Process design for gear shaping of austempered ductile iron (ADI) components
Reads0
Chats0
TLDR
In this paper, an economic process design for the gear shaping of Austempered Ductile Iron (ADI) gears is presented, based on computer-aided force measurements and wear tests.About:
This article is published in Procedia CIRP.The article was published on 2021-01-01 and is currently open access. It has received 0 citations till now. The article focuses on the topics: Gear shaping & Machinability.read more
References
More filters
Journal ArticleDOI
Cutting performance and wear mechanism of alumina-based ceramic tools when machining austempered ductile iron
TL;DR: In this article, the wear rate and wear mechanism of various commercial ceramic cutting tools when machining an austempered ductile iron was investigated, and the effects of oxidation on wear were first investigated by the turning of ADI in an argon or oxygen atmosphere.
Successfully Machining Austempered Ductile Iron (ADI)
TL;DR: In this paper, the material properties and metal matrix of ADI are taken into consideration, and it is shown that ADI can be successfully machined when the properties of the material and the metal matrix are considered.
Journal ArticleDOI
Wear mechanisms of PcBN cutting tools when dry turning ASTM Grade 2 austempered ductile iron under finishing conditions
TL;DR: In this article, the wear mechanisms of PcBN cutting tools were investigated through the examination of the wear surfaces by means of optical, scanning electron and transmission electron microscopes as well as energy dispersive spectroscopy.
Journal ArticleDOI
Ceramic tool wear when machining austempered ductile iron
TL;DR: In this paper, four different types of commercially available ceramic tools were used to turn heat treated SG iron at speeds between 150 and 450 m min −1, and the irons were either hardened by an austempering treatment giving a hardness of ~ 350 Hv, or softened to annealing treatment.
Journal ArticleDOI
Evaluation of the Performance of CBN Tools When Turning Austempered Ductile Iron Material
TL;DR: In this article, the machinability properties of austempered ductile iron using cubic boron nitride cutting tools were evaluated based on the workpiece surface roughness and flank wear.