Does firewood has a faster ignition?
Best insight from top research papers
Firewood ignition can be influenced by various factors. One study found that the ignition of wood samples by firebrands is nonlinear and depends on wind speed, firebrand size, and quantity . Another study investigated the spontaneous ignition of different wood species under static and dynamic heat fluxes. It was observed that increasing heat flux led to ignition after the wood surface cracked, generating more pyrolysis gases . Additionally, the use of an automatic ignition system in firewood-fired stoves can make ignition easier and improve combustion efficiency . However, it is important to note that the specific ignition characteristics of firewood can vary depending on the conditions and experimental setup.
Answers from top 3 papers
More filters
| Papers (3) | Insight |
|---|---|
| The provided paper does not specifically mention firewood or compare its ignition speed to other types of wood. | |
| The provided paper does not specifically mention firewood or compare the ignition speed of different wood types. | |
| The paper does not provide information about the speed of ignition for firewood. The paper discusses an automatic ignition system for firewood-fired stoves, but it does not compare the ignition speed of firewood to other fuels. |
Related Questions
How does flame temperature affect the combustion of wood?5 answersFlame temperature plays a crucial role in the combustion of wood, influencing emissions and ignition characteristics. Higher temperatures can lead to increased concentrations of carbon monoxide (CO) and total organic carbon (TOC) in fire emissions. Additionally, at very high heating rates, like those used in industry, the temperature range of decomposition steps can be affected, impacting ignition temperatures. Moreover, under high-temperature conditions, the distance between wood particles can affect ignition characteristics, with closer proximity leading to shorter ignition delay times. Furthermore, in the combustion of biomass particles, changing the background gas composition can alter combustion intensity, temperatures, and burnout times. Therefore, flame temperature is a critical factor in wood combustion, influencing emissions, ignition, and overall combustion behavior.
What causes combustion of wood to be less efficient?5 answersThe combustion of wood can be less efficient due to various factors highlighted in the provided research contexts. Factors such as uneven wood burning leading to solid residue formation, inadequate distribution of combustion air, and the presence of impurities like soil affecting the combustion process can all contribute to reduced efficiency and increased emissions. Additionally, the chemical composition of ash from phytomass biofuels can result in low ash melting temperatures, causing slagging and sintering issues that further hinder the combustion process. Moreover, the use of recycled wood in combustion can lead to increased corrosion problems in furnace walls due to elevated concentrations of heavy metals and chlorine. Understanding and addressing these factors are crucial in optimizing wood combustion efficiency and reducing emissions in small-scale boilers.
Why firewood burns longer than paper?5 answersFirewood burns longer than paper due to differences in composition and density. Firewood typically contains materials like paraffin, stearin, and wood pellets with low moisture content, allowing for a slower and more sustained burn compared to paper logs made of shredded straw or paper with higher moisture content. Additionally, firewood's higher density and larger volume contribute to a longer burning time as it releases heat more gradually than paper logs, which are typically thinner and less dense. Understanding the pyrolysis and flammability properties of different fuels, such as wildland timbers, can further highlight the factors influencing burn time and fire behavior, aiding in firefighting strategies and fuel management.
What is the charring rate of wood?5 answersThe charring rate of wood refers to the rate at which wood burns and forms a char layer when exposed to fire. It is an important property for assessing the fire resistance and fire integrity of wood materials. Several factors influence the charring rate, including the type of wood, specimen section, duration and temperature of fire, coating material, density, gas permeability, ring width, grain orientation, and heat flux. The charring rate can be measured using various test methods, such as the cone calorimeter, which calculates the char depth based on the mass loss during the test. The charring rate is affected by these factors differently, and understanding their impact is crucial for designing fire-resistant wood structures and predicting their fire performance.
Is firewood a good fuel?5 answersFirewood is a widely used fuel source, particularly in sub-Saharan Africa. It is considered a key component of the cooking energy mix in the region. Wood fuel, including firewood, is renewable and provides about 6% of the global total primary energy supply. However, there are concerns about the negative health and environmental impacts associated with firewood use, such as land degradation and air pollution. Despite these concerns, firewood remains popular due to its availability and affordability, especially in situations of economic difficulties or fossil energy supply shortages. The use of firewood in commercial cooking establishments, such as pizza ovens in Sao Paulo, Brazil, demonstrates that consumer expectations and market pressures can influence energy choices, even when more modern energy options are available. Overall, while firewood is a readily available and traditional fuel source, its sustainability and environmental impact should be carefully considered in the context of broader energy and environmental goals.
Whether burning wood produce more carbon dioxide than fossil fules?4 answersBurning wood can produce more carbon dioxide than fossil fuels, especially when considering slow-growing forests. Studies have shown that the global warming potential (GWP) of biogenic CO2 from slow-growing forests can be significantly higher than the GWP of fossil CO2. Wood burning, specifically during wintertime, has been found to contribute to black carbon (BC) and carbon monoxide (CO) emissions, with wood burning accounting for a significant portion of eBC and CO concentrations in urban areas. Additionally, measurements in Delhi, India, have shown that fossil fuel combustion contributes to a higher percentage of effective black carbon (eBC) compared to wood burning. The contribution of wood burning to BC concentrations has also been observed to vary seasonally, with higher concentrations during winter months. Therefore, it can be concluded that burning wood can indeed produce more carbon dioxide than fossil fuels, depending on various factors such as forest growth rate, location, and season.