Journal ArticleDOI
Corrosion of titanium alloys in high temperature near anaerobic seawater
TLDR
In this paper, the authors investigated three grades of Ti alloys: grade 2, grade 5 and grade 7 in near anaerobic (<1 ppm oxygen) seawater up to 200 °C with and without CO2.About:
This article is published in Corrosion Science.The article was published on 2016-04-01. It has received 58 citations till now. The article focuses on the topics: Pitting corrosion & Crevice corrosion.read more
Citations
More filters
Stability and open circuit breakdown passive oxide film on titanium of the
TL;DR: In this paper, it has been shown that the reactivation of an anodic oxide film in acid solution is the result of uniform chemical dissolution of the oxide film, and the rate of dissolution and hence the stability of oxide, was found to depend on the rate at which the oxide had been formed as well as on solution composition and temperature.
Journal ArticleDOI
A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments
Shaokun Yan,Guang-Ling Song,Guang-Ling Song,Zhengxian Li,Haonan Wang,Dajiang Zheng,Fuyong Cao,Miroslava Horynova,Matthew S. Dargusch,Lian Zhou +9 more
TL;DR: In this article, the authors comprehensively review the passivating and biofouling behavior, as well as their mechanisms, for typical Ti alloys in various marine environments, and aim to help extend applications of Ti-alloys in extremely harsh marine conditions.
Journal ArticleDOI
Influence of sulfides on the passivation behavior of titanium alloy TA2 in simulated seawater environments
TL;DR: In this article, the influence of sulfides on the passivation behavior of titanium alloy TA2 in simulated seawater environments was studied by electrochemical methods, surface topology and X-ray photoelectron spectroscopy (XPS).
Journal ArticleDOI
Different corrosion behaviors between α and β phases of Ti6Al4V in fluoride-containing solutions: Influence of alloying element Al
TL;DR: In this paper, the different corrosion behaviors between α and β phases of Ti6Al4V in solutions with different NaF concentrations are investigated, and the formation of a repassive film makes α phases exhibit superior corrosion resistance than β phases as the NaF concentration reaches 0.50
Journal ArticleDOI
Electrochemical corrosion and tribological evaluation of TiAl alloy for marine application
TL;DR: In this paper, the potential of the new light-weight structural TiAl alloy for marine application, the electrochemical corrosion and tribological behavior of TiAl Alloy in a sea water environment have been investigated in a commercial Al 5083 marine product was selected as the control tests.
References
More filters
Book
Atlas of Electrochemical Equilibria in Aqueous Solutions
TL;DR: The Atlas of Electrochemical Equilibria in Aqueous solutions as discussed by the authors is the most complete and complete work on aqueous solvents, which includes a detailed description of the properties of the solvers.
Journal ArticleDOI
Work function, electronegativity, and electrochemical behaviour of metals: III. Electrolytic hydrogen evolution in acid solutions
TL;DR: In this paper, the dependence of the exchange current for the electrolytic evolution of hydrogen on metals (i 0,H ) on the work function is analyzed on the basic of a new list of polycrystalline surfaces.
Journal ArticleDOI
The Ionization Constant of Water over Wide Ranges of Temperature and Density
TL;DR: In this paper, a semitheoretical approach for the ionization constant of water, KW, was used to fit the available experimental data over wide ranges of density and temperature.
Journal ArticleDOI
Stability and open circuit breakdown of the passive oxide film on titanium
TL;DR: In this paper, it has been shown that the reactivation of an anodic oxide film in acid solution is due to uniform chemical dissolution of the oxide film, and that the rate of dissolution and hence the stability of oxide, depend on the rate at which the oxide had been formed as well as on solution composition and temperature.
Stability and open circuit breakdown passive oxide film on titanium of the
TL;DR: In this paper, it has been shown that the reactivation of an anodic oxide film in acid solution is the result of uniform chemical dissolution of the oxide film, and the rate of dissolution and hence the stability of oxide, was found to depend on the rate at which the oxide had been formed as well as on solution composition and temperature.