Biomass-derived carbon: synthesis and applications in energy storage and conversion

Carbon materials are generally preferred as anodes in supercapacitors; however, their low capacitance limits the attained energy density of supercapacitor devices with aqueous electrolytes. Here, we report a low-crystalline iron oxide hydroxide nanoparticle anode with comprehensive electrochemical performance at a wide potential window. The iron oxide hydroxide nanoparticles present capacitances of 1,066 and 716 F g−1 at mass loadings of 1.6 and 9.1 mg cm−2, respectively, a rate capability with 74.6% of capacitance retention at 30 A g−1, and cycling stability retaining 91% of capacitance after 10,000 cycles. The performance is attributed to a dominant capacitive charge-storage mechanism. An aqueous hybrid supercapacitor based on the iron oxide hydroxide anode shows stability during float voltage test for 450 h and an energy density of 104 Wh kg−1 at a power density of 1.27 kW kg−1. A packaged device delivers gravimetric and volumetric energy densities of 33.14 Wh kg−1 and 17.24 Wh l−1, respectively. Carbons dominate anode materials for supercapacitors, however the attained energy density remains low. Here the authors fabricate low-crystalline iron oxide-hydroxide nanoparticle anodes with good electrochemical characteristics, exhibiting high stability and energy/power densities in a hybrid supercapacitor.

/pdf/low-crystalline-iron-oxide-hydroxide-nanoparticle-anode-for-4rby8x8q36.pdf

Low-crystalline iron oxide hydroxide nanoparticle anode for high-performance supercapacitors.

In this study, a general and effective phosphorization strategy is successfully demonstrated to enhance supercapacitor performance of various transition metals oxide or hydroxide, such as Ni(OH)2, Co(OH)2, MnO2, and Fe2O3. For example, a 3D networked Ni2P nanosheets array via a facile phosphorization reaction of Ni(OH)2 nanosheets is grown on the surface of a Ni foam. The Ni foam-supported Ni2P nanosheet (Ni2P NS/NF) electrode shows a remarkable specific capacitance of 2141 F g−1 at a scan rate of 50 mV s−1 and remains as high as 1109 F g−1 even at the current density of 83.3 A g−1. The specific capacitance is much larger than those of Ni(OH)2 NS/NF (747 F g−1 at 50 mV s−1). Furthermore, the electrode retains a high specific capacitance of 1437 F g−1 even after 5000 cycles at a current density of 10 A g−1, in sharp contrast with only 403 F g−1 of Ni(OH)2 NS/NF at the same current density. The similar enhanced performance is observed for Ni2P powder, which eliminates the influence of nickel foam. The enhanced supercapacitor performances are attributed to the 3D porous nanosheets network, enhanced conductivity, and two active components of Ni2+ and Pδ− with rich valences of Ni2P.

Ultrahigh‐Performance Pseudocapacitor Electrodes Based on Transition Metal Phosphide Nanosheets Array via Phosphorization: A General and Effective Approach

Nickel-based pillared MOFs for high-performance supercapacitors: Design, synthesis and stability study

Sulfur-doped cobalt phosphide nanotube arrays for highly stable hybrid supercapacitor

The utilization of Ni(OH)2 as a pseudocapacitive material for high performance supercapacitors is hindered by its low electrical conductivity and short cycle life. A coaxial ternary hybrid material comprising of amorphous Ni(OH)2 deposited on multiwalled carbon nanotubes wrapped with conductive polymer (poly (3,4-ethylenedioxythiophene)-poly(styrenesulfonate)) is demonstrated. A thin layer of disordered amorphous Ni(OH)2 is deposited by an effective “coordinating etching and precipitating” method, resulting in an ultrahigh specific capacitance of 3262 F g−1 at 5 mV s−1 and excellent rate capability (71.9% capacitance retention at 100 mV s−1). More importantly, the polymer layer prevents the degradation of the nanostructure and dis­solution of Ni ion during repeated charge–discharge cycling for 30 000 cycles, a phenomenon which often plagues Ni(OH)2 nanomaterials. Using the ternary Ni(OH)2 hybrid and the reduced graphene oxide/carbon nanotube hybrid as the positive and negative electrodes, respectively, the assembled asymmetric supercapacitors exhibit high energy density of 58.5 W h kg−1 at the power density of 780 W kg−1 as well as long cycle life (86% capacitance retention after 30 000 cycles). The ternary hybrid architecture design for amorphous Ni(OH)2 can be regarded as a general approach to obtain pseudocapacitive materials for supercapacitors with both high energy density, excellent rate capability, and long cycle life.

Ternary hybrids of amorphous nickel hydroxide-carbon nanotube-conducting polymer for supercapacitors with high energy density, excellent rate capability, and long cycle life

Yili Yong

Papers

Ternary hybrids of amorphous nickel hydroxide-carbon nanotube-conducting polymer for supercapacitors with high energy density, excellent rate capability, and long cycle life