2.1. Solvents 4307 2.1.1. Propylene Carbonate (PC) 4308 2.1.2. Ethers 4308 2.1.3. Ethylene Carbonate (EC) 4309 2.1.4. Linear Dialkyl Carbonates 4310 2.2. Lithium Salts 4310 2.2.1. Lithium Perchlorate (LiClO4) 4311 2.2.2. Lithium Hexafluoroarsenate (LiAsF6) 4312 2.2.3. Lithium Tetrafluoroborate (LiBF4) 4312 2.2.4. Lithium Trifluoromethanesulfonate (LiTf) 4312 2.2.5. Lithium Bis(trifluoromethanesulfonyl)imide (LiIm) and Its Derivatives 4313

/pdf/nonaqueous-liquid-electrolytes-for-lithium-based-uxm5ffbi18.pdf

Nonaqueous liquid electrolytes for lithium-based rechargeable batteries.

This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The methodology of composite processing and resulting properties are fully covered, with an emphasis on neat and high fraction cellulose composites. Additionally, advances in predictive modeling from molecular dynamic simulations of crystalline cellulose to the continuum modeling of composites made with such particles are reviewed (392 references).

/pdf/cellulose-nanomaterials-review-structure-properties-and-2z8x922p3v.pdf

Cellulose nanomaterials review: structure, properties and nanocomposites

Cellulose fibrils with widths in the nanometer range are nature-based materials with unique and potentially useful features. Most importantly, these novel nanocelluloses open up the strongly expanding fields of sustainable materials and nanocomposites, as well as medical and life-science devices, to the natural polymer cellulose. The nanodimensions of the structural elements result in a high surface area and hence the powerful interaction of these celluloses with surrounding species, such as water, organic and polymeric compounds, nanoparticles, and living cells. This Review assembles the current knowledge on the isolation of microfibrillated cellulose from wood and its application in nanocomposites; the preparation of nanocrystalline cellulose and its use as a reinforcing agent; and the biofabrication of bacterial nanocellulose, as well as its evaluation as a biomaterial for medical implants.

Nanocelluloses: A New Family of Nature-Based Materials

Energy production and storage technologies have attracted a great deal of attention for day-to-day applications. In recent decades, advances in lithium-ion battery (LIB) technology have improved living conditions around the globe. LIBs are used in most mobile electronic devices as well as in zero-emission electronic vehicles. However, there are increasing concerns regarding load leveling of renewable energy sources and the smart grid as well as the sustainability of lithium sources due to their limited availability and consequent expected price increase. Therefore, whether LIBs alone can satisfy the rising demand for small- and/or mid-to-large-format energy storage applications remains unclear. To mitigate these issues, recent research has focused on alternative energy storage systems. Sodium-ion batteries (SIBs) are considered as the best candidate power sources because sodium is widely available and exhibits similar chemistry to that of LIBs; therefore, SIBs are promising next-generation alternatives. Recently, sodiated layer transition metal oxides, phosphates and organic compounds have been introduced as cathode materials for SIBs. Simultaneously, recent developments have been facilitated by the use of select carbonaceous materials, transition metal oxides (or sulfides), and intermetallic and organic compounds as anodes for SIBs. Apart from electrode materials, suitable electrolytes, additives, and binders are equally important for the development of practical SIBs. Despite developments in electrode materials and other components, there remain several challenges, including cell design and electrode balancing, in the application of sodium ion cells. In this article, we summarize and discuss current research on materials and propose future directions for SIBs. This will provide important insights into scientific and practical issues in the development of SIBs.

/pdf/sodium-ion-batteries-present-and-future-gf1bd0vhq4.pdf

Sodium-ion batteries: present and future

Lithium (Li)-ion batteries (LIB) have governed the current worldwide rechargeable battery market due to their outstanding energy and power capability. In particular, the LIB's role in enabling electric vehicles (EVs) has been highlighted to replace the current oil-driven vehicles in order to reduce the usage of oil resources and generation of CO2 gases. Unlike Li, sodium is one of the more abundant elements on Earth and exhibits similar chemical properties to Li, indicating that Na chemistry could be applied to a similar battery system. In the 1970s-80s, both Na-ion and Li-ion electrodes were investigated, but the higher energy density of Li-ion cells made them more applicable to small, portable electronic devices, and research efforts for rechargeable batteries have been mainly concentrated on LIB since then. Recently, research interest in Na-ion batteries (NIB) has been resurrected, driven by new applications with requirements different from those in portable electronics, and to address the concern on Li abundance. In this article, both negative and positive electrode materials in NIB are briefly reviewed. While the voltage is generally lower and the volume change upon Na removal or insertion is larger for Na-intercalation electrodes, compared to their Li equivalents, the power capability can vary depending on the crystal structures. It is concluded that cost-effective NIB can partially replace LIB, but requires further investigation and improvement.

/pdf/electrode-materials-for-rechargeable-sodium-ion-batteries-1cf2yiiw7z.pdf

Electrode Materials for Rechargeable Sodium-Ion Batteries: Potential Alternatives to Current Lithium-Ion Batteries

Lithium ion secondary batteries; past 10 years and the future

A preliminary experiment has shown that a sheet-shaped material prepared from bacterial cellulose has remarkable mechanical properties, the Young's modulus being as high as >15 GPa across the plane of the sheet. The mechanical properties were little affected by the fermentation conditions of pellicles and the preparation conditions of the sheets, i.e. the pressing and drying of pellicles. From structural investigations, the high Young's modulus has been ascribed to the unique super-molecular structure in which fibrils of biological origin are preserved and bound tightly by hydrogen bonds. It has also been found that a “pulp” obtained from bacterial cellulose gives a strong paper and is useful for reinforcing conventional pulp papers and enabling paper-making from some fibrous materials.

The structure and mechanical properties of sheets prepared from bacterial cellulose

Olivine-type cathodes: Achievements and problems

Lithium ion secondary batteries (LIBs) were successfully developed as battery systems with high volumetric and gravimetric energy densities, which were inherited from lithium secondary batteries (LSBs) with metallic lithium anodes. LSBs have several drawbacks, however, including poor cyclability and quick-charge rejection. The cell reaction in LIB is merely a topochemical one, namely the migration of lithium ions between positive and negative electroces. No chemical changes were observed in the two electrodes or in the electrolytes. This results in little chemical transformation of the active electrode materials and electrolytes, and thus, LIBs can overcome the weaknesses of LSBs; for example, LIBs show excellent cyclability and quick-charge acceptance. Many difficulties, however, were encountered during the course of development, including capacity fade during cycling and safety issues. This article is the story of the development of LIBs and it describes how the difficulties were surmounted.

The development of lithium ion secondary batteries.

A sheet obtained from bacterial cellulose had a remarkably high modulus of elasticity as reported in Part 1 of this series. The Young's modulus of a sheet prepared by squeezing and drying a gel-like pellicle of bacterial cellulose was found to be >15 GPa. In addition, it has been found that treatment of the gel-like pellicles or dried sheets of bacterial cellulose with alkaline and/or oxidative solutions improves the mechanical properties significantly, and the Young's modulus of the resulting sheets approaches 30 GPa. In this paper, improvement of the mechanical properties of bacterial cellulose sheets by the removal of impurities is investigated and the applicability of bacterial cellulose to diaphragms of electroacoustic transducers is discussed

The structure and mechanical properties of sheets prepared from bacterial cellulose Part 2 Improvement of the mechanical properties of sheets and their applicability to diaphragms of electroacoustic transducers

Yoshio Nishi

Papers

Lithium ion secondary batteries; past 10 years and the future

The structure and mechanical properties of sheets prepared from bacterial cellulose

Olivine-type cathodes: Achievements and problems

The development of lithium ion secondary batteries.

The structure and mechanical properties of sheets prepared from bacterial cellulose Part 2 Improvement of the mechanical properties of sheets and their applicability to diaphragms of electroacoustic transducers