scispace - formally typeset
Open Access

A new methodology of measuring tyre/joint noise in Hong Kong

Reads0
Chats0
About
The article was published on 2009-10-28 and is currently open access. It has received 4 citations till now. The article focuses on the topics: Noise.

read more

Citations
More filters
Journal ArticleDOI

The correlation between the noise and vibration induced by a bridge movement joint

TL;DR: In this article, the authors investigated the correlation between the noise and vibration of a bridge movement joint without lane closure during the operation period and found that the two correlations are linear and similar to each other, even though the roadside noise is nonlinearly increasing against the control vehicle speed.
Journal ArticleDOI

Comparison of Noise Level Measurement of Road Surfaces in the Czech Republic Using the Close Proximity Method

TL;DR: In this paper, the authors used a specially-constructed trailer for road surface noise level measurement using the CPX dynamic method in the Czech Republic, which is in accordance with the ISO 11819-2 standard design.
Journal ArticleDOI

Measurement of Noise from Road Surface Using Dynamic Method

TL;DR: In this article, the CPX method is used for measuring the amount of noise from the rolling of tyres, which consists of drawing a special trailer fitted with reference test tyres that are surrounded by microphones recording the noise generated by the rolling tyres along a test section.
Journal ArticleDOI

The Ageing Effect of Mechanical Joints on the Tyre/Joint Noises Monitored by a Control Vehicle Method without Traffic Disturbance

TL;DR: In this paper, the authors studied the ageing effect of mechanical joints reflecting from the tyre/joint impacting noise by measuring the vehicle structure-borne noise change and developed an empirical relationship based on the field data of the roadside airborne noise change.
References
More filters
Journal ArticleDOI

The correlation between the noise and vibration induced by a bridge movement joint

TL;DR: In this article, the authors investigated the correlation between the noise and vibration of a bridge movement joint without lane closure during the operation period and found that the two correlations are linear and similar to each other, even though the roadside noise is nonlinearly increasing against the control vehicle speed.
Journal ArticleDOI

Comparison of Noise Level Measurement of Road Surfaces in the Czech Republic Using the Close Proximity Method

TL;DR: In this paper, the authors used a specially-constructed trailer for road surface noise level measurement using the CPX dynamic method in the Czech Republic, which is in accordance with the ISO 11819-2 standard design.
Journal ArticleDOI

Measurement of Noise from Road Surface Using Dynamic Method

TL;DR: In this article, the CPX method is used for measuring the amount of noise from the rolling of tyres, which consists of drawing a special trailer fitted with reference test tyres that are surrounded by microphones recording the noise generated by the rolling tyres along a test section.
Journal ArticleDOI

The Ageing Effect of Mechanical Joints on the Tyre/Joint Noises Monitored by a Control Vehicle Method without Traffic Disturbance

TL;DR: In this paper, the authors studied the ageing effect of mechanical joints reflecting from the tyre/joint impacting noise by measuring the vehicle structure-borne noise change and developed an empirical relationship based on the field data of the roadside airborne noise change.