scispace - formally typeset
Journal ArticleDOI

Behavior of metallic iron catalysts during Fischer-Tropsch synthesis studied with Mössbauer spectroscopy, X-ray diffraction, carbon content determination, and reaction kinetic measurements

TLDR
In this article, the conversion of unpromoted, unsupported metallic catalysts into carbides during Fischer-Tropsch synthesis (CO:H2:He = 1:1:3, 1 atm) was studied with Mossbauer spectroscopy, X-ray diffraction, carbon content analysis, and reaction kinetic measurements.
Abstract
The conversion of unpromoted, unsupported metallic iron catalysts into carbides during Fischer-Tropsch synthesis (CO:H2:He = 1:1:3, 1 atm) was studied with Mossbauer spectroscopy, X-ray diffraction, carbon content analysis, and reaction kinetic measurements. From a comparison between experiments at different temperatures and literature data, it is concluded that both reaction conditions and the nature of the iron catalyst determine the combination of carbides that will be formed. Investigation of single-phase carbides revealed that the X-ray diffraction pattern commonly ascribed to a pseudohexagonal carbide Fe2C actually belongs to the carbide ∈′-Fe2.2C. At synthesis temperatures of 513 K and lower, unknown iron-carbon species were found, referred to as FexC. It is believed that FexC represents poorly defined structures between α-Fe and a crystallographic carbide. The behavior of metallic iron catalysts during Fischer-Tropseh synthesis at 513 K was studied in more detail as a function of time. It was found that the rate of hydrocarbon formation was initially low, passed through a maximum, and decreased thereupon, while the conversion of α-Fe into carbides started at a high rate and decreased rapidly. These results can be understood as the consequence of either a competition between bulk carbidization and hydrocarbon synthesis or a relatively slow activation of α-Fe for the formation of hydrocarbons in which bulk carbidization plays no role. Deactivation is caused by the formation of an excessive amount of inactive carbon at the surface of the catalyst.

read more

Citations
More filters
Journal ArticleDOI

Short history and present trends of Fischer–Tropsch synthesis

TL;DR: The history and trends of FT synthesis can be divided into several lines which are elaborated individually: • The changing environment of demand and supply of fossil energies and the more stringently upcoming aspects of pollution control, of cleanliness of the automotive fuels and of energy saving.
Journal ArticleDOI

Kinetics and Selectivity of the Fischer–Tropsch Synthesis: A Literature Review

TL;DR: In this article, a critical review of the kinetics and selectivity of the Fischer-Tropsch synthesis (FTS) is given, focusing on reaction mechanisms and kinetics.
Journal ArticleDOI

The renaissance of iron-based Fischer-Tropsch synthesis: on the multifaceted catalyst deactivation behaviour.

TL;DR: This critical review will summarize the current state of knowledge of the underlying mechanisms for the activation and eventual deactivation of iron-based Fischer-Tropsch catalysts and suggest systematic approaches for relating chemical identity to performance in next generation iron- based catalyst systems.
Journal ArticleDOI

Effect of confinement in carbon nanotubes on the activity of Fischer-Tropsch iron catalyst.

TL;DR: It is demonstrated here how this can affect the catalytic reactivity of iron catalysts in Fischer-Tropsch synthesis (FTS), using in situ XRD under conditions close to the reaction conditions, that the distribution of iron carbide and oxide phases is modulated in the CNT-confined system.
Journal ArticleDOI

Iron oxide surfaces

TL;DR: In this paper, a review of the current status of knowledge regarding the surfaces of the iron oxides, magnetite (Fe3O4), maghemite (γ-Fe2O3), haematite (α-Fe 2O3, and wustite (fe1−xO) is reviewed.
Related Papers (5)