Transparent electrodes are a necessary component in many modern devices such as touch screens, LCDs, OLEDs, and solar cells, all of which are growing in demand. Traditionally, this role has been well served by doped metal oxides, the most common of which is indium tin oxide, or ITO. Recently, advances in nano-materials research have opened the door for other transparent conductive materials, each with unique properties. These include CNTs, graphene, metal nanowires, and printable metal grids. This review will explore the materials properties of transparent conductors, covering traditional metal oxides and conductive polymers initially, but with a focus on current developments in nano-material coatings. Electronic, optical, and mechanical properties of each material will be discussed, as well as suitability for various applications.

Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures

/pdf/new-approaches-to-nanofabrication-molding-printing-and-other-9d730ga5zp.pdf

New approaches to nanofabrication: molding, printing, and other techniques.

The objective of this review is to make the field of “flame retardants for polymer materials” more accessible to the materials science community, i.e. chemists, physicists and engineers. We present the fundamentals of polymer combustion theory, the main flame retardant properties and tests used to describe fire behavior, together with the nature and modes of action of the most representative flame retardants and the synergistic effects that can be achieved by combining them. We particularly focus on polymer nanocomposites, i.e. polymer matrices filled with specific, finely dispersed nanofillers, which will undoubtedly pave the way for future materials combining physicochemical and thermo-mechanical performances with enhanced flame retardant behavior.

New prospects in flame retardant polymer materials: From fundamentals to nanocomposites

Polymer/layered silicate (clay) nanocomposites: An overview of flame retardancy

Semiconductors for organic transistors

Patterning thin polymer films by surface-directed dewetting and pattern transfer

The fabrication of multilayer microstructures, for example for organic field-effect transistors, using metal transfer printing (MTP) is demonstrated. The Figure shows a two-layer gold structure produced by MTP. Since MTP is a purely additive technique, in which mechanical adhesion acts as the patterning driving force, it is considered an attractive approach to reel-to-reel processing.

Metal Transfer Printing and Its Application in Organic Field‐Effect Transistor Fabrication

Considerable progress toward the development of electronic devices that rely on organic semiconductors as the active material component has been made in recent years. The key step for realization of the advanced organic electronic, or optical, device is the ability to micropattern different kinds of electronic materials, such as organic semiconductor/conducting materials, over large areas with micrometer-sized resolution. Here we demonstrate a simple and direct method for micropatterning small-molecule microcrystalline films using an epoxy stamp. The “hot lift off” method is highly selective, creating patterns with high resolution and relies on straightforwardly tailoring the adhesive properties between the epoxy and the film. This process is well suited for patterning many types of materials.

Micropatterning of Organic Semiconductor Microcrystalline Materials and OFET Fabrication by “Hot Lift Off”

The degradation and flame retardancy of polypropylene/organically modified montmorillonite (PP/OMMT) nanocomposite were studied by means of gas chromatography-mass spectrometry and cone calorimeter. The catalysis of hydrogen proton containing montmorillonite (H-MMT) derived from thermal decomposition of (alkyl) ammonium in the OMMT on degradation of PP strongly influence carbonization behavior of PP and then flame retardancy. Bronsted acid sites on the H-MMT could catalyze degradation reaction of PP via cationic mechanism, which leads to the formation of char during combustion of PP via hydride transfer reaction. A continuous carbonaceous MMT-rich char on the surface of the burned residues, which work as a protective barrier to heat and mass transfer, results from the homogeneous dispersion of OMMT in the PP matrix and appropriate char produced.

Zhe Wang

Papers

Patterning thin polymer films by surface-directed dewetting and pattern transfer

Metal Transfer Printing and Its Application in Organic Field‐Effect Transistor Fabrication

Micropatterning of Organic Semiconductor Microcrystalline Materials and OFET Fabrication by “Hot Lift Off”

Influences of catalysis and dispersion of organically modified montmorillonite on flame retardancy of polypropylene nanocomposites

Solvent and polymer concentration effects on the surface morphology evolution of immiscible polystyrene/poly(methyl methacrylate) blends