scispace - formally typeset
Search or ask a question

How to make home Theatre amplifier? 

Operational transconductance amplifier
Linear amplifier
Direct-coupled amplifier
Fully differential amplifier
Amplifier

Answers from top 9 papers

More filters
Papers (9)Insight
Proceedings Article•DOI
Novel SBS suppression scheme for high-power fiber amplifiers
Anping Liu
09 Feb 2006-Proceedings of SPIE
16 Citations
Furthermore, the nonuniform fiber allows a high power amplifier to be packaged in a much more compact enclosure than an ultra-low NA fiber based amplifier.
Proceedings Article•DOI
Design guidelines for a novel bandpass distributed amplifier
N.P. Mehta, Prasad N. Shastry 
01 Jan 2005
8 Citations
The amplifier topology is suitable for monolithic implementation.
Proceedings Article•DOI
A pipelined SAR ADC reusing the comparator as residue amplifier
Miguel Gandara, Wenjuan Guo, Xiyuan Tang, Long Chen, Yeonam Yoon, Nan Sun 
01 Apr 2017
14 Citations
The proposed amplifier utilizes positive feedback to achieve a large gain at high speed, which can be difficult to achieve with other dynamic amplifier topologies.
Journal Article•DOI
An inexpensive strain gage amplifier and signal conditioner for biological applications
R.A. DiCaprio, J.J. Thomason, J.J. Thomason 
01 Jan 1989-Journal of Biomechanics
6 Citations
The ease of construction and low cost of this amplifier make it ideal for applications requiring a large number of signal channels.
Open access•Journal Article•DOI
Dual-stage Er/Yb doped fiber amplifier for gain and noise figure enhancements
Sulaiman Wadi Harun, Hairul Azhar Abdul-Rashid, S. Z. Muhd-Yassin, Mohd Kamil Abd-Rahman, Mohamad Rom Tamjis, Harith Ahmad 
01 Jan 2006-IEICE Electronics Express
17 Citations
This improvement of gain and noise characteristics is attributed to the efficient pump power distribution within the amplifier and also the addition of a midway optical isolator between the two amplifier stages.
Proceedings Article•DOI
Design of a Low Noise Amplifier of RF communication receiver for mine
Yu-na Su, Geng Li 
24 Jun 2012
8 Citations
The final simulation results show that the Use of ADS for low noise amplifier design is useful and has a good reference value for practical amplifier design.
Proceedings Article•DOI
High-Voltage FET Amplifiers for Satellite and Phased-Array Applications
A. Ezzeddine, H.-L.A. Hung, H.C. Huang 
04 Jun 1985
29 Citations
The high-voltage FET amplifier (HVFA) configuration for power amplifier applications in satellite communications and phased-array systems can offer substantial improvement in DC-to-RF conversion efficiency.
Proceedings Article•DOI
A low power constant-Gm rail-to-rail operational transconductance amplifier by recycling current
Xiao Zhao, Huajun Fang, Jun Xu 
29 Dec 2011
10 Citations
The proposed amplifier has the benefit of delivering the same performance while consuming a fraction of the power compared to the conventional rail-to-rail amplifier.
Proceedings Article•DOI
Design of compact and high-efficiency power supply and power amplifier for parametric array transducer
Jin-Young Kim, Seung-Soo Choi, In-Dong Kim, Wonkyu Moon 
01 Nov 2015
4 Citations
To overcome the above-mentioned disadvantages of the conventional amplifier, this paper proposes a new power amplifier and also its power supply.

Related Questions

How can I make 5.1 amplifier at home?9 answers
How to make DJ amplifier at home?10 answers
How to make a 5.1 channel home theater amplifier at home?9 answers
How to make a amplifier for speakers at home?8 answers
How to make amplifier circuit at home?8 answers
Which is best amplifier or home Theatre?8 answers

See what other people are reading

Is the target ppm value for fishpond 300-400?
4 answers
The target ppm value for a fishpond typically involves monitoring various water quality parameters to ensure optimal conditions for aquatic life. Fishpond monitoring systems integrate sensors like temperature, pH, turbidity, and oxygen content detectors to maintain suitable water quality. These systems enable real-time data acquisition and remote monitoring, allowing for automatic adjustments to balance oxygen levels and ensure water quality. By utilizing microprocessors, cameras, and oxygen generators, these systems help in reducing labor costs and guaranteeing good water quality for fish breeding. Therefore, while the specific ppm range may vary based on the fish species and pond conditions, continuous monitoring and control systems play a crucial role in maintaining the desired water quality levels within the fishpond.Class a class b?
5 answers
Class A and Class B are terms used in various fields, including amplifier design, optical links, psychophysics, and antibiotic resistance detection. In amplifier design, Class-B amplifiers focus on high power output and efficiency, often utilizing resistive and tuned loads for optimal performance. In optical links, a Class-B system demonstrates high linearity and signal power with minimized noise levels, enhancing dynamic range. Psychophysical observations differentiate between Class A, which relates to discriminability of stimuli, and Class B, which pertains to the appearance of stimuli and observer biases, crucial for studying illusions and context effects. Moreover, in antibiotic resistance detection, Class B CPE involves challenging-to-detect resistance mechanisms, where modified testing methods show improved sensitivity and specificity for ESBL detection.What is the AMPPro?
4 answers
The AMPPro, also known as the Amputee Mobility Predictor, is a tool used to assess the mobility and functional ability of lower limb amputees. Research indicates a positive correlation between AMPPro scores and perceived mobility, with higher functional mobility leading to higher perceived mobility. Additionally, age and the cause of amputation were found to influence mobility levels, with traumatic/tumor amputations showing higher AMPPro and perceived mobility scores compared to dysvascular/infection causes. The AMPPro is crucial in evaluating the impact of proposed Medicare policy changes on access to care for lower limb amputees, as it helps project how such changes could affect patients at different levels of functional mobility.Create a checklist on how to test a PNP transistor?
5 answers
To test a PNP transistor, follow this checklist: Bias the transistor to non-linearity using a harmonic-free alternating signal and compare the base and collector currents at higher harmonics to determine the beta value. Establish continuity test circuits to detect short circuits between the base and emitter or emitter and collector, and measure the collector current at a specific base to collector bias with the emitter open. Use an amplifier tuned to the second harmonic of the oscillator frequency and a detector to analyze the collector to base load voltages for beta measurement. Test for base to emitter short circuits by disconnecting the base from the oscillator and connecting it to a resistor while applying negative bias to the emitter. Measure the collector current I CB0 by breaking the emitter circuit and connecting the meter directly to the base.What is TCAD?
5 answers
TCAD, which stands for Technology Computer-Aided Design, is a crucial tool for designing and simulating semiconductor devices. It allows for the creation of models based on current technology nodes, aiding in the analysis of devices like TFET, HEMT, and FINFET. TCAD simulations, conducted using software like Silvaco and Sentaurus, enable researchers to understand semiconductor reliability physics and predict device-level reliability beyond the limitations of SPICE models. Moreover, TCAD simulations can be nonlinear, providing insights into the performance of microwave circuits and active device fabrication technologies. By utilizing TCAD, designers can simulate various parameters like resistivity, strip length, and bulk thickness to optimize the behavior of devices such as AC-coupled LGADs for enhanced spatial resolution.What is the current state of ECG-based active acquisition in the field of EIT?
5 answers
The current state of ECG-based active acquisition in the field of Electrical Impedance Tomography (EIT) involves the development and comparison of various amplifier circuits for ECG recording, including a four-transistor stage band-pass amplifier, a DDA-based fully differential CMOS instrumentation amplifier, and an OTA amplifier using current reuse. Additionally, wearable sensor architectures have been designed to enable synchronous multilead ECG data acquisition alongside frequency-multiplexed EIT measurements, showcasing the feasibility of noninvasive cardiovascular monitoring. Furthermore, advancements in EIT technology have led to the integration of front-end circuits for EEG and EIT acquisition on electrodes, enhancing signal quality and functional integration for brain imaging applications with minimal wiring requirements. These developments highlight the progress and potential for ECG-based active acquisition within the realm of EIT research.What are the most common instruments used to detect sexual incest marriages?
5 answers
The most common instruments used to detect sexual incest marriages involve DNA typing, which is considered the only unbiased approach for identifying incestuous offspring. In the context of evaluating sexual health after spinal cord injury, various instruments have been developed, with seven validated tools specifically for assessing sexuality in individuals with spinal cord injury. Additionally, the application of engineering tools has led to the development of sophisticated devices to measure human sexual response, highlighting the use of instrumentation for quantitative measurement in this field. On a different note, a detection instrument has been designed for detecting short-circuit points in winding conductor assemblies, showcasing the use of specialized equipment for specific detection purposes.How to build a Mosfet amplifier?
5 answers
To build a MOSFET amplifier, one can consider various approaches outlined in the research papers. One method involves utilizing a MOSFET circuit architecture designed to reduce low-frequency flicker noise, enhancing amplification without significant power consumption. Another innovative approach involves a MESFET amplifier tailored for the Internet of Things, featuring self-powered functionality through thermoelectric conversion and energy recycling mechanisms. Additionally, MOSFET amplifiers can be designed for specific voltage gains by understanding the transconductance and bias point interactions, streamlining the design process for achieving desired performance. By incorporating these insights, one can construct MOSFET amplifiers optimized for various applications, ranging from low noise amplification for wireless signalsto self-powered IoT-oriented amplification systems.What is test as a research instrument?
4 answers
A test as a research instrument is a tool used to collect data systematically and objectively. It plays a crucial role in ensuring the validity and reliability of research findings. Tests can vary in complexity, such as the instrument test circuit designed for nanometer sensors, which aims to enhance precision and consistency in dynamic measurements. In the context of educational research, tests are utilized to assess characteristics like content validity, differentiating power, and reliability, as seen in a study on problem-solving mathematics instruments for junior high school students. Furthermore, testing the key research instrument through statistical analysis is essential for confirming its reliability and suitability for the research, as demonstrated in a study focusing on management culture and corporate social responsibility.G clamp dimensions and CAD analysis?
5 answers
G clamp dimensions play a crucial role in ensuring structural integrity and functionality. Finite Element Analysis (FEA) methods are commonly employed to verify the design of clamp structures. These analyses aid in determining appropriate dimensions for the clamp arms under specific loads and assessing the clamp's ability to withstand forces under given conditions. Additionally, CAD analysis software packages like CADVIEW have been developed to assist in evaluating and comparing CAD data for prosthetic and orthotic systems. Furthermore, for pipe clamps used in seismic applications, design rules have been established to optimize dimensions such as thicknesses, widths, and bolt configurations, ensuring adequate stress levels and friction capacity. By integrating FEA methods and CAD analysis tools, designers can efficiently assess and enhance the performance of G clamp structures.How to implement windkessel model with matlab in fluent?
5 answers
To implement the Windkessel model in MATLAB for fluid dynamics simulations, you can utilize a combination of electrical circuit analogies and mathematical modeling techniques. The Windkessel model, traditionally used in cardiovascular studies, can be adapted for fluid dynamics simulations by considering the cerebral Windkessel as a CSF pulsation absorber. By modeling the ABP and ICP pulses using an electrical tank circuit and comparing the dynamics to physiological data from dogs, you can closely simulate the pulse suppression observed in the cranium. This approach allows for a comprehensive understanding of the dynamics underlying pulse suppression and the interaction between arterial blood pressure, intracranial pressure, and CSF dynamics, providing a solid foundation for implementing the Windkessel model in MATLAB for fluid dynamics simulations.