There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies, are compared over the 0.5–100 GHz range.

/pdf/overview-of-millimeter-wave-communications-for-fifth-3yhmjybx4f.pdf

Overview of Millimeter Wave Communications for Fifth-Generation (5G) Wireless Networks—With a Focus on Propagation Models

The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.

/pdf/towards-6g-wireless-communication-networks-vision-enabling-2tj7a36yux.pdf

Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts

The recently proposed orthogonal time–frequency–space (OTFS) modulation technique was shown to provide significant error performance advantages over orthogonal frequency division multiplexing (OFDM) over delay-Doppler channels. In this paper, we first derive the explicit input–output relation describing OTFS modulation and demodulation (mod/demod). We then analyze the cases of: 1) ideal pulse-shaping waveforms that satisfy the bi-orthogonality conditions and 2) rectangular waveforms which do not. We show that while only inter-Doppler interference (IDI) is present in the former case, additional inter-carrier interference (ICI) and inter-symbol interference (ISI) occur in the latter case. We next characterize the interferences and develop a novel low-complexity yet efficient message passing (MP) algorithm for joint interference cancellation (IC) and symbol detection. While ICI and ISI are eliminated through appropriate phase shifting, IDI can be mitigated by adapting the MP algorithm to account for only the largest interference terms. The MP algorithm can effectively compensate for a wide range of channel Doppler spreads. Our results indicate that OTFS using practical rectangular waveforms can achieve the performance of OTFS using ideal but non-realizable pulse-shaping waveforms. Finally, simulation results demonstrate the superior error performance gains of the proposed uncoded OTFS schemes over OFDM under various channel conditions.

Interference Cancellation and Iterative Detection for Orthogonal Time Frequency Space Modulation

In this paper, we model $M\times N$ orthogonal time frequency space modulation (OTFS) over a $P$ -path doubly dispersive channel with delays less than $\tau _{\max }$ and Doppler shifts in the range $(\nu _{\min },\nu _{\max })$ . We first derive in a simple matrix form the input–output relation in the delay-Doppler domain for practical (e.g., rectangular) pulse-shaping waveforms, next generalize it to arbitrary waveforms. This relation extends the original OTFS input–output approach, which assumes ideal pulse-shaping waveforms that are bi-orthogonal in both time and frequency. We show that the OTFS input–output relation has a simple sparse structure that enables one to use low-complexity detection algorithms. Different from previous work, only a single cyclic prefix is added at the end of the OTFS frame, significantly reducing the overhead, without incurring any penalty from the loss of bi-orthogonality of the pulse-shaping waveforms. Finally, we compare the OTFS performance with different pulse-shaping waveforms, and show that the reduction of out-of-band power may introduce nonuniform channel gains for the transmitted symbols, thus impairing the overall error performance.

Practical Pulse-Shaping Waveforms for Reduced-Cyclic-Prefix OTFS

This paper introduces a new two-dimensional modulation technique called Orthogonal Time Frequency Space (OTFS) modulation. OTFS has the novel and important feature of being designed in the delay-Doppler domain. When coupled with a suitable equalizer, OTFS modulation is able to exploit the full channel diversity over both time and frequency. Moreover, it converts the fading, time-varying wireless channel experienced by modulated signals such as OFDM into a time-independent channel with a complex channel gain that is essentially constant for all symbols. 
This design obviates the need for transmitter adaptation, and greatly simplifies system operation. The paper describes the basic operating principles of OTFS as well as a possible implementation as an overlay to current or anticipated standardized systems. OTFS is shown to provide significant performance improvement in systems with high Doppler, short packets, and/or large antenna array. In particular, simulation results indicate at least several dB of block error rate performance improvement for OTFS over OFDM in all of these settings.

Yoav Hebron

Papers

Orthogonal Time Frequency Space Modulation