Electrospinning is a versatile and viable technique for generating ultrathin fibers. Remarkable progress has been made with regard to the development of electrospinning methods and engineering of electrospun nanofibers to suit or enable various applications. We aim to provide a comprehensive overview of electrospinning, including the principle, methods, materials, and applications. We begin with a brief introduction to the early history of electrospinning, followed by discussion of its principle and typical apparatus. We then discuss its renaissance over the past two decades as a powerful technology for the production of nanofibers with diversified compositions, structures, and properties. Afterward, we discuss the applications of electrospun nanofibers, including their use as "smart" mats, filtration membranes, catalytic supports, energy harvesting/conversion/storage components, and photonic and electronic devices, as well as biomedical scaffolds. We highlight the most relevant and recent advances related to the applications of electrospun nanofibers by focusing on the most representative examples. We also offer perspectives on the challenges, opportunities, and new directions for future development. At the end, we discuss approaches to the scale-up production of electrospun nanofibers and briefly discuss various types of commercial products based on electrospun nanofibers that have found widespread use in our everyday life.

Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications

Ambient particulate matter pollution has posed serious threats to global environment and public health. However, highly efficient filtration of submicron particles, the so-named "secondary pollution" caused by, e.g., bacterial growth in filters and the use of nondegradable filter materials, remains a serious challenge. In this study, poly(vinyl alcohol) (PVA) and konjac glucomannan (KGM)-based nanofiber membranes, loaded with ZnO nanoparticles, were prepared through green electrospinning and ecofriendly thermal cross-linking. Thus obtained fibrous membranes not only show highly efficient air-filtration performance but also show superior photocatalytic activity and antibacterial activity. The filtration efficiency of the ZnO@PVA/KGM membranes for ultrafine particles (300 nm) was higher than 99.99%, being superior to that of commercial HEPA filters. By virtue of the high photocatalytic activity, methyl orange was efficiently decolorized with a removal efficiency of more than 98% at an initial concentration of 20 mg L-1 under 120 min of solar irradiation. A multifunctional membrane with high removal efficiency, low flow resistance, superior photocatalytic activity, and superior antibacterial activity was successfully achieved. It is conceivable that the combination of a biodegradable polymer and an active metal particle would form an unprecedented photocatalytic system, which will be quite promising for environmental remediation such as air filtration and water treatment.

https://biblio.ugent.be/publication/8614522/file/8614539.pdf

Ecofriendly Electrospun Membranes Loaded with Visible-Light-Responding Nanoparticles for Multifunctional Usages: Highly Efficient Air Filtration, Dye Scavenging, and Bactericidal Activity

Waterproof and flame-retardant fabrics are widely utilized in many fields, such as automotive interiors, indoor decorations, outdoor clothing and tents. Herein, a facile one-pot sol-gel approach was developed to construct superhydrophobic and flame-retardant (SFR) coatings on cotton fabrics. The cotton fabric was activated by O2 plasma and then immersed into the ethanol suspension containing tetraethoxysilane (TEOS), hydroxyl-terminated polydimethylsiloxane (HPDMS) and ammonium polyphosphate (APP). The hydrogen bonding interaction between APP and cellulose motivated the APP to attach to the cotton fibers during the initial stirring process. After the addition of ammonia, the in situ sol-gel reaction of TEOS and HPDMS was initiated to generate polydimethylsiloxane-silica hybrid (PDMS-silica). The micro-nano structured composite coating on cotton fabric was successfully fabricated by the PDMS-silica and APP. The SFR cotton fabric showed outstanding durability and self-cleaning ability with a water contact angle (WCA) above 160°. When exposed to fire, the SFR cotton fabric quickly charred to extinguish the fire by generating a dense intumescent char layer under the physical barrier effect of PDMS-silica and the intumescent flame-retardant effect of APP. This one-pot approach for fabricating SFR cotton fabric is simple, cost-effective and timesaving, demonstrating significant advantages in practical production.

One-pot fabrication of superhydrophobic and flame-retardant coatings on cotton fabrics via sol-gel reaction

https://dr.ntu.edu.sg/bitstream/10220/48259/1/Rational%20construction%20of%20highly%20transparent%20superhydrophobic%20coatings%20based%20on%20a%20non-particle%2c%20fluorine-free%20and%20water-rich%20system%20for%20versatile%20oil-water%20separation.pdf

Rational construction of highly transparent superhydrophobic coatings based on a non-particle, fluorine-free and water-rich system for versatile oil-water separation

All‐Fiber Structured Electronic Skin with High Elasticity and Breathability

Superhydrophobic waterproof-breathable membranes have attracted considerable interest owing to their multifunctional applications in self-cleaning, anti-icing, anticorrosion, outdoor tents, and protective clothing. Despite the researches pertaning to the construction of superhydrophobic functional membranes by nanoparticle finishing have increased drastically, the disconnected particle component is easy to fall off from the membranes under deformation and wear conditions, which has restricted their wide use in practice. Here, robust superhydrophobic microporous membranes were prepared via a facile and environmentally friendly strategy by dip-coating amino-silicone oil (ASO) onto the electrospun polyacrylonitrile (PAN) membranes, followed by SiO2 nanoparticles (SiO2 NPs) blade coating. Compared with hydrophilic PAN membranes, the modified membranes exhibited superhydrophobic surface with an advancing water contact angle up to 156°, after introducing ASO as low surface energy substance and SiO2 NPs as fille...

Robust Fluorine-Free Superhydrophobic Amino-Silicone Oil/SiO2 Modification of Electrospun Polyacrylonitrile Membranes for Waterproof-Breathable Application.

The demand of water-resistant and breathable materials applied to a separation medium and protective garments is steadily increasing. Typical approaches to obtain these functional materials are based on hydrophobic agents and porous substrates with small fiber diameter, tiny pore, and high porosity. However, a fluorinated hydrophobic finishing agent usually employed in providing effective waterproofness is limited with respect to their environmental persistence and toxic potential. Herein, with the aim to keep a balance between the water-resistance and breathability as well as mechanical properties, we fabricate a novel fluoride-free functional membrane by electrospun polyacrylonitrile (PAN) nanofibers modified with polydimethylsiloxane (PDMS). As determined by morphological, DSC, and FT-IR analyses, the curing reaction of PDMS macromolecules formed an abundance of hydrophobic adhesive structures, which improved the waterproof performance dramatically and imparted relative good breathability at the same t...

Tailoring Water-Resistant and Breathable Performance of Polyacrylonitrile Nanofibrous Membranes Modified by Polydimethylsiloxane

Functional modification of breathable polyacrylonitrile/polyurethane/TiO2 nanofibrous membranes with robust ultraviolet resistant and waterproof performance.

Dentin hypersensitivity (DH) treatment is far from being unequivocal in providing a superior strategy that combines immediate and long-term efficiency of dentinal tubule (DT) occlusion and clinical applicability. In order to achieve this aim, a type of multifunctional yolk-shell nanocomposite with acid resistance, mechanical resistance and biomineralization properties was developed in this study, which consists of a silica/mesoporous titanium-zirconium nanocarrier (STZ) and poly(allylamine hydrochloride) (PAH)-stabilized amorphous calcium phosphate (ACP) liquid precursor. First, the nanocomposite, named as PSTZ, immediately occluded DTs and demonstrated outstanding acid and mechanical resistance. Second, the PSTZ nanocomposite induced intrafibrillar mineralization of single-layer collagen fibrils and remineralization of demineralized dentin matrix. Finally, PSTZ promoted the odontogenic differentiation of dental pulp stem cells by releasing ACP and silicon ions. The reconstruction of the dentin-mimicking hierarchical structure and the introduction of newly formed minerals in the upper, middle and lower segments of DTs, defined as sandwich-like structures, markedly reduced the permeability and achieved superior long-term sealing effects. The nanocomposite material based on mesoporous yolk-shell carriers and liquid-phase mineralized precursors developed in this study represents a versatile biomimetic sandwich desensitization strategy and offers fresh insight into the clinical management of DH.

Biomineralization-inspired sandwich dentin desensitization strategy based on multifunctional nanocomposite with yolk-shell structure.

Introduction: Plaque biofilms, mainly formed by Streptococcus mutans (S. mutans), play an important role in the occurrence and development of dental caries. Antibiotic treatment is the traditional way to control plaque. However, problems such as poor drug penetration and antibiotic resistance have encouraged the search for alternative strategies. In this paper, we hope to avoid antibiotic resistance through the antibacterial effect of curcumin, a natural plant extract with photodynamic effects, on S. mutans. However, the clinical application of curcumin is limited due to its low water solubility, poor stability, high metabolic rate, fast clearance rate, and limited bioavailability. In recent years, liposomes have become a widely used drug carrier due to their numerous advantages, such as high drug loading efficiency, high stability in the biological environment, controlled release, biocompatibility, non-toxic, and biodegradability. So, we constructed a curcumin-loaded liposome (Cur@LP) to avoid the defect of curcumin. Methods: Cur@LP functioned with NHS can adhere to the surface of the S. mutans biofilm by condensation reaction. Liposome (LP) and Cur@LP was characterized by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The cytotoxicity of Cur@LP was evaluated by CCK-8 assay and LDH assay. The adhesion of Cur@LP to S. mutans biofilm was observed by confocal laser scanning microscope (CLSM). The antibiofilm efficiency of Cur@LP were evaluated by crystal violet staining, CLSM, and scanning electron microscope (SEM). Results: The mean diameter of LP and Cur@LP were 206.67 ± 8.38 nm and 312 ± 18.78 nm respectively. The ζ-potential of LP and Cur@LP were ∼−19.3 mV and ∼−20.8 mV respectively. The encapsulation efficiency of Cur@LP was (42.61 ± 2.19) %, and curcumin was rapidly released up to ±21% at 2 h. Cur@LP has negligible cytotoxicity, and can effectively adhered to the S. mutans biofilm and inhibited its growth. Discussion: Curcumin has been widely studied in many fields such as cancer, which can be attributed to its antioxidant and anti-inflammatory effects. At present, there are few studies on the delivery of curcumin to S. mutans biofilm. In this study, we verified the adhesion and antibiofilm of Cur@LP to S. mutans biofilm. This biofilm removal strategy has the potential to be translated into the clinic.

https://www.frontiersin.org/articles/10.3389/fchem.2023.1160521/pdf

Yue Xu

Papers

Robust Fluorine-Free Superhydrophobic Amino-Silicone Oil/SiO2 Modification of Electrospun Polyacrylonitrile Membranes for Waterproof-Breathable Application.

Tailoring Water-Resistant and Breathable Performance of Polyacrylonitrile Nanofibrous Membranes Modified by Polydimethylsiloxane

Functional modification of breathable polyacrylonitrile/polyurethane/TiO2 nanofibrous membranes with robust ultraviolet resistant and waterproof performance.

Biomineralization-inspired sandwich dentin desensitization strategy based on multifunctional nanocomposite with yolk-shell structure.

Functional liposome loaded curcumin for the treatment of Streptococcus mutans biofilm