Curing characteristics and mechanical properties of natural rubber/chloroprene rubber and epoxidized natural rubber/chloroprene rubber blends
H. Ismail,H.C. Leong +1 more
TLDR
In this article, the properties of natural rubber (NR)/chloroprene rubber (CR) and epoxidized natural rubber(ENR)/CR blends were studied, where ENR 50, SMR L and CR were used as the elastomers.About:
This article is published in Polymer Testing.The article was published on 2001-01-01 and is currently open access. It has received 85 citations till now. The article focuses on the topics: Natural rubber & Vulcanization.read more
Citations
More filters
Journal ArticleDOI
Effects of epoxidized natural rubber as a compatibilizer in melt compounded natural rubber–organoclay nanocomposites
TL;DR: In this paper, the effects of ENR with 25 and 50 mol% epoxidation (ENR 50), respectively, were compared at 5 and 10 parts per hundred rubber (phr) concentrations.
Journal ArticleDOI
Natural Rubber-Based Pressure-Sensitive Adhesives: A Review
Imran Khan,B. T. Poh +1 more
TL;DR: In this paper, the authors describe the various aspects of pressure-sensitive adhesives prepared from natural rubber and examine factors affecting adhesion properties such as tack, peel and shear.
Journal ArticleDOI
Effect of blend ratio on aging, oil and ozone resistance of silica-filled chloroprene rubber/natural rubber (CR/NR) blends
TL;DR: In this article, the effect of blend ratio on properties of chloroprene rubber/natural rubber (CR/NR) blends was investigated, and the results reveal that, due to the better filler dispersion and the greater crosslink density, the silica-filled CR possesses lower com- pound viscosity and better mechanical properties, compared to the Silica filled NR.
Journal ArticleDOI
Influence of silica loading on the mechanical properties and resistance to oil and thermal aging of CR/NR blends
TL;DR: In this article, 75/25 chloroprene rubber (CR)/natural rubber (NR) filled with various loadings of precipitated silica were prepared and their processability and mechanical properties as well as their resistance to thermal aging and oil were determined.
Journal ArticleDOI
Effect of Cu+/Cu2+ Ratio on the Catalytic Behavior of Anhydrous Nieuwland Catalyst during Dimerization of Acetylene
TL;DR: In this article, the relative contents of Cu+ and Cu2+ in solutions of anhydrous Nieuwland catalyst and CuCl2-added anh-Nieuwlands catalyst were detected by X-ray photoelectron spectroscopy (XPS) and showed that up to 40% acetylene conversion may be achieved.
References
More filters
Journal ArticleDOI
Modification of Natural Rubber Latex with Peracetic Acid
TL;DR: In this paper, the structure of the products obtained from the reaction of NR latex with peracetic acid depends on the reaction conditions, and specific levels of epoxidize...
Journal ArticleDOI
Preparation, structure, and properties of two‐phase co‐continuous polymer blends
Isabel S. Miles,Andrew Zurek +1 more
TL;DR: In this article, the authors explored phase continuity as a function of composition for three two-phase polymer blends produced by mixing in the melt: polystyrene/poly(methyl methacrylate), poly styrene/cis-polybutadiene, and poly(ethylene-propylene rubber).
Journal ArticleDOI
Strain crystallization in random copolymers produced by epoxidation of cis 1,4-polyisoprene
TL;DR: In this paper, a series of random copolymers were produced containing epoxy co-units on the main chain of a cis 1,4 polyisoprene polyamide.