Proceedings ArticleDOI
Folded-Line and Hybrid Folded-Line Bandstop Filters
P.A. Dupuis,E.G. Cristal +1 more
- Vol. 74, Iss: 1, pp 162-164
TLDR
In this paper, the feasibility of a new, compact bandstop filter geometry is demonstrated theoretically and experimentally, and the filter geometry was particularly suited for stripline and MIC fabrications in that grounding is not required for any part of the filter.Abstract:
The feasibility of a new, compact bandstop filter geometry is demonstrated theoretically and experimentally. The filter geometry is particularly suited for stripline and MIC fabrications in that grounding is not required for any part of the filter. Hybrid folded-line geometries allow the filter designer substantial flexibility in choosing a suitable shape factor without significantly effecting the filter's electrical characteristics. The filter geometry is suitable for narrow bandwidth (provided capacitive coupled stubs are used) to wide bandwidth applications.read more
Citations
More filters
Journal ArticleDOI
A compact, high power notch filter with adjustable F/sub 0/ and bandwidth
TL;DR: In this paper, a notch filter is synthesized as a capacitively-coupled short circuited shunt stub design, which is used iteratively to achieve a design with some innovative features.
Dissertation
Compensation technique for nonlinear distortion in RF circuits for multi-standard wireless systems
TL;DR: The compensation method developed to minimize nonlinear distortions in RF circuits caused due to interfering signals is explored thoroughly in this thesis and suggests potential solution to the problem.
References
More filters
Journal ArticleDOI
Hairpin-Line and Hybrid Hairpin-Line/Half-Wave Parallel-Coupled-Line Filters
E.G. Cristal,S. Frankel +1 more
TL;DR: In this paper, a new class of microwave filters, hairpin line and hybrid hairpin-line/half-wave parallel-coupled-line filters, was reported, which is particularly well suited for microstrip and TEM printed-circuit realizations because grounding of the filter resonators is generally not required.
Journal ArticleDOI
Interdigital, Band-Pass Filters
TL;DR: In this article, the design of band-pass filters using interdigital arrays of resonator line elements between parallel ground planes is discussed, and two approximate design procedures are described, both of which permit design directly from lumped element, low-pass, prototype filters.
Journal ArticleDOI
Meander-Line and Hybrid Meander-Line Transformers
TL;DR: In this paper, the application of meander lines to impedance transformers is described, and a comprehensive design table of nearly equal-ripple meander-line transformers of from two to six turns, incorporating a wide range of bandwidths and impedance transformations has been deposited with the ASIS National Auxiliary Publications Service.