Institution
South Eastern Railway
Government•Kolkata, India•
About: South Eastern Railway is a government organization based out in Kolkata, India. It is known for research contribution in the topics: Machining & Cancer. The organization has 27 authors who have published 27 publications receiving 692 citations.
Topics: Machining, Cancer, Machinability, Tool wear, Rhinosporidiosis
Papers
More filters
TL;DR: In this article, the machinability of silicon carbide particulate aluminium metal matrix composite during turning using fixed rhombic tools was investigated during the fabrication of Al/SiC-MMC and the influence of machining parameters, e.g. cutting speed, feed rate and depth of cut on the tools wear and built-up edges (BUEs) were analyzed.
293 citations
TL;DR: In this article, the machinability of silicon carbide particulate aluminium metal matrix composite during turning using a rhombic uncoated carbide tool has been investigated, and the influence of machining parameters, e.g. cutting speed, feed, and depth of cut on the cutting force was investigated.
Abstract: The paper presents the result of an experimental investigation on the machinability of silicon carbide particulate aluminium metal matrix composite during turning using a rhombic uncoated carbide tool. The influence of machining parameters, e.g. cutting speed, feed and depth of cut on the cutting force has been investigated. The influence of the length of machining and cutting time on the tool wear and the influence of various machining parameters, e.g. cutting speed, feed, depth of cut on the surface finish criteria has been analyzed through the various graphical representations. The combined effect of cutting speed and feed on the flank wear has also been investigated. The influence of cutting speed, feed and depth of cut on the tool wears and built-up edge is analyzed graphically. The job surface condition and wear of the cutting tool edge for the different sets of experiments have been examined and compared for searching out the suitable cutting condition for effective machining performance during turning of Al/SiC-MMC. Test results show that no built-up edge is formed during machining of Al/SiC-MMC at high speed and low depth of cut. From the test results and different SEM micrographs, suitable range of cutting speed, feed and depth of cut can be selected for proper machining of Al/SiC-MMC.
128 citations
TL;DR: In this paper, the influence of the cutting time and length of machining on the tool wear and influence of cutting speed, feed rate, depth of cut, inclination angle of tool holder on the surface finish has been established for each of the tooling system.
70 citations
TL;DR: Examination of faeces in these disparate groups showed that whilst vegetable fibres were abundant in the stools of North Indians these were completely absent in those of the South Indians, which may have important implications because of the recent evidence of Popjack, French, and Folley (27) that the fermentation of cellulose and vegetables fibres in the intestines gives rise to large quantities of acetic acid.
67 citations
TL;DR: In neither of these populations was the prevalence of hypertension related to age, occupation, body weight, smoking, chronic pyelonephritis, dietary salt intake, or psychological factors, and the differences appeared to be due to hemodynamic changes probably brought about by dietary factors.
44 citations
Authors
Showing all 27 results
| Name | H-index | Papers | Citations |
|---|---|---|---|
| Manas Kr. Bose | 7 | 18 | 191 |
| S.L. Malhotra | 4 | 4 | 92 |
| Sitikantha Nanda | 4 | 5 | 78 |
| S. L. Malhotra | 2 | 2 | 51 |
| G. Hariharan | 2 | 3 | 8 |
| A. Manna | 2 | 2 | 330 |
| Kavitha Dorairaj | 2 | 4 | 33 |
| N. Dastidar | 1 | 1 | 3 |
| Ashwini Malhotra | 1 | 1 | 3 |
| N. Dastidar | 1 | 2 | 31 |
| Mahamaya Sharma | 1 | 1 | 3 |
| C. R. Khatua | 1 | 2 | 31 |
| Patnaik K | 1 | 1 | 4 |
| Syed Rahman | 1 | 1 | 7 |
| P. K. Chatterjee | 1 | 1 | 3 |