Journal ArticleDOI
Formability behavior of Al/steel MIG arc brazed-fusion welded joint
TLDR
In this paper, an Al alloy plate was successfully lap-joined to galvanized steel plate by pulsed metal inert gas (MIG) arc welding with Al-Si filler wire.About:
This article is published in Journal of Materials Processing Technology.The article was published on 2019-11-01. It has received 32 citations till now. The article focuses on the topics: Welding & Arc welding.read more
Citations
More filters
Journal ArticleDOI
In situ SEM study on tensile fractured behavior of Al/steel laser welding-brazing interface
Hongbo Xia,Liqun Li,Caiwang Tan,Jin Yang,Haoyue Li,W.W. Song,Kaifeng Zhang,Qian Wang,Ninshu Ma +8 more
TL;DR: In this paper , microcracks initiated and propagated behaviors in Al/steel interface determined interfacial bonding strength and this was observed by in situ scanning electron microscopy (SEM) technology.
Journal ArticleDOI
Effect of weld reinforcement on tensile and fatigue properties of 5083 aluminum metal inert gas (MIG) welded joint: Experiments and numerical simulations
TL;DR: In this article, the effect of weld reinforcement on tensile, high cycle fatigue and fatigue crack propagation properties of 5083 MIG welded joint through experimentation and numerical simulations was investigated.
Journal ArticleDOI
Influence of shielding gas on microstructure and mechanical properties of laser welded–brazed Al/steel lapped joint
TL;DR: In this paper, a laser welded-brazed Al/steel lapped joint was successfully obtained under various shielding gas contents (pure Ar, CO2+Ar and pure CO2) with laser power of 2000W.
Journal ArticleDOI
Formation of Fe5Si3 precipitate in the Fe2Al5 intermetallic layer of the Al/steel dissimilar arc welding joint: A transmission electron microscopy (TEM) study
TL;DR: In this article, an Al/steel dissimilar joint is generated using the variable polarity cold metal transfer (VP-CMT) technique, and the focused ion beam (FIB) is conducted to extract the testing sample right at the interface, which is subsequently investigated under TEM.
Journal ArticleDOI
Interfacial microstructure and mechanical properties of laser-welded 6061Al/AISI304 dissimilar lap joints via beam oscillation
TL;DR: Oscillating laser welding of 2mm-thick 6061-T6 aluminum alloy and AISI304 steel in overlap configuration was performed under various oscillation amplitudes of 0, 3, and 5 mm as discussed by the authors.
References
More filters
Book
Binary alloy phase diagrams
TL;DR: Binary Alloy Phase Diagrams, Second Edition, Plus Updates, on CD-ROM offers you the same high-quality, reliable data you'll find in the 3-volume print set published by ASM in 1990.
Book
The CRC Materials Science And Engineering Handbook
TL;DR: In this paper, the authors present a comparison of various types of metals, chemical properties, and their application in low-dimensional carons and two-dimensional nanomaterials.
Journal ArticleDOI
Cold metal transfer joining aluminum alloys-to-galvanized mild steel
TL;DR: In this article, the cold metal transfer (CMT) welding-brazing process provides a potential method to join dissimilar metals, and it is feasible to join aluminum alloys-to-galvanized mild steel using CMT.
Journal Article
Joining of aluminum alloy 5052 and low-carbon steel by laser roll welding
M. J. Rathod,M. Kutsuna +1 more
TL;DR: In this paper, low carbon steel and aluminum Alloy 5052 sheets were diffusion welded using different conditions of time, temperature, and pressure in order to understand the kinetics of diffusion and the microstructure of the interface layer.
Journal ArticleDOI
Microstructure characteristics and mechanical property of aluminum alloy/stainless steel lap joints fabricated by MIG welding–brazing process
Hongtao Zhang,Jiakun Liu +1 more
TL;DR: In this paper, the effect of aluminizing coating and galvanized zinc coating on fusion metal spreadability was studied and it was shown that the aluminized coating had limited effect to promote weld surface appearance and obvious micro-cracks were found between the compound layer and the steel side.