In the present review we try to give a comprehensive and most up to date view to the field, with an emphasis on the currently most investigated anodic TiO2 nanotube arrays. We will first give an overview of different synthesis approaches to produce TiO2 nanotubes and TiO2 nanotube arrays, and then deal with physical and chemical properties of TiO2 nanotubes and techniques to modify them. Finally, we will provide an overview of the most explored and prospective applications of nanotubular TiO2.

One-dimensional titanium dioxide nanomaterials: nanotubes.

Titanium dioxide (TiO2) has been the most intensively investigated binary transition metal oxide in the past four decades as indicated by Figure S1. Furthermore, the annual number of papers published on TiO2 has seen a continuous increase, particularly since the beginning of this century (Figure S2). This is understandable when one considers the wide range of applications of TiO2 from the conventional areas (i.e., pigment, cosmetic, toothpaste, and paint) to the later developed functional areas such as photoelectrochemical cell,(1-3) dye-sensitized solar cells (DSSCs),(4-11) photocatalysis,(12-24) catalysis,(25-31) photovoltaic cell,(32-34) lithium ion batteries,(35-41) sensors,(42-46) electron field emission,(47-51) microwave absorbing material, biomimetic growth, and biomedical treatments.(52-57) Nearly all these functional applications of TiO2 fall in the scope of energy, environment, and health, which are definitely the three most important and challenging themes facing the Human race that need to be addressed in this century. Besides the apparent merits including nontoxicity, elemental abundance, good chemical stability, and easy synthesis, TiO2 has attracted strong research interest worldwide due to its physicochemical properties for realizing various functions.(15, 58, 59) Especially, very encouraging progresses in photocatalysis and DSSCs with the involvement of TiO2 have greatly stimulated the rapid development of TiO2 crystals with controllable phase, size, shape, defect, and heteroatom.(58, 60-68)

Titanium dioxide crystals with tailored facets

Photocatalytic approaches, that is the reaction of light-produced charge carriers at a semiconductor surface with their environment, currently attract an extremely wide scientific interest. This is to a large extent due to the high expectations: i) to convert sunlight directly into an energy carrier (H(2)), ii) to stimulate chemical synthetic reactions, or iii) to degrade unwanted environmental pollutants. Since the early reports in 1972, TiO(2) has been the most investigated photocatalytic material by far; this originates from its outstanding electronic properties that allow for a wide range of applications. Not only the material, but also its structure and morphology, can have a considerable influence on the photocatalytic performance of TiO(2). In recent years, particularly 1D (or pseudo 1D) structures such as nanowires and nanotubes have received great attention. The present Review focuses on TiO(2) nanotube arrays (and similar structures) that grow by self-organizing electrochemistry (highly aligned) from a Ti metal substrate. Herein, the growth, properties, and applications of these tubes are discussed, as well as ways and means to modify critical tube properties. Common strategies are addressed to improve the performance of photocatalysts such as doping or band-gap engineering, co-catalyst decoration, junction formation, or applying external bias. Finally, some unique applications of the ordered tube structures in various photocatalytic approaches are outlined.

A Review of Photocatalysis using Self-organized TiO2 Nanotubes and Other Ordered Oxide Nanostructures

p−n junction BiOI/TiO2 nanotube arrays (NTs) were prepared by coating BiOI on the tube wall of the self-organized TiO2 NTs using a novel impregnating−hydroxylation method. The as-prepared samples w...

Synthesis and Enhanced Visible-Light Photoelectrocatalytic Activity of p−n Junction BiOI/TiO2 Nanotube Arrays

Solar driven photoelectrochemical water splitting (PEC-WS) using semiconductor photoelectrodes represents a promising approach for a sustainable and environmentally friendly production of renewable energy vectors and fuel sources, such as dihydrogen (H2). In this context, titanium dioxide (TiO2) and iron oxide (hematite, α-Fe2O3) are among the most investigated candidates as photoanode materials, mainly owing to their resistance to photocorrosion, non-toxicity, natural abundance, and low production cost. Major drawbacks are, however, an inherently low electrical conductivity and a limited hole diffusion length that significantly affect the performance of TiO2 and α-Fe2O3 in PEC devices. To this regard, one-dimensional (1D) nanostructuring is typically applied as it provides several superior features such as a significant enlargement of the material surface area, extended contact between the semiconductor and the electrolyte and, most remarkably, preferential electrical transport that overall suppress charge carrier recombination and improve TiO2 and α-Fe2O3 photoelectrocatalytic properties. The present review describes various synthetic methods and modifying concepts of 1D-photoanodes (nanotubes, nanorods, nanofibers, nanowires) based on titania, hematite, and on α-Fe2O3/TiO2 heterostructures, for PEC applications. Various routes towards modification and enhancement of PEC activity of 1D photoanodes are discussed including doping, decoration with co-catalysts and heterojunction engineering. Finally, the challenges related to the optimization of charge transfer kinetics in both oxides are highlighted.

Photoanodes based on TiO2 and α-Fe2O3 for solar water splitting – superior role of 1D nanoarchitectures and of combined heterostructures

Differently sized Cu2O nanoparticles have been assembled photocatalytically on the surface of self-organized highly oriented TiO2 nanotubes obtained by anodization of a Ti sheet in fluoride-containing electrolytes. X-ray diffraction analysis identifies an anatase structure and fine preferential orientation of (101) planes. The UV-vis absorption edge of the TiO2 nanotube arrays shift to lower energy after Cu2O loading. The composite array electrode exhibits a higher photovoltage response than the TiO2 powders directly deposited on a Ti sheet. The highest photoconversion efficiencies observed for the Cu2O-loaded electrode are 17.2% and 0.82% under UV light and visible light irradiation, respectively. Especially, the composite array electrode shows a higher efficiency than the nonloaded one for the photoelectrocatalytic decomposition of 4-chlorophenol. The improved photoeletrocatalytic activity of the TiO2/Cu2O composite array electrode is attributed to the synergistic effect of Cu2O nanoparticles and TiO2 nanotube arrays. The Cu2O nanoparticles could enhance the efficiency of photon harvesting and reduce the chances of electron-hole recombination by sending the electrons to the conduction band of TiO2 nanotubes. The accumulated electrons in the conduction band of TiO2 nanotubes would reduce oxygen to form peroxides for enhanced advanced oxidation. The byproducts were identified by high-performance liquid chromatography.

Xuejun Zou

Papers

Photoeletrocatalytic activity of a Cu2O-loaded self-organized highly oriented TiO2 nanotube array electrode for 4-chlorophenol degradation.

Synthesis of ZnO/TiO2 nanotube composite film by a two-step route

Synthesis and photo activity of flower-like anatase TiO2 with {001} facets exposed

Fabrication and photo-electrocatalytic properties of highly oriented titania nanotube arrays with {101} crystal face