Search or ask a question

Warehouse sustainable operation related theories?

Systems architecture

Performance indicator

Best insight from top research papers

Warehouse sustainable operation theories focus on optimizing resource utilization and performance monitoring. Implementing efficient storage location assignment policies can significantly reduce operational costs and improve warehouse performance. Furthermore, utilizing simulation software for warehouse optimization can enhance order fulfillment productivity without the need for space expansion. Sustainable development principles are crucial in warehouse systems to ensure the efficient use of natural and human resources. By incorporating modular system architectures, decentralized control structures, and performance monitoring methods, warehouses can identify areas for improvement and enhance sustainability. These theories emphasize the importance of continuous monitoring, optimization, and adaptation to achieve sustainable warehouse operations.

Answers from top 5 papers

PDF

Open Access

More filters

Papers (5)	Insight
Open access•Journal Article Theories of Sustainable Development Yves Laberge 01 Jan 2015-Electronic Green Journal 12 Citations	Not addressed in the paper.
Open access Warehouse operation optimization-simulation model H Pham, D Nguyen, C Doan, Q Thai, N Nguyen - Show less +4 more 01 Jan 2019	Not addressed in the paper.
Open access On sustainable operation of warehouse order picking systems Ricky Andriansyah, Lfp Pascal Etman, Jacobus E. Rooda - Show less +2 more 01 Jan 2009 3 Citations	The paper proposes a modular system architecture and performance monitoring method for sustainable warehouse operation, focusing on resource efficiency and continuous improvement in system configuration.
Book Chapter•DOI Sustainable Manufacturing-Related Aspects in Turning Operation: A Review Based Study Ravi Pratap Singh, Ravinder Kataria, Amit Kumar Tiwari - Show less +2 more 01 Jan 2020 2 Citations	Not addressed in the paper.
Book Chapter•DOI Minimizing Warehouse Operation Cost Tracy Adeline Ajol, Shirley Sinatra Gran, Awang Nasrizal Awang Ali - Show less +2 more 01 Jan 2018 1 Citations	Not addressed in the paper.

My columns

Related Questions

Sustainability in inventory management?5 answersSustainability in inventory management involves integrating environmental considerations into decision-making processes to reduce carbon emissions and enhance profitability. Various models like Economic Order Quantity (EOQ) and Sustainable Order Quantity (SOQ) have been developed to optimize inventory levels while minimizing environmental impacts and total costs. These models consider factors like energy efficiency, carbon emissions, and social-environmental costs to determine the optimal order quantity, reorder levels, safety stock, and transport means. By incorporating sustainability criteria into inventory management, businesses can improve the resilience of their supply chain models, reduce greenhouse gas emissions, and make market-specific decisions that benefit both the environment and profitability.

How to measure the sustainability in a warehouse? whether the warehouse is sustainable or not? what are the scores?5 answersTo measure the sustainability of a warehouse, various methodologies and tools can be employed. One approach involves integrating Supply Chain Operation Reference (SCOR) and Analytical Hierarchy Process (AHP) to evaluate warehouse performance based on green warehousing criteria. Additionally, a structured model has been proposed to quantify consumptions and greenhouse gas emissions in logistics facilities, offering Environmental Performance Indicators (EPIs) for assessing environmental impact and supporting decision-making processes. In the Indian context, the warehousing sector is seeing a rise in green initiatives to reduce emissions and enhance sustainability, with warehouses being significant sources of greenhouse gases. Evaluating warehouse performance can be done using tools like COPRAS and TOPSIS, considering criteria such as operational errors, customer complaints, and staff productivity.

What theories have been used to study sustainable fashion consumption?5 answersTheories used to study sustainable fashion consumption include Bourdieu's Field Theory, planned behavior theory, and the triple bottom line framework. Bourdieu's Field Theory is applied to examine the influence of fashion retail workers on industry sustainability and their role as actors in the fashion industry. Planned behavior theory contrasts extant theories and explores how millennials' sustainability values translate into action in fashion consumption, highlighting the role of trust in intermediaries such as celebrity influencers. The triple bottom line framework is used to analyze the sustainable presentation of fashion rental company platforms, focusing on the social, environmental, and economic impacts of their practices. These theories provide insights into the motivations, behaviors, and strategies related to sustainable fashion consumption.

How environmental commitment affect green sustainable warehouse performance?4 answersEnvironmental commitment positively affects green sustainable warehouse performance by integrating economic, environmental, and social aspects of warehouse operations. Sustainable green warehouse practices, such as green buildings, renewable energy usage, and ISO standards, contribute to minimizing environmental impact while maintaining economic efficiency. Additionally, the implementation of Green Supply Chain Management (GSCM) practices, including green purchasing and internal environmental management, has a significant positive impact on the environmental, economic, and social performance of warehouses. Furthermore, the consideration of environmental objectives in warehouse design and management leads to reduced carbon dioxide emissions and increased space utilization, demonstrating the potential benefits of environmental commitment in warehouse operations.

How can sustainable supply chain management be achieved?3 answersStep 1: Answer without citation Sustainable supply chain management (SSCM) can be achieved by incorporating sustainable practices, utilizing digital technologies, and measuring performance effectively. It involves addressing economic, environmental, and social aspects at every stage of the supply chain, while also considering the risks associated with environmental and social factors. Strategies such as technology adoption, risk assessment, and eco-friendly production systems play a crucial role in achieving sustainability in supply chain management. Step 3: Answer with citation Sustainable supply chain management (SSCM) can be achieved by incorporating sustainable practices, utilizing digital technologies, and measuring performance effectively, as highlighted by ###Lu Xu et al.### and ###Anupriya Surinder Kumar et al.###. It involves addressing economic, environmental, and social aspects at every stage of the supply chain, while also considering the risks associated with environmental and social factors, as emphasized by ###Emel Yontar and Şölen Zengi̇n###. Strategies such as technology adoption, risk assessment, and eco-friendly production systems play a crucial role in achieving sustainability in supply chain management, as discussed by ###Bikash Dey et al.###.

What is the theory of sustainable leadership?2 answersSustainable leadership is a theory that emphasizes the need for leadership to address social and environmental challenges and promote sustainable development. It is based on the understanding that organizations must adopt a balanced stakeholder approach and consider the triple bottom line of economic, social, and environmental factors. Sustainable leadership involves a humanistic approach that takes into account the well-being of individuals within the organization and creates a self-reinforcing leadership system that enhances organizational performance and longevity. It also recognizes the importance of disruptive change and system disruption in creating new patterns of equilibrium and advancing towards a more sustainable future. The theory of sustainable leadership highlights the competencies and practices required for leaders to effectively navigate the complexities of sustainability, including strategic thinking, cognitive diversity, learning agility, systems thinking, intuitive decision making, and societal values. Additionally, sustainable leadership incorporates spirituality, self-transcendence, interconnectedness, and a global mindset for sustainability, which includes remote moral responsibility and care and compassion. Sustainable leadership serves as a counter-hegemonic, inclusive, and place-centered approach that aims to create reciprocal and nurturing relationships among people and between humans and nature.

See what other people are reading

Are there ranges of coefficient of variation considered normal for sewage monitoring variables?

The coefficient of variation (CV) values considered normal for sewage monitoring variables vary based on the specific parameters being measured. In wastewater sampling, CVs of 8.5% for chemical oxygen demand (COD), 9.5% for total suspended solids (TSS), and 14.5% for sulfate ion were reported. Additionally, the distribution of monitoring data in sewage effluents was analyzed, showing that the lognormal assumption is generally justified for trace contaminants in effluents, especially in spatial cases across different treatment works. These findings highlight the importance of understanding the variability and statistical distribution of monitoring data to ensure the reliability and accuracy of environmental models in sewage monitoring programs.How does the implementation of demand side management strategies impact energy consumption patterns in Malaysia?

The implementation of demand side management (DSM) strategies in Malaysia significantly impacts energy consumption patterns by optimizing energy usage, reducing costs, and enhancing efficiency across various sectors. In commercial buildings, for instance, the replacement of fluorescent lamps with LED lamps, particularly in locations operating 24 hours, has demonstrated a potential energy saving of up to 50%, thereby reducing electricity consumption and bills substantially. This aligns with broader efforts within the industrial sector, where the application of Particle Swarm Optimization (PSO) and Time Series Forecasting (TS-F) under the Enhanced Time of Use (ETOU) tariff scheme has optimized demand profiles, leading to reduced electrical energy costs across all price zones. Moreover, the importance of DSM in forecasting electricity demand is underscored by studies employing system dynamics approaches, which consider variables like Home Energy Reports (HER) and Minimum Energy Performance Standards (MEPS) to evaluate future power generation capacity needs. The Peninsular Malaysia electricity market reform towards Incentive Based Regulation (IBR) and the implementation of ETOU tariffs have also highlighted the effectiveness of DSM strategies in managing load and reducing electricity bills for commercial and industrial consumers. Advanced Metering Infrastructure (AMI) usage introduces new Energy Key Performance Indicators (KPIs), enabling the planning of differentiated DSM strategies that can lead to variable overall energy savings between 5 and 40%. Additionally, the reshaping of load profiles through modified genetic algorithms and hybrid optimization methods for unit commitment (UC) further emphasizes DSM's role in achieving cost and emission reductions. Collaborative approaches, such as the Collaborative Virtual Power Plant Ecosystem, leverage community sharing platforms to change energy use behaviors, demonstrating that collaboration can significantly influence consumption patterns and community sustainability. Lastly, DSM measures focusing on optimal utilization of electricity during peak and off-peak hours have been shown to improve load curves and load factors, offering substantial energy bill savings by reducing maximum demand charges during peak hours. Collectively, these strategies and implementations underscore the transformative impact of DSM on Malaysia's energy consumption patterns, driving the nation towards more sustainable and efficient energy use.What is the definition and purpose of jigs and fixtures?

Jigs and fixtures are essential tools in manufacturing processes. Jigs are devices that guide cutting tools, while fixtures hold workpieces in place during machining operations. Their primary purpose is to enhance productivity, accuracy, and repeatability in manufacturing. Jigs and fixtures ensure precise part duplication, maintain product quality, and streamline production processes for mass manufacturing. These tools help in achieving uniformity in product shape and size, reduce setup time, and minimize errors during machining. Additionally, they aid in securing workpieces for support, leading to increased precision, reliability, and interchangeability in finished parts. Teaching jigs and fixtures design is also integral in manufacturing education, where students learn to create specific jig designs to hold workpieces efficiently.How does the Balanced Scorecard framework influence the evaluation of public policies?

The Balanced Scorecard (BSC) framework significantly impacts the evaluation of public policies by providing a comprehensive approach to performance assessment. It allows for the consideration of various perspectives such as financial, customer, internal processes, and learning and growth, enabling a holistic evaluation of policy effectiveness. Implementing the BSC in public services emphasizes the importance of focusing on indicators that assess the satisfaction of beneficiaries and employees, as well as the efficiency of procedures and processes. The BSC aids in clarifying organizational objectives, aligning employees with long-term strategies, and enhancing administrative control over procedures, ultimately leading to improved effectiveness and adaptability in a changing environment. Overall, the BSC serves as a valuable tool in enhancing the evaluation and management of public policies by providing a structured and multi-dimensional approach to performance assessment.What are the best practices of qualitative performance assessment measures to support institutional policy in organization?

Qualitative methods are crucial for understanding the context and reasons behind patterns in institutional assessment. They are particularly effective when combined with quantitative methods, offering valuable insights into essential assessment questions. Additionally, developing a quantitative model for measuring administrative performance in public organizations is vital for enhancing policy implementation and institutional capacity building. A mixed-method study on tertiary assessment policy and practice emphasizes the importance of aligning institutional policies with international research findings to ensure manageable, valid, and equitable assessment practices. Current performance measurement methods are critiqued for their inability to measure policy effectiveness accurately, often resulting in rankings that do not fully capture the impact of policies. Integrating qualitative measures into institutional policy can enhance the overall effectiveness and integrity of organizational assessments.What are Key Performance Indicators (KPIs)?

Key Performance Indicators (KPIs) are quantifiable measures used to evaluate the performance of a business activity or area, providing insights into various important aspects such as financial results, sales, marketing, manufacturing, and customer satisfaction. KPIs help organizations track progress, set goals, and identify emerging issues for timely corrective actions. They can take the form of absolute numbers, relative data, ratios, rankings, or ratings, depending on the sector and nature of the activity. KPIs play a crucial role in project management across different industries, aiding in improving performance and keeping strategies on track. Additionally, the quality of internal audit work is assessed using various aspects, reflecting stakeholders' perspectives and the organization's economic activity.What is the definition of academic performance?

Academic performance is a multidimensional construct that encompasses a student's learning achievement and progress. It is defined as a set of grades reflecting a student's educational advancement, influenced by various factors such as biological, psychological, economic, and sociological aspects. Academic performance evaluation aims to predict future learning outcomes based on historical student behavior data, considering factors like home education background. The concept of academic performance has evolved over time, moving beyond just financial indicators to include non-financial aspects essential for educational institutions' proper functioning. Academic performance is crucial in assessing students' progress, with methodologies, evaluations, and teacher roles directly impacting it.How are digital twins for machine tools different than digital twins in other fields?

Digital twins for machine tools differ from those in other fields due to their specific applications and functionalities. In the realm of machine tools, digital twins are developed to simulate and control machining processes, ensuring optimal results by considering the dynamic behavior of the machine tool, workpiece, and process settings. These digital twins enable real-time monitoring and adjustment of the machining system, enhancing process planning and control. On the other hand, digital twins in mechatronic machines focus on simulating complex systems like dual-servo gantry-type machine tools, facilitating real-time data communication and bi-directionality between virtual and real systems. Additionally, digital twins for machine tools involve creating precise dynamic models to predict machined surface quality, incorporating interaction force, vibration, and friction models.What are the current methods for carbon accounting in the production and disposal of materials?

Current methods for carbon accounting in the production and disposal of materials encompass various approaches. One method involves utilizing multilevel material flow analysis (MFA) to establish a robust carbon accounting system that considers material stocks, flows, and emissions within industrial plants. Additionally, environmental product declarations (EPDs) are employed to communicate the carbon footprint of construction materials, emphasizing the need to report biogenic carbon contributions accurately. Another approach involves implementing material flow cost accounting (MFCA) to integrate economic and ecological targets by enhancing material and energy efficiency in manufacturing processes. Furthermore, a simplified carbon emissions accounting method for industrial parks focuses on energy consumption, waste treatment, and production processes to guide low-carbon development strategies. These methods collectively aim to enhance transparency, efficiency, and sustainability in carbon accounting practices related to material production and disposal.What is Friction Stir Additive Manufacturing?

Friction Stir Additive Manufacturing (FSAM) is a solid-state additive manufacturing technique that utilizes the friction stir welding concept to produce multi-layered components through plate addition fashion. FSAM offers advantages such as equiaxed grain structure in the produced parts, leading to enhanced mechanical properties with reduced residual stresses and solidification defects compared to melting-based additive manufacturing methods. It involves continuous feeding of wire materials or powder bed deposition using friction stir technology to create large metallic structures efficiently. FSAM has been explored in various forms like wire-based FSAM (W-FSAM) and powder bed FSAM (PBFS), showcasing potential for fabricating components with high efficiency and performance. Additionally, hybrid additive manufacturing systems incorporating FSAM with subtractive processes have been developed for fabricating complex geometries with precision.What are some common examples of maket designs used in various industries?

Various industries utilize different market designs to optimize their operations. For instance, the automobile industry employs a make-or-buy approach to allocate work efficiently, minimizing adjustment costs within and between firms. Industrial design, focusing on aesthetics and functionality, plays a crucial role in creating products across industries, protecting new designs and granting rights to designers. In manufacturing, Design for Manufacturing (DFM) strategies are crucial for achieving high-quality production with minimal costs and technical challenges, often utilizing computer numerical control (CNC) machining systems for precision and automation. The semiconductor industry emphasizes Design for Manufacture (DFM) to enhance design capabilities and align product design with manufacturing processes, aiming to sustain productivity growth amidst increasing complexity. Overall, market designs like make-or-buy strategies, industrial design protection, DFM principles, and CNC machining systems are common examples utilized across various industries to streamline operations and enhance competitiveness.