Is caron fibre/epoxy or e-glass/epoxy better for mono layer leaf spring?
Best insight from top research papers
Carbon fiber/epoxy is better than E-glass/epoxy for a mono layer leaf spring . The optimization results show that carbon fiber composite leaf springs are 91.92% lighter than multi-leaf springs, making them the most suitable candidate for weight reduction . Additionally, experimental results indicate that carbon/epoxy leaf springs have the longest average usage life with approximately 89% weight reduction, while E-glass/epoxy leaf springs satisfy the minimum usage life requirements with higher load carrying capacity and 82% weight reduction . Therefore, carbon fiber/epoxy is a better choice for a mono layer leaf spring due to its lightweight and longer usage life compared to E-glass/epoxy .
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
1 Citations | The paper does not mention carbon fiber/epoxy or e-glass/epoxy for mono layer leaf spring. The paper is about the fabrication and testing of a glass/banana hybridized epoxy mono composite leaf spring. |
| The provided paper does not mention whether carbon fiber/epoxy or e-glass/epoxy is better for a mono layer leaf spring. | |
| The answer to the query is not provided in the paper. The paper discusses the analysis of composite leaf springs using different composite materials, but it does not compare carbon/epoxy and E glass/epoxy specifically for mono layer leaf springs. | |
01 Jan 2022 1 Citations | The paper does not directly compare carbon fiber/epoxy and e-glass/epoxy for mono layer leaf springs. The paper only mentions that carbon fiber composite is the most suitable candidate compared to glass and graphite fiber composites. |
4 Citations | The paper does not directly compare carbon/epoxy and E-glass/epoxy for mono layer leaf springs. The paper focuses on comparing different types of fiber reinforced composite leaf springs and their performance. |
Related Questions
What is the economic significance of wood-based panels?5 answersWood-based panels have significant economic significance. The enhanced technological possibilities for utilizing wood waste and residues in the production of wood-based panels can contribute to the transition to a circular, low-carbon bioeconomy. Wooden structures in housing have shown potential for decreasing greenhouse gas emissions, and the economic feasibility of wood-based structures has been demonstrated in the Helsinki metropolitan region. Timber framed systems have been found to have a significant benefit in terms of embodied carbon compared to masonry residential structures. However, the wood-based panels sector in the UNECE experienced a decline in 2020, mainly due to the impact of the COVID-19 pandemic on the region's economies. In North America, the wood-based panels industry has seen positive growth, while in Europe, the debt crisis has affected the economy but not the panel markets.
What is the percentage usage of resin in fiber glass?5 answersThe percentage usage of resin in fiber glass varies across the different papers. Shao Huanyu's paper mentions a range of 5%-15% of epoxy resin in the composite material. Sekikawa Munehisa, Sasaki Haruka, and Takaizumi Mao's paper does not provide a specific percentage, but states that the glass fiber-reinforced resin molding contains a glass fiber of 10-90 mass% relative to the total amount of the molding, and a resin of 90-10 mass%. Tsuchikane Akane, Onodera Yuya, Takahashi Yuta, Kurita Tadashi, and Aizawa Koji's paper also does not provide a specific percentage, but mentions that the glass fiber-reinforced resin molding contains a glass fiber in an amount ranging from 10 to 90 mass% and a resin in an amount ranging from 90 to 10 mass%. Dai Sakuma, Noriyoshi Sato, and Toshihiro Tashiro's paper does not provide a specific percentage either, but states that the glass fiber fabric-resin composition laminate has a glass composition of 57 to 70 mass% of SiO2, 18 to 30 mass% of Al2O3, 5 to 15 mass% of MgO, and other components. Ota Mitsugi's paper mentions a mixed resin component of 30-70 mass% in the glass fiber-reinforced resin composition.
How can Fabrican fibers be used to improve the performance of products?5 answersFabrican fibers can be used to improve the performance of products by enhancing their mechanical properties, dimensional stability, and thermal degradation resistance. These high-performance fibers have a wide range of applications, including fiber reinforcement, cords, ropes, performance fabrics, electronic packaging, sports equipment, and fiber optics. However, the current mechanical properties of these fibers are still lower than their theoretical values, creating a gap for improvement. Additionally, the production costs of these fibers need to be reduced, and there is a need for different fiber chemistries to withstand various end-use conditions. Electrospun nanofiber materials, such as Fabrican fibers, offer unique benefits like high dynamic bending elasticity, stretchability, and high mechanical strength. These fibers have been extensively used in fields like environmental management, safety protection, and tissue engineering due to their large specific surface area, small pore size, high porosity, good channel connectivity, and ease of functional modification.
What are the materials needed for epoxy resin based flax hemp fabric based composite?5 answersThe materials needed for an epoxy resin-based flax hemp fabric composite include flax and hemp fibers as the reinforcing materials, and epoxy resin as the matrix material. The composites can also be reinforced with natural resin and acrylic acid/glycerol-based natural resin. The fabrication process involves blending the raw materials according to a specific formula, layering the mixture between multiple layers of flax fiber fabrics, and curing the composite at specific temperatures and durations. The mechanical properties of the composite can be improved by controlling the mixing ratio of the rosin resin to the epoxy resin. The resulting composite materials have shown promising results in terms of tensile, flexural, and impact properties.
How can we use leaves as a construction material?5 answersLeaves can be used as a construction material by processing them into thin plates and bonding them together. The thin plates can be arranged in parallel to form core plates and face plates, which are then superposed and bonded with a water-resistant adhesive. A coating for surface hardening and waterproofness can be applied to enhance the durability of the construction material. This method allows for the utilization of thinnings, such as deciduous pine, which are abundant in mountain forests but have been difficult to utilize. By using leaves as a construction material, the problem of disposal of thinnings can be addressed, and a sustainable approach to construction can be achieved.
What are the different types of epoxy resin?4 answersEpoxy resins are organic polymer compounds that contain two or more epoxy groups. These epoxy groups can be located at the end or middle of the molecular chain or in a ring structure. There is a wide range of epoxy resins, with the nonepoxy part of the molecule being aliphatic, cycloaliphatic, highly aromatic hydrocarbon, or non-hydrocarbon and possibly polar. Some common types of epoxy resins include bisphenol A type epoxy resins, diglycidyl ether bisphenol A type epoxy resins, phenol-novolac type epoxy resins, and cresol-novolac type epoxy resins. These epoxy resins can be used in various applications such as adhesives, coatings, melting plastics, casting plastics, and fiber-reinforced resin matrix composite materials.