Preface to the Second Edition. Preface to the First Edition. 1 Introduction. 2 Network Analysis. 2.1 Network Variables. 2.2 Scattering Parameters. 2.3 Short-Circuit Admittance Parameters. 2.4 Open-Circuit Impedance Parameters. 2.5 ABCD Parameters. 2.6 Transmission-Line Networks. 2.7 Network Connections. 2.8 Network Parameter Conversions. 2.9 Symmetrical Network Analysis. 2.10 Multiport Networks. 2.11 Equivalent and Dual Network. 2.12 Multimode Networks. 3 Basic Concepts and Theories of Filters. 3.1 Transfer Functions. 3.2 Lowpass Prototype Filters and Elements. 3.3 Frequency and Element Transformations. 3.4 Immittance Inverters. 3.5 Richards' Transformation and Kuroda Identities. 3.6 Dissipation and Unloaded Quality Factor. 4 Transmission Lines and Components. 4.1 Microstrip Lines. 4.2 Coupled Lines. 4.3 Discontinuities and Components. 4.4 Other Types of Microstrip Lines. 4.5 Coplanar Waveguide (CPW). 4.6 Slotlines. 5 Lowpass and Bandpass Filters. 5.1 Lowpass Filters. 5.2 Bandpass Filters. 6 Highpass and Bandstop Filters. 6.1 Highpass Filters. 6.2 Bandstop Filters. 7 Coupled-Resonator Circuits. 7.1 General Coupling Matrix for Coupled-Resonator Filters. 7.2 General Theory of Couplings. 7.3 General Formulation for Extracting Coupling Coefficient k. 7.4 Formulation for Extracting External Quality Factor Qe. 7.5 Numerical Examples. 7.6 General Coupling Matrix Including Source and Load. 8 CAD for Low-Cost and High-Volume Production. 8.1 Computer-Aided Design (CAD) Tools. 8.2 Computer-Aided Analysis (CAA). 8.3 Filter Synthesis by Optimization. 8.4 CAD Examples. 9 Advanced RF/Microwave Filters. 9.1 Selective Filters with a Single Pair of Transmission Zeros. 9.2 Cascaded Quadruplet (CQ) Filters. 9.3 Trisection and Cascaded Trisection (CT) Filters. 9.4 Advanced Filters with Transmission-Line Inserted Inverters. 9.5 Linear-Phase Filters. 9.6 Extracted Pole Filters. 9.7 Canonical Filters. 9.8 Multiband Filters. 10 Compact Filters and Filter Miniaturization. 10.1 Miniature Open-Loop and Hairpin Resonator Filters. 10.2 Slow-Wave Resonator Filters. 10.3 Miniature Dual-Mode Resonator Filters. 10.4 Lumped-Element Filters. 10.5 Miniature Filters Using High Dielectric-Constant Substrates. 10.6 Multilayer Filters. 11 Superconducting Filters. 11.1 High-Temperature Superconducting (HTS) Materials. 11.2 HTS Filters for Mobile Communications. 11.3 HTS Filters for Satellite Communications. 11.4 HTS Filters for Radio Astronomy and Radar. 11.5 High-Power HTS Filters. 11.6 Cryogenic Package. 12 Ultra-Wideband (UWB) Filters. 12.1 UWB Filters with Short-Circuited Stubs. 12.2 UWB-Coupled Resonator Filters. 12.3 Quasilumped Element UWB Filters. 12.4 UWB Filters Using Cascaded Miniature High- And Lowpass Filters. 12.5 UWB Filters with Notch Band(s). 13 Tunable and Reconfigurable Filters. 13.1 Tunable Combline Filters. 13.2 Tunable Open-Loop Filters without Via-Hole Grounding. 13.3 Reconfigurable Dual-Mode Bandpass Filters. 13.4 Wideband Filters with Reconfigurable Bandwidth. 13.5 Reconfigurable UWB Filters. 13.6 RF MEMS Reconfigurable Filters. 13.7 Piezoelectric Transducer Tunable Filters. 13.8 Ferroelectric Tunable Filters. Appendix: Useful Constants and Data. A.1 Physical Constants. A.2 Conductivity of Metals at 25 C (298K). A.3 Electical Resistivity rho in 10-8 m of Metals. A.4 Properties of Dielectric Substrates. Index.

Microstrip filters for RF/microwave applications

We review the space-mapping (SM) technique and the SM-based surrogate (modeling) concept and their applications in engineering design optimization. For the first time, we present a mathematical motivation and place SM into the context of classical optimization. The aim of SM is to achieve a satisfactory solution with a minimal number of computationally expensive "fine" model evaluations. SM procedures iteratively update and optimize surrogates based on a fast physically based "coarse" model. Proposed approaches to SM-based optimization include the original algorithm, the Broyden-based aggressive SM algorithm, various trust-region approaches, neural SM, and implicit SM. Parameter extraction is an essential SM subproblem. It is used to align the surrogate (enhanced coarse model) with the fine model. Different approaches to enhance uniqueness are suggested, including the recent gradient parameter-extraction approach. Novel physical illustrations are presented, including the cheese-cutting and wedge-cutting problems. Significant practical applications are reviewed.

https://desi.iteso.mx/erayas/documents/CirOpt_course/Lectures/Space_Mapping/Bandler_04Jan_SM_State_of_the_Art.pdf

Space mapping: the state of the art

A new type of cross-coupled planar microwave filter using coupled microstrip square open-loop resonators is proposed. A method for the rigorous calculation of the coupling coefficients of three basic coupling structures encountered in this type of filter is developed. Simple empirical models are derived for estimation of the coupling coefficients. Experiments are performed to verify the theory. A four-pole elliptic function filter of this type is designed and fabricated. Both the theoretical and experimental performance is presented.

Couplings of microstrip square open-loop resonators for cross-coupled planar microwave filters

Antenna Theory And Design

A transmission line (TL) approach of left-handed (LH) materials is proposed. The transmission characteristics of an ideal LH-TL are presented, the constitutive parameters of an equivalent LH material are derived and shown to be negative, and some LH-transmission paradoxes are explained. Next, a method to design an artificial LH-TL in the form of an ideal lumped-elements ladder network is described and illustrated with simulation results. It is shown that, in this line, left-handedness can be achieved without losses over an unlimited bandwidth, from the cutoff of the resulting high-pass filter to infinity, with excellent agreement with theory. Finally, a microstrip implementation of the LH line for microwaves, using interdigital capacitors and stub inductors, is demonstrated, with moderate insertion loss and a broad bandwidth of the order of 100%.

Transmission line approach of left-handed (LH) materials and microstrip implementation of an artificial LH transmission line

This paper presents the theory and experiment of a new class of microstrip slow-wave open-loop resonator filters. A comprehensive treatment of capacitively loaded transmission line resonator is described, which leads to the invention of microstrip slow-wave open-loop resonator. The utilization of microstrip slow-wave open-loop resonators allows various filter configurations including those of elliptic or quasi-elliptic function response to be realized. The filters are not only compact size due to the slow-wave effect, but also have a wider upper stopband resulting from the dispersion effect. These attractive features make the microstrip slow-wave open-loop resonator filters promising for mobile communications, superconducting and other applications. Two filter designs of this type are described in detail. The experimental results are demonstrated and discussed.

/pdf/theory-and-experiment-of-novel-microstrip-slow-wave-open-1ovkl6ach6.pdf

Theory and experiment of novel microstrip slow-wave open-loop resonator filters

A compact ultra-wideband (UWB) bandpass filter (BPF) with narrow notched (rejection) band in the UWB passband realized on a microstrip line is implemented and presented in this letter for use in wireless communication applications within the unlicensed UWB range set by the Federal Communications Commission (FCC). The filter consists of five short-circuited stubs separated by nonredundant connecting lines in order to exhibit a high selectivity filtering characteristic. The narrow notched (rejection) band was introduced by using a new technique which involves embedding open stubs in the first and last connecting lines in order to reject any undesired existing radio signal which may interfere with the determined UWB passband. The bandwidth of the notched filter can be controlled by adjusting the width of the stubs or the gaps or both. The length of the stubs can be tuned to select a specific frequency for the notched band. The embedded stubs can be used to excite single or double band-reject response. Two UWB BPFs with narrow notched band having a fractional bandwidth (FBW) of about 4.6% and 6.5% were realized theoretically and verified by full-wave EM simulation and the experiment. Excellent agreement between the predicted and measured results was obtained and is demonstrated

Ultra-Wideband (UWB) Bandpass Filter With Embedded Band Notch Structures

In this paper, we report on the results of an investigation into dual-mode operation of microstrip triangular patch resonators and their applications for designing dual-mode bandpass filters. It has been found theoretically that the dual modes can result from the rotation and superposition of a fundamental mode. The characteristics of the dual modes and their mode splitting are described. The applications of this new type of dual-mode microstrip patch resonator in the design of microwave planar filter are presented. A circuit model for operation of this type of filter is proposed. Two- and four-pole filters of this type are demonstrated for the first time. Both theoretical and experimental results are presented.

/pdf/theory-and-experiment-of-dual-mode-microstrip-triangular-3caz7riiij.pdf

Jia-Sheng Hong

Papers

Microstrip filters for RF/microwave applications

Couplings of microstrip square open-loop resonators for cross-coupled planar microwave filters

Theory and experiment of novel microstrip slow-wave open-loop resonator filters

Ultra-Wideband (UWB) Bandpass Filter With Embedded Band Notch Structures

Theory and experiment of dual-mode microstrip triangular patch resonators and filters