design of YD2-o-C8 greatly retards the rate of interfacial back electron transfer from the conduction band of the nanocrystalline titanium dioxide film to the oxidized cobalt mediator, which enables attainment of strikingly high photovoltages approaching 1 volt. Because the YD2-o-C8 porphyrin harvests sunlight across the visible spectrum, large photocurrents are generated. Cosensitization of YD2-o-C8 with another organic dye further enhances the performance of the device, leading to a measured power conversion efficiency of 12.3% under simulated air mass 1.5 global sunlight.

/pdf/porphyrin-sensitized-solar-cells-with-cobalt-ii-iii-based-4hk3cx0ing.pdf

Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency

Simultaneous modification of the dye and redox shuttle boosts the efficiency of a dye-sensitized solar cell. The iodide/triiodide redox shuttle has limited the efficiencies accessible in dye-sensitized solar cells. Here, we report mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8). The specific molecular design of YD2-o-C8 greatly retards the rate of interfacial back electron transfer from the conduction band of the nanocrystalline titanium dioxide film to the oxidized cobalt mediator, which enables attainment of strikingly high photovoltages approaching 1 volt. Because the YD2-o-C8 porphyrin harvests sunlight across the visible spectrum, large photocurrents are generated. Cosensitization of YD2-o-C8 with another organic dye further enhances the performance of the device, leading to a measured power conversion efficiency of 12.3% under simulated air mass 1.5 global sunlight.

Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency (vol 334, pg 629, 2011)

The inherent flexibility afforded by molecular design has accelerated the development of a wide variety of organic semiconductors over the past two decades. In particular, great advances have been made in the development of materials for organic light-emitting diodes (OLEDs), from early devices based on fluorescent molecules to those using phosphorescent molecules. In OLEDs, electrically injected charge carriers recombine to form singlet and triplet excitons in a 1:3 ratio; the use of phosphorescent metal-organic complexes exploits the normally non-radiative triplet excitons and so enhances the overall electroluminescence efficiency. Here we report a class of metal-free organic electroluminescent molecules in which the energy gap between the singlet and triplet excited states is minimized by design, thereby promoting highly efficient spin up-conversion from non-radiative triplet states to radiative singlet states while maintaining high radiative decay rates, of more than 10(6) decays per second. In other words, these molecules harness both singlet and triplet excitons for light emission through fluorescence decay channels, leading to an intrinsic fluorescence efficiency in excess of 90 per cent and a very high external electroluminescence efficiency, of more than 19 per cent, which is comparable to that achieved in high-efficiency phosphorescence-based OLEDs.

/pdf/highly-efficient-organic-light-emitting-diodes-from-delayed-31otvjgv66.pdf

Highly efficient organic light-emitting diodes from delayed fluorescence

A geometrical analysis has been performed on π–π stacking in metal complexes with aromatic nitrogen-containing ligands based on a Cambridge Structural Database search and on X-ray data of examples in the recent literature. It is evident that a face-to-face π–π alignment where most of the ring-plane area overlaps is a rare phenomenon. The usual π interaction is an offset or slipped stacking, i.e. the rings are parallel displaced. The ring normal and the vector between the ring centroids form an angle of about 20° up to centroid–centroid distances of 3.8 A. Such a parallel-displaced structure also has a contribution from π–σ attraction, the more so with increasing offset. Only a limited number of structures with a near to perfect facial alignment exists. The term π–π stacking is occasionally used even when there is no substantial overlap of the π-ring planes. There is a number of metal–ligand complexes where only the edges of the rings interact in what would be better described a C–H⋯π attraction.

A critical account on π–π stacking in metal complexes with aromatic nitrogen-containing ligands

Aggregation-induced emission: phenomenon, mechanism and applications.

A polyfluorene 12 has been prepared in which bulky polyphenylene dendrimer substituents suppress formation of long wavelength emitting aggregates, thus giving a polymer with pure blue emission. Absorption- and emission spectra and molecular modeling confirm that the bulky dendrimer side chains do not cause extra torsion between the fluorene units. New polyfluorenes with 9,9-diaryl substituents have been prepared to determine the minimum size of substituent necessary for aggregation suppression. An LED using 12 has been demonstrated to produce blue emission with onset voltages below 4 V.

Polyfluorenes with Polyphenylene Dendron Side Chains: Toward Non-Aggregating, Light-Emitting Polymers

Single-crystal-to-single-crystal photodimerization of cinnamic acid

Dithieno[2,3‐d;2′,3′‐d′]benzo[1,2‐b;4,5‐b′]dithiophene (DTBDT) as Semiconductor for High‐Performance, Solution‐Processed Organic Field‐Effect Transistors

Annularly fused hexapyrrolohexaazacoronenes: an extended pi system with multiple interior nitrogen atoms displays stable oxidation states.

Starting from the fourfold ethynyl-substituted chromophore 1,3,6,8-tetraethynylpyrene as core, a series of polyphenylene dendrimers was prepared in high yield by combining divergent and convergent growth methods. The fluorescence quantum yields (Q(f)>0.92) of the encapsulated pyrene chromophore were independent of the size of the polyphenylene shell. Fluorescence quenching studies and temperature-dependent fluorescence spectroscopy were performed to investigate the site isolation of the core. They indicate that a second-generation dendrimer layer is needed to efficiently shield the encapsulated pyrene and prevent aggregate formation. Alkali-metal reduction of the encapsulated pyrene core was carried out to afford the corresponding pyrene radical anions, for which hampered electron transfer to the core was observed with increasing dendrimer generation, which is further proof of the site isolation due to the polyphenylene shell. To improve film formation and solubility of the material, solubilizing alkyl chains were introduced on the periphery of the spherical particles. Furthermore, highly transparent films obtained by a simple drop-casting method showed blue emission mainly from the unaggregated species. The materials presented herein combine high quantum efficiency, good solubility, and improved film-forming properties, which make them possible candidates for several applications in electronic devices.

Volker Enkelmann

Papers

Polyfluorenes with Polyphenylene Dendron Side Chains: Toward Non-Aggregating, Light-Emitting Polymers

Single-crystal-to-single-crystal photodimerization of cinnamic acid

Dithieno[2,3‐d;2′,3′‐d′]benzo[1,2‐b;4,5‐b′]dithiophene (DTBDT) as Semiconductor for High‐Performance, Solution‐Processed Organic Field‐Effect Transistors

Annularly fused hexapyrrolohexaazacoronenes: an extended pi system with multiple interior nitrogen atoms displays stable oxidation states.

Pyrene as Chromophore and Electrophore: Encapsulation in a Rigid Polyphenylene Shell