다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

Hydrophilic polymers are the center of research emphasis in nanotechnology because of their perceived “intelligence”. They can be used as thin films, scaffolds, or nanoparticles in a wide range of biomedical and biological applications. Here we highlight recent developments in engineering uncrosslinked and crosslinked hydrophilic polymers for these applications. Natural, biohybrid, and synthetic hydrophilic polymers and hydrogels are analyzed and their thermodynamic responses are discussed. In addition, examples of the use of hydrogels for various therapeutic applications are given. We show how such systems’ intelligent behavior can be used in sensors, microarrays, and imaging. Finally, we outline challenges for the future in integrating hydrogels into biomedical applications.

/pdf/hydrogels-in-biology-and-medicine-from-molecular-principles-3lowrzjjsl.pdf

Hydrogels in Biology and Medicine: From Molecular Principles to Bionanotechnology†

基礎講座 電気泳動(Electrophoresis)

Hydrogels, due to their unique biocompatibility, flexible methods of synthesis, range of constituents, and desirable physical characteristics, have been the material of choice for many applications in regenerative medicine. They can serve as scaffolds that provide structural integrity to tissue constructs, control drug and protein delivery to tissues and cultures, and serve as adhesives or barriers between tissue and material surfaces. In this work, the properties of hydrogels that are important for tissue engineering applications and the inherent material design constraints and challenges are discussed. Recent research involving several different hydrogels polymerized from a variety of synthetic and natural monomers using typical and novel synthetic methods are highlighted. Finally, special attention is given to the microfabrication techniques that are currently resulting in important advances in the field.

/pdf/hydrogels-in-regenerative-medicine-lx1cllc4g8.pdf

Hydrogels in regenerative medicine

Sasidharan Swarnalatha Lucky,†,§ Khee Chee Soo,‡ and Yong Zhang*,†,§,∥ †NUS Graduate School for Integrative Sciences & Engineering (NGS), National University of Singapore, Singapore, Singapore 117456 ‡Division of Medical Sciences, National Cancer Centre Singapore, Singapore, Singapore 169610 Department of Biomedical Engineering, Faculty of Engineering, National University of Singapore, Singapore, Singapore 117576 College of Chemistry and Life Sciences, Zhejiang Normal University, Zhejiang, P. R. China 321004

Nanoparticles in photodynamic therapy.

The fabrication of hydrogel microstructures based upon poly(ethylene glycol) diacrylates, dimethacrylates, and tetraacrylates patterned photolithographically on silicon or glass substrates is described. A silicon/silicon dioxide surface was treated with 3-(trichlorosilyl)propyl methacrylate to form a self-assembled monolayer (SAM) with pendant acrylate groups. The SAM presence on the surface was verified using ellipsometry and time-of-flight secondary ion mass spectrometry. A solution containing an acrylated or methacrylated poly(ethylene glycol) derivative and a photoinitiator (2,2-dimethoxy-2-phenylacetophenone) was spin-coated onto the treated substrate, exposed to 365 nm ultraviolet light through a photomask, and developed with either toluene, water, or supercritical CO2. As a result of this process, three-dimensional, cross-linked PEG hydrogel microstructures were immobilized on the surface. Diameters of cylindrical array members were varied from 600 to 7 micrometers by the use of different photomasks, while height varied from 3 to 12 micrometers, depending on the molecular weight of the PEG macromer. In the case of 7 micrometers diameter elements, as many as 400 elements were reproducibly generated in a 1 mm2 square pattern. The resultant hydrogel patterns were hydrated for as long as 3 weeks without delamination from the substrate. In addition, micropatterning of different molecular weights of PEG was demonstrated. Arrays of hydrogel disks containing an immobilized protein conjugated to a pH sensitive fluorophore were also prepared. The pH sensitivity of the gel-immobilized dye was similar to that in an aqueous buffer, and no leaching of the dye-labeled protein from the hydrogel microstructure was observed over a 1 week period. Changes in fluorescence were also observed for immobilized fluorophore labeled acetylcholine esterase upon the addition of acetyl acholine.

Fabrication of poly(ethylene glycol) hydrogel microstructures using photolithography

Metal enhanced fluorescence (MEF) for biosensors: General approaches and a review of recent developments

We present an easy and effective method for the encapsulation of cells inside PEG-based hydrogel microstructures fabricated using photolithography. High-density arrays of three-dimensional microstructures were created on substrates using this method. Mammalian cells were encapsulated in cylindrical hydrogel microstructures of 600 and 50 micrometers in diameter or in cubic hydrogel structures in microfluidic channels. Reducing lateral dimension of the individual hydrogel microstructure to 50 micrometers allowed us to isolate 1-3 cells per microstructure. Viability assays demonstrated that cells remained viable inside these hydrogels after encapsulation for up to 7 days.

Poly(ethylene glycol) hydrogel microstructures encapsulating living cells.

Biomimetic strain hardening in interpenetrating polymer network hydrogels

The fabrication of mammalian cell-containing poly(ethylene glycol) (PEG) hydrogel microstructures on glass and silicon substrates is described. Using photoreaction injection molding in poly(dimethylsiloxane) microfluidic channels, three-dimensional hydrogel microstructures encapsulating cells (fibroblasts, hepatocytes, macrophage) were fabricated with cells uniformly distributed to each hydrogel microstructure, and the number of cells in each hydrogel microstructure was controlled by changing the cell density of the precursor solution. PEG hydrogels were modified using an Arg-Gly-Asp (RGD) peptide sequence, with the incorporation of RGD into the hydrogel matrix promoting the spreading of encapsulated fibroblasts over a 24-h period in culture. Cells remained viable encapsulated in these hydrogel microstructures for a period in excess of 1 week in culture. Arrays of hydrogel microstructures encapsulating two or more phenotypes on a single substrate were successfully fabricated using multimicrofluidic channels, creating the potential for multiphenotype cell-based biosensors.

Won Gun Koh

Papers

Fabrication of poly(ethylene glycol) hydrogel microstructures using photolithography

Metal enhanced fluorescence (MEF) for biosensors: General approaches and a review of recent developments

Poly(ethylene glycol) hydrogel microstructures encapsulating living cells.

Biomimetic strain hardening in interpenetrating polymer network hydrogels

Molding of hydrogel microstructures to create multiphenotype cell microarrays.