Heterogenous electrocatalysts based on transition metal sulfides (TMS) are being actively explored in renewable energy research because nanostructured forms support high intrinsic activities for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Herein, it is described how researchers are working to improve the performance of TMS-based materials by manipulating their internal and external nanoarchitectures. A general introduction to the water-splitting reaction is initially provided to explain the most important parameters in accessing the catalytic performance of nanomaterials catalysts. Later, the general synthetic methods used to prepare TMS-based materials are explained in order to delve into the various strategies being used to achieve higher electrocatalytic performance in the HER. Complementary strategies can be used to increase the OER performance of TMS, resulting in bifunctional water-splitting electrocatalysts for both the HER and the OER. Finally, the current challenges and future opportunities of TMS materials in the context of water splitting are summarized. The aim herein is to provide insights gathered in the process of studying TMS, and describe valuable guidelines for engineering other kinds of nanomaterial catalysts for energy conversion and storage technologies.

https://espace.library.uq.edu.au/view/UQ:df1181f/UQdf1181f_OA.pdf

Nanoarchitectonics for Transition-Metal-Sulfide-Based Electrocatalysts for Water Splitting.

In recent years, nanocrystals of metal sulfide materials have attracted scientific research interest for renewable energy applications due to the abundant choice of materials with easily tunable electronic, optical, physical and chemical properties. Metal sulfides are semiconducting compounds where sulfur is an anion associated with a metal cation; and the metal ions may be in mono-, bi- or multi-form. The diverse range of available metal sulfide materials offers a unique platform to construct a large number of potential materials that demonstrate exotic chemical, physical and electronic phenomena and novel functional properties and applications. To fully exploit the potential of these fascinating materials, scalable methods for the preparation of low-cost metal sulfides, heterostructures, and hybrids of high quality must be developed. This comprehensive review indicates approaches for the controlled fabrication of metal sulfides and subsequently delivers an overview of recent progress in tuning the chemical, physical, optical and nano- and micro-structural properties of metal sulfide nanocrystals using a range of material fabrication methods. For hydrogen energy production, three major approaches are discussed in detail: electrocatalytic hydrogen generation, powder photocatalytic hydrogen generation and photoelectrochemical water splitting. A variety of strategies such as structural tuning, composition control, doping, hybrid structures, heterostructures, defect control, temperature effects and porosity effects on metal sulfide nanocrystals are discussed and how they are exploited to enhance performance and develop future energy materials. From this literature survey, energy conversion currently relies on a limited range of metal sulfides and their composites, and several metal sulfides are immature in terms of their dissolution, photocorrosion and long-term durability in electrolytes during water splitting. Future research directions for innovative metal sulfides should be closely allied to energy and environmental issues, along with their advanced characterization, and developing new classes of metal sulfide materials with well-defined fabrication methods.

Recent advances in metal sulfides: from controlled fabrication to electrocatalytic, photocatalytic and photoelectrochemical water splitting and beyond

Designing and constructing bifunctional electrocatalysts is vital for water splitting. Particularly, the rational interface engineering can effectively modify the active sites and promote the electronic transfer, leading to the improved splitting efficiency. Herein, free-standing and defect-rich heterogeneous MoS2/NiS2 nanosheets for overall water splitting are designed. The abundant heterogeneous interfaces in MoS2/NiS2 can not only provide rich electroactive sites but also facilitate the electron transfer, which further cooperate synergistically toward electrocatalytic reactions. Consequently, the optimal MoS2/NiS2 nanosheets show the enhanced electrocatalytic performances as bifunctional electrocatalysts for overall water splitting. This study may open up a new route for rationally constructing heterogeneous interfaces to maximize their electrochemical performances, which may help to accelerate the development of nonprecious electrocatalysts for overall water splitting.

https://onlinelibrary.wiley.com/doi/pdf/10.1002/advs.201900246

Defect-Rich Heterogeneous MoS2/NiS2 Nanosheets Electrocatalysts for Efficient Overall Water Splitting.

With the increasing demands in energy consumption and increasing environmental concerns, it is of vital significance for developing renewable and clean energy sources to substitute traditional fossil fuels. As an outstanding candidate, hydrogen is recognized as a green energy carrier due to its high gravimetric energy density, zero carbon footprints, and earth-abundance. Currently, water splitting in alkaline electrolytes represents one of the most promising methods for sustainable hydrogen production, and the key challenge lies in the development of high-performance electrocatalysts for the hydrogen evolution reaction (HER). Given the rapid advances in the design and development of efficient catalysts towards the alkaline HER, especially capable transition metal (TM)-based materials, this review aims to summarise recent progress in the theoretical understanding of the alkaline HER and TM-based electrocatalysts. TM-based catalysts classified by their different anionic compositions (metals, alloys, oxides, hydroxides, sulfides, selenides, tellurides, nitrides, phosphides, carbides, and borides) are comprehensively showcased. Special attention is given to mainstream strategies that can improve the catalytic properties of each category, as well as the underlying structure–activity regimes. Additionally, the challenges for the future development of novel catalysts are also analyzed.

/pdf/recent-advances-in-transition-metal-based-electrocatalysts-59rc9vo2xq.pdf

Recent advances in transition metal-based electrocatalysts for alkaline hydrogen evolution

“The Fe Effect”: A review unveiling the critical roles of Fe in enhancing OER activity of Ni and Co based catalysts

The development of bifunctional electrocatalysts with high performance for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) with earth-abundant elements is still a challenge in electrochemical water splitting technology. Herein, we fabricated a free-standing electrocatalyst in the form of vertically oriented Fe-doped Ni3S2 nanosheet array grown on three-dimensional (3D) Ni foam (Fe-Ni3S2/NF), which presented a high activity and durability for both HER and OER in alkaline media. On the basis of systematic experiments and calculation, the Fe-doping was evidenced to increase the electrochemical surface area, improve the water adsorption ability, and optimize the hydrogen adsorption energy of Ni3S2, which resulted in the enhancement of HER activity on Fe-Ni3S2/NF. Moreover, metal sites of Fe-Ni3S2/NF were proved to play a significant role in the HER process. During the catalysis of OER, the formation of Ni–Fe (oxy)hydroxide was observed on the near-surface section of Fe-Ni3S2/NF, and...

Enhanced Catalysis of Electrochemical Overall Water Splitting in Alkaline Media by Fe Doping in Ni3S2 Nanosheet Arrays

: This paper uses plasma-enhanced chemical vapor deposition (PECVD) to successfully fabricate silicon oxide films on silicon dioxide substrates for supporting layers of uncooled infrared focal plane array microbridge structures. In this paper, the thickness, refractive index, growth rate, and other parameters of the films were measured using the XP-2 step meter and ellipsometer. At the same time, atomic force microscopy (AFM) was used to study the surface morphology of the films. The experimental results show that deposition temperature and ICP power are the main factors affecting the growth rate of thin films. Deposition temperature is a crucial factor affecting the surface morphology of thin films.

/pdf/transparent-sioxcyhz-barrier-film-prepared-by-roll-to-roll-2zxco2et.pdf

Yu-Shuo Feng

Papers

Enhanced Catalysis of Electrochemical Overall Water Splitting in Alkaline Media by Fe Doping in Ni3S2 Nanosheet Arrays

Transparent SiOxCyHz Barrier Film Prepared by Roll to Roll PECVD