We describe a multiplexed, laser-induced fluorescence (LIF) technique with which radial and axial profiles of vector velocities of excited propellant species were obtained in the exhaust plume from a 300-W argon arcjet. Although the arcjet is a prototype, and although argon is not an interesting propellant from a propulsion perspective, the technique clearly demonstrates how a narrowband, frequency-stabilized ring-dye laser can be used to obtain simultaneous measurements of two velocity components in an arcjet plume and how a third signal from an optogalvanic cell can be used as a frequency reference. We also show that much information on the flow can be obtained by analyzing the Doppler widths and fluorescence intensities of the LIF data. Specifically, the data identify a boundary layer in the radial direction of the plume and a shock in the downstream region of the flow. Also, some flow anisotropy is observed, consistent with the assumption that the magnitude of the mean flow velocity fluctuates. The peak velocity on centerline remains roughly constant at 3 km/s throughout the expansion.

Computational simulation of arcjet thruster flow fields

Citations

Two-Beam multiplexed laser-induced fluorescence measurements of an argon arcjet plume

Related Papers (5)

Numerical simulation of supersonic flow in realistic mems nozzle geometries with heat loss

Numerical calculation of nozzle type and cylindrical MPD thrusters

Overcoming Low Nozzle Efficiency: A Test-Correlated Numerical Investigation of Low Reynolds Number Micro-Nozzle Flow

Influence of local configuration on the backflow from small rocket thrusters

CFD Analysis of Modular Thrusters Performance