Wettability is one of a solid surface’s fundamental physical and chemical properties, which involves a wide range of applications. Femtosecond laser microfabrication has many advantages compared to traditional laser processing. This technology has been successfully applied to control the wettability of material surfaces. This review systematically summarizes the recent progress of femtosecond laser microfabrication in the preparation of various superwetting surfaces. Inspired by nature, the superwettabilities such as superhydrophilicity, superhydrophobicity, superamphiphobicity, underwater superoleophobicity, underwater superaerophobicity, underwater superaerophilicity, slippery liquid-infused porous surface, underwater superpolymphobicity, and supermetalphobicity are obtained on different substrates by the combination of the femtosecond laser-induced micro/nanostructures and appropriate chemical composition. From the perspective of biomimetic preparation, we mainly focus the methods for constructing various kinds of superwetting surfaces by femtosecond laser and the relationship between different laser-induced superwettabilities. The special wettability of solid materials makes the femtosecond laser-functionalized surfaces have many practical applications. Finally, the significant challenges and prospects of this field (femtosecond laser-induced superwettability) are discussed.

Nature-Inspired Superwettability Achieved by Femtosecond Lasers

Interfacing of surfaces with gallium-based liquid metals – approaches for mitigation and augmentation of liquid metal adhesion on surfaces

Liquid metals adhere to most surfaces despite their high surface tension due to the presence of a native gallium oxide layer. The ability to change the shape of functional fluids within a three-dimensional (3D) printed part with respect to time is a type of four-dimensional printing, yet surface adhesion limits the ability to pump liquid metals in and out of cavities and channels without leaving residue. Rough surfaces prevent adhesion, but most methods to roughen surfaces are difficult or impossible to apply on the interior of parts. Here, we show that silica particles suspended in an appropriate solvent can be injected inside cavities to coat the walls. This technique creates a transparent, nanoscopically rough (10-100 nm scale) coating that prevents adhesion of liquid metals on various 3D printed plastics and commercial polymers. Liquid metals roll and even bounce off treated surfaces (the latter occurs even when dropped from heights as high as 70 cm). Moreover, the coating can be removed locally by laser ablation to create selective wetting regions for metal patterning on the exterior of plastics. To demonstrate the utility of the coating, liquid metals were dynamically actuated inside a 3D printed channel or chamber without pinning the oxide, thereby demonstrating electrical circuits that can be reconfigured repeatably.

Yongning He

Papers

Femtosecond laser preparing patternable liquid-metal-repellent surface for flexible electronics