Journal ArticleDOI
Application of Taguchi approach to optimize friction stir spot welding parameters of polypropylene
Reads0
Chats0
TLDR
In this paper, the experimental and numerical results of friction stir spot welding of high density polypropylene were presented, where the experimental tests, conducted according to combinations of process factors such as tool rotation speed, plunge depth and dwell time at beginning welding, were carried out according to the Taguchi orthogonal table L9 in randomized way.About:
This article is published in Materials & Design.The article was published on 2012-03-01. It has received 97 citations till now. The article focuses on the topics: Welding & Spot welding.read more
Citations
More filters
Journal ArticleDOI
Friction stir welding/processing of polymers and polymer matrix composites
TL;DR: Friction stir welding/processing (FSW/P) involving temperature, mechanics, metallurgy and interaction, is a complex solid state joining and processing technology as mentioned in this paper, which has been widely applied to join aluminum alloy, titanium alloy and other materials which are difficult to weld by fusion welding.
Journal ArticleDOI
An experimental study on mechanical properties of friction stir welded ABS sheets
TL;DR: In this article, acrylonitrile butadiene styrene (ABS) sheets were joined using a fixed heated shoe called "hot shoe" while a rotating pin through this shoe stirs melted material.
Journal ArticleDOI
Friction spot joining of aluminum AA6181-T4 and carbon fiber-reinforced poly(phenylene sulfide): Effects of process parameters on the microstructure and mechanical strength
J.V. Esteves,Seyed M. Goushegir,J.F. dos Santos,Leonardo Bresciani Canto,Elias Hage,Sergio T. Amancio-Filho +5 more
TL;DR: In this paper, the individual effect of the process parameters on the microstructure and mechanical strength of hybrid AA6181-T4/CF-PPS double lap joints was investigated using Taguchi method and analysis of variance (ANOVA).
Journal ArticleDOI
Joining of Nylon 6 plate by friction stir welding process using threaded pin profile
K. Panneerselvam,K. Lenin +1 more
TL;DR: In this paper, the effect of the joint formation by the rotation of the threaded pin profile in clockwise direction and counter-clockwise direction was analyzed with a schematic diagram, and it was found that the FSW joint fabricated with counter clockwise directed tool rotation produced defect free welds with better material properties.
Journal ArticleDOI
Mechanical behaviour of polymer–metal hybrid joints produced by clinching using different tools
TL;DR: In this article, the mechanical behavior of polymer-metal hybrid connections produced by clinching is investigated, and the effect of the joining force on joinability is also analyzed, using a single lap shear and peeling test.
References
More filters
Book
Taguchi techniques for quality engineering
TL;DR: Taguchi as discussed by the authors presented Taguchi Techniques for Quality Engineering (TQE), a technique for quality engineering in the field of high-level geometry. Technometrics: Vol. 31, No. 2, pp. 253-255.
Journal ArticleDOI
Design optimization of cutting parameters for turning operations based on the Taguchi method
W.H. Yang,Y.S. Tarng +1 more
TL;DR: In this paper, the Taguchi method was used to find the optimal cutting parameters for turning operations, and the main cutting parameters that affect the cutting performance in turning operations were found.
Journal ArticleDOI
Light weight materials for automotive applications
G.S. Cole,A.M. Sherman +1 more
TL;DR: In this paper, the authors describe some of the technical issues that must be considered if the automotive industry is to utilize these lightweight materials in larger volumes, and conclude with a cost-benefit perspective for typical light-metal applications in automotive industry.
Journal ArticleDOI
Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel
S.C Juang,Y.S. Tarng +1 more
TL;DR: In this article, the selection of process parameters for obtaining an optimal weld pool geometry in the tungsten inert gas (TIG) welding of stainless steel is presented, and the modified Taguchi method is adopted to analyze the effect of each welding process parameter on the weldpool geometry, and then to determine the process parameters with the optimal welding pool geometry.
Journal ArticleDOI
The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing
TL;DR: In this paper, the grey relational analysis is adopted to solve the submerged arc welding (SAW) process with multiple weld qualities, and the optimal process parameters are determined by using the parameter design proposed by the Taguchi method.