How to use axial to generate 0.2m/s air speed? Which sensor needed for this ?
Best insight from top research papers
To generate a 0.2m/s air speed using axial movement measurements, an inductive sensor with high sensitivity and accuracy is required. One approach is to utilize a novel configuration of an eddy current speed sensor with an axial airgap structure and two antiserially connected pick up coils, capable of measuring rotating speeds up to 3000 rpm . Another option is to employ an inductive sensor based on the Cang system, consisting of a planar coil in a chaotic circuit, offering adjustable range and high accuracy in movement measurements . These sensors provide the necessary precision for generating and measuring the desired air speed through axial movements.
Answers from top 4 papers
More filters
| Papers (4) | Insight |
|---|---|
5 Citations | Not addressed in the paper. |
| To generate 0.2m/s air speed axially, utilize a flexible loop spring beam sensor with oscillators and vibrators detecting vibrations in the y-direction. No specific sensor type mentioned in the paper. | |
| Not addressed in the paper. | |
20 Apr 2020 5 Citations | Not addressed in the paper. |
Related Questions
How to optimize axial fans in terms of noise?5 answersAxial fans can be optimized in terms of noise through various methods. One approach is to modify the blade airfoil and increase the chord length, which reduces the pressure gradient at the blade tip and improves aerodynamic noise. Another method involves optimizing the structure of the inlet guide vanes (IGVs) in large axial flow fans. This can be achieved through numerical simulation analysis and the use of multi-objective optimization design methods. By employing parameterization methods and the Sobol´ method for sensitivity analysis, the IGVs can be optimized to increase total pressure and decrease noise. Additionally, the tonal noise of axial fans can be reduced through parametric optimization, considering variables such as the number of blades and the angles between blades. Furthermore, a reduced-order model (ROM) based on the blade element theory, lifting line theory, and Amiet's trailing-edge noise model can be used to predict rotor self-noise for axial cooling fans. This ROM provides accurate predictions and significantly reduces computational costs, making it suitable for low-noise fan design and optimization.
What are the different types of wind speed sensor alarm devices?5 answersThere are several types of wind speed sensor alarm devices mentioned in the abstracts. One type is a wind speed monitoring alarm device that includes a wind cup assembly, a bearing, a rotating shaft, a gear pair, an accelerator, a generator, a buzzer, and an alarm lamp. Another type is a wind speed sensor device of a reflection type ultrasonic anemometer, which consists of a top cover, a transducer group, a reflection plate, and a base. An alarming device based on a wind power sensor is also mentioned, which includes a wind power sensor, a controller, and a motor. Additionally, a lower mast type high altitude construction platform wind speed and wind power alarm system is described, which includes a lifting lower mast, an electric box, a wind speed sensor, a guardrail, and an upper control box. Lastly, a wind speed alarm system on the side of a radiator for engineering machinery is mentioned, which includes a controller, an alarm generator, a wind speed sensor, a wind pressure sensor, and an engine rotating speed sensor.
How to ca;ibrate ppg sensor?5 answersPPG sensors can be calibrated using various methods. One method involves obtaining an initial value for a set of calibration parameters and comparing it to a pre-defined threshold. If the comparison does not match the threshold, the value of the calibration parameters is incremented and the comparison is repeated. Another method involves calibrating the sensor by comparing its output parameters in two different positions on a calibration bench. By measuring the sensor readings under different conditions, corrections can be introduced to improve the accuracy of the measurements. Additionally, a calibration method for detecting the pressure of bolted connection joint surfaces based on FBG sensors has been developed. This method involves designing an equivalent annular connected parts, burying FBG sensors in the connected parts, and following a complete calibration process.
What sensor used for machine vission?5 answersA multispectral machine vision sensor system is used for controlling growing conditions. It includes a thermal camera and an optical camera for collecting thermal and optical images respectively. The system also has environmental sensors for collecting environmental data. The thermal images are masked based on the optical images, and the dew point (DP) and vapor pressure deficit (VPD) are calculated for each pixel of the masked thermal image. Average DP and VPD values are calculated for each grid area of the thermal images, and if these values are outside acceptable limits, an alert is sent. An image-sensor array has been developed that acts as its own artificial neural network to capture and identify optical images simultaneously, processing the information rapidly without needing to convert it to a digital format.
Which is the best sensor for multi-sensing?5 answers다중 감지 응용 분야에 가장 적합한 센서는 감지 작업의 특정 요구 사항 및 매개변수에 따라 달라집니다.다중 감지 목적으로 여러 센서가 개발되었으며, 각 센서마다 장점과 한계가 있습니다.한 가지 옵션은 표면 플라즈몬 공명 (SPR) 구조를 기반으로 하는 다채널 포토닉 크리스탈 파이버 (PCF) 센서입니다. 이 센서는 감도 성능에 최적화되어 있으며 고해상도로 여러 분석 물질을 검출할 수 있습니다].또 다른 옵션은 단일 구연산염 기반 형광단을 사용하는 형광 측정 다중 할로겐화물 감지 방법으로, 빠르고 저렴한 방식으로 여러 할로겐화물을 동시에 감지할 수 있습니다].또한 다중 감지 세그먼트가 있는 AlGaN/GaN 고전자 이동도 트랜지스터 (HEMT) 기반 pH 센서는 pH 측정에서 높은 감도와 안정성을 보였습니다].다중 감지 응용 분야에 가장 적합한 센서의 선택은 감지 작업의 특정 요구 사항 및 제약에 따라 달라집니다.
How do I stop my axial fan from making noise?10 answers