This paper presents an active–adaptive tuned vibration absorber (AATVA) which is based on magnetorheological elastomer (MRE). A voice coil motor is attached to a conventional MRE adaptive tuned vibration absorber (ATVA) to improve its performance. In this study, two feedback types of the activation force were analyzed and the stability condition was obtained. In order to eliminate the time delay effect during the signal processing, a phase-lead compensator was incorporated. Based on the analysis, an MRE AATVA prototype was designed and its dynamic properties were experimentally investigated. The experimental results demonstrated that its resonant frequency could vary from 11 to 18 Hz and its damping ratio decreased to roughly 0.05 from 0.19 by adding the activation force. Besides, its vibration reduction abilities at the first two resonant frequencies of the experimental platform could reach 5.9 dB and 7.9 dB respectively. (Some figures in this article are in colour only in the electronic version)

https://iopscience.iop.org/article/10.1088/0964-1726/20/7/075015/pdf

The design of an active–adaptive tuned vibration absorber based on magnetorheological elastomer and its vibration attenuation performance

This article presents the development of an active-damping-compensated magnetorheological elastomer (MRE) adaptive tuned vibration absorber (ATVA). The principle and the vibration attenuation performance of the proposed active-damping-compensated ATVA were theoretically analyzed. Based on the analysis, a prototype was designed and manufactured. Its dynamic properties and vibration attenuation performances were experimentally investigated. The experimental results demonstrated that the damping ratio of the prototype was significantly reduced by the active force. Consequently, its vibration attenuation capability was significantly improved compared with a conventional MRE ATVA.

An Active-damping-compensated Magnetorheological Elastomer Adaptive Tuned Vibration Absorber

In the past, adaptive tuned vibration absorbers (ATVAs) based on magnetorheological elastomers (MREs) have mainly been developed in a shear working mode. The enhancing effect of MREs in squeeze mode has already been investigated, but ATVAs in squeeze mode have rarely been studied. This paper reports the development of a compact squeeze MRE absorber and its subsequent performance in various magnetic fields characterized under various frequencies by a vibration testing system. The results revealed that the natural frequency of the MRE absorber working in squeeze mode can be tuned from 37 Hz to 67 Hz. Following this, a theoretical model based on magnetic dipole theory was developed to investigate the dynamic performance of the squeeze MRE absorber, and the vibration attenuation of the squeeze MRE absorber was then verified by mounting it on a beam with supports under both ends. The results revealed that the squeeze MRE absorber extended its vibration attenuation range from 37 Hz to 67 Hz while the passive absorber was only effective around 53 Hz.

/pdf/the-development-of-an-adaptive-tuned-magnetorheological-5fqoez7lgi.pdf

Y. Shitani

Papers

Vibration control of a structure by using a tunable absorber and an optimal vibration absorber under auto-tuning control