Journal ArticleDOI
Design of a dynamic vibration absorber against vibrations in turning operations
E.C. Lee,C.Y. Nian,Y.S. Tarng +2 more
Reads0
Chats0
TLDR
In this paper, a dynamic vibration absorber is mounted on a cutting tool against vibrations in turning operations, which can reduce the magnitude of the frequency response function of the cutting tool.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2001-01-17. It has received 81 citations till now. The article focuses on the topics: Dynamic Vibration Absorber & Vibration isolation.read more
Citations
More filters
Journal ArticleDOI
Chatter suppression techniques in metal cutting
Jokin Munoa,Xavier Beudaert,Zoltan Dombovari,Yusuf Altintas,Erhan Budak,Christian Brecher,Gabor Stepan +6 more
TL;DR: A critical review of the different chatter suppression techniques can be found in this paper, where the evolution of each technique is described remarking the most important milestones in research and the corresponding industrial application.
Journal ArticleDOI
A review of chatter vibration research in turning
TL;DR: In this article, some of the chatter stability prediction, chatter detection and chatter control techniques for the turning process are reviewed to summarize the status of current research in this field and to identify a research scope in this area.
Journal ArticleDOI
The effect of vibration and cutting zone temperature on surface roughness and tool wear in eco-friendly MQL turning of AISI D2
Onur Özbek,Hamit Saruhan +1 more
TL;DR: In this article, the AISI D2 cold work tool steel, a material widely used in the mold industry, was used as the workpiece and experiments were carried out using two different cutting tool coating types (CVD-chemical vapor deposition and PVD-physical vapor deposition) and three different cutting speeds (60, 90 and 120m/min) at a constant cutting depth (1 mm) and feed rate (0.09
Journal ArticleDOI
Improvement of chatter stability in boring operations with passive vibration absorbers
TL;DR: In this paper, the behavior of a boring bar with a passive dynamic vibration absorber (DVA) for chatter suppression was investigated. But the analysis of the stability of the two-degree-of-freedom model was not considered, and only its first mode of vibration was considered.
Journal ArticleDOI
Design and implementation of tuned viscoelastic dampers for vibration control in milling
TL;DR: Passive means of vibration attenuation have been employed successfully and efficiently in machining systems such as turning and milling as discussed by the authors, and traditional approach to controlling vibration in a milling s...
References
More filters
Journal ArticleDOI
Modeling of the process damping force in chatter vibration
Bean Yin Lee,Y.S. Tarng,S.C. Ma +2 more
TL;DR: In this article, a feed-forward neural network is used to model cutting force components and the volume of the displaced work material displaced by the tool flank is calculated using the equations of motion iteratively until a convergence criterion is satisfied.
Journal ArticleDOI
A critical investigation of the phase shift between the inner and outer modulation for the control of machine tool Chatter
Y.S. Tarng,E.C. Lee +1 more
TL;DR: In this article, the relationship between the spindle speed and phase shift is clearly studied and the behavior of chatter due to the adjustment of the phase shift between the inner and outer modulation can be understood in detail.