How to measure HF in exhaust gas from blackmass heating?
Best insight from top research papers
To measure HF in exhaust gas from blackmass heating, various methods can be employed. One approach is to use an exhaust gas temperature measuring apparatus that utilizes an air/fuel ratio sensor to accurately measure the exhaust gas temperature without the need for a separate temperature sensor . Another method involves the use of a heating device for a building that includes an exhaust gas measuring opening connected to the exhaust gas line, allowing for the measurement of HF in the exhaust gas . Additionally, a method is described where fuel is added to the exhaust channel from a fuel addition valve, and the heated and ignited fuel helps in heating the exhaust gas, allowing for the measurement of HF . These methods provide different approaches to measure HF in exhaust gas from blackmass heating.
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
| The provided paper does not mention anything about measuring HF in exhaust gas from blackmass heating. | |
| The provided paper does not mention anything about measuring HF in exhaust gas from blackmass heating. | |
| The provided paper does not mention anything about measuring HF in exhaust gas from blackmass heating. The paper is about an exhaust-heating method using fuel addition to heat the exhaust gas. | |
| The provided paper does not mention anything about measuring HF in exhaust gas from blackmass heating. | |
| The provided paper does not mention anything about measuring HF in exhaust gas from blackmass heating. |
Related Questions
How measure the temperature of sun?5 answersTo measure the temperature of the sun, various methods can be employed. One approach involves utilizing a thermometer designed according to the height of the sun, facilitating accurate temperature measurements based on the sun's position. Another method utilizes a temperature measurement apparatus with black and white sensors to calculate the correct ambient temperature regardless of the device's location, ensuring accurate readings through a performance check system. Additionally, sun-tracking microwave radiometry techniques allow for estimating the brightness temperature of the Sun at different frequency bands, providing valuable data on the sun's thermal characteristics. Furthermore, modeling the sun as a blackbody radiator and applying Wein's Law has been attempted, although results may be misleading due to canceling corrections. These diverse approaches offer insights into measuring the sun's temperature accurately.
What is the temperature of the exhaust gas of the hydrogen combustion engine.?4 answersThe temperature of the exhaust gas of a hydrogen combustion engine can be estimated using various methods. One method involves estimating the temperature by calculation using a sensor that measures the temperature of the exhaust gases and a preestablished model. Another method involves determining the exhaust gas temperature by measuring the lambda value of the exhaust gas and calculating a calculated exhaust gas temperature based on this value. Additionally, a method involves measuring the exhaust gas temperature with a temperature sensor and estimating the exhaust gas temperature based on the measured pressure value. Another method involves detecting the temperature of the exhaust gas after passing through an exhaust gas purification treatment device and calculating the temperature of the exhaust gas after passing through a second exhaust gas purification treatment device. Finally, an apparatus estimates the temperature of the exhaust gas based on the temperature increment caused by adiabatic compression and the amount of heat lost in the exhaust gas.
How to quantitively measure hydrogen fluoride in gas when burning li ion batteries?5 answersQuantitatively measuring hydrogen fluoride (HF) in gas when burning lithium-ion (Li-ion) batteries can be done using different methods. Larsson et al. conducted experiments to measure HF emissions during battery fires and found that large amounts of HF can be generated, ranging between 20 and 200 mg/Wh of nominal battery energy capacity. They also measured HF emissions when exposing Li-ion battery cells to an external propane burner fire and found that the released HF emissions ranged between 12-81 mg/Wh. These measurements were validated using two independent techniques, including gas-washing bottles and online FTIR measurements. Additionally, Kikuchi and Tokunaga developed a method for quantitatively determining the water content in a hydrogen fluoride-containing compound, which could be useful for analyzing HF in Li-ion batteries. Overall, these studies provide insights into the quantitative measurement of HF emissions during Li-ion battery fires and the water content in HF-containing compounds.
What is the best method for measuring hydrogen gas flow rate?4 answersThe best method for measuring hydrogen gas flow rate is the ultrasonic-electrical dual-modality method proposed by Cui et al.. This method involves measuring the gas flow using an ultrasonic sensor and then correcting the measurement results by measuring the cross-section gas holdup using a capacitance sensor. The average relative error of the gas velocity measurement using this method is 4.71%, which allows for accurate measurement of wet gas flow under typical flow patterns. Another method mentioned is the method proposed by Xingwang et al., which involves collecting pressure, temperature, or humidity data at the input and output ends of the flow control device and using a lookup or calculation method to acquire the instantaneous hydrogen flow. Both methods have advantages in terms of measurement accuracy and do not require special hydrogen flow measurement devices.
What are the measurement methodologies for MRV emission?3 answersMeasurement methodologies for MRV emissions include collecting data over time through field measurements, observations, remote sensing, and interviews. In the case of the Thailand Voluntary Emission Trading System (Thailand V-ETS), a bottom-up perspective was used to gather data through interviews, meetings, audits, desktop research, and consultations with stakeholders. The MRV guidelines developed for the Thailand V-ETS focused on the high-intensive energy industry, specifically the petrochemical industry, and required factories to report their GHG emissions effectively, consistently, reliably, and compatibly. In the gas distribution sector in Iran, an MRV document was prepared to manage carbon emissions, with a focus on monitoring consumers' equipment and applying mitigation actions. The IPMVP protocol was used to validate the data in this case study. Overall, measurement methodologies for MRV emissions involve collecting data, validating it, and reporting the results according to established standards and guidelines.
How to read transistor HFE?7 answers