What concentrations of organic carbon are used for polyhydroxyalkanoate production?
Best insight from top research papers
Polyhydroxyalkanoate (PHA) production utilizes various concentrations of organic carbon sources. Singh and Shrivastava found that the bacterium Pseudomonas pseudoflava produced the most PHA at a concentration of 19 g/l . Jimoh determined that an optimal PHA production was achieved at 8% substrate concentration . Tyagi and Sharma used different concentrations of untreated crude paper industry effluent (PIE) and achieved maximum PHA production at 30% PIE . Amini et al. used a maltose concentration of 40 g/l to produce PHB from beer brewery wastewater . Heepkaew and Suwannasilp investigated PHA production in two-stage continuous stirred tank reactor (CSTR) systems and found that PHA accumulation was achieved with influent glycerol concentrations of 3000 mg COD/L . Therefore, the concentrations of organic carbon used for PHA production vary depending on the specific study and carbon source employed.
Answers from top 4 papers
More filters
| Papers (4) | Insight |
|---|---|
| The paper mentions that the systems were fed with influent glycerol concentrations of 3000 mg COD/L for polyhydroxyalkanoate production. | |
| The paper mentions that maltose, an organic carbon source, was used for polyhydroxyalkanoate production. The optimum maltose concentration for biopolymer production was 40 g/L. | |
| The paper states that an optimal PHA production was achieved at 8% substrate concentration, indicating that 8% organic carbon concentration was used for polyhydroxyalkanoate production. | |
| The concentrations of organic carbon used for polyhydroxyalkanoate production in this study ranged from 4 g/l to 55 g/l. |
Related Questions
What is the optimal quantity of organic matter in anaerobic digestion?4 answersThe optimal quantity of organic matter in anaerobic digestion depends on the specific mixture of substrates used. Research has shown that a higher mixing ratio of food waste can result in a higher methane yield, leading to improved biodegradability and volatile solids removal rate. Mathematical models have been developed to optimize the anaerobic co-digestion process, considering factors like carbon, nitrogen, lipid, and lignin content in organic wastes. For instance, in a study focusing on different fractions of organic wastes, the optimal mixtures were determined to maximize biogas production, with specific percentages of various waste components identified for higher yields. Additionally, the feasibility of using simultaneous mass balances of different nutrients has been evaluated to optimize feeding composition in anaerobic digestion, showcasing the importance of balancing nutrient ratios for efficient organic matter degradation.
What are organic acids produced from PAHs biodegradation?4 answersOrganic acids produced from PAHs biodegradation include low molecular weight organic acids (LMWOAs). Additionally, during the degradation process of PAHs, phthalic acid was found in the metabolites. These organic acids play a crucial role in enhancing the microbial degradation of PAHs and influencing the physicochemical behavior of PAHs in the extracellular environment, interactions between PAHs and microbial cell surfaces, and intracellular metabolization of PAHs. Furthermore, the metabolic pathway for PAHs degradation involves the production of phenol, 2,5-bis(1,1-dimethylethyl), which is a new type of PAH metabolite. Overall, the production of various organic acids during PAHs biodegradation highlights the complex biochemical processes involved in the remediation of PAH-contaminated sites.
What is PHA(Polyhydroxyalkanoates)?5 answersPolyhydroxyalkanoates (PHA) are biodegradable plastics that can be produced by various bacteria. They are considered as a promising alternative to traditional plastics due to their biodegradability, biocompatibility, and thermoplasticity. PHA can be synthesized by microbes under stress conditions, such as excess carbon-rich organic matter and limitations of other nutritional elements. These plastics have similar physicochemical properties to fossil-fuel-based plastics and can be used in various applications, including medical devices, implants, drug delivery devices, wound dressings, and tissue engineering. PHA production can also be achieved using waste materials, such as food waste, as a low-cost carbon source. The use of PHA can contribute to the reduction of petroleum-based plastic pollution and promote sustainable development.
How does the organic load affect VFA production?4 answersThe organic load has a significant impact on volatile fatty acid (VFA) production. Higher organic loading rates can lead to increased VFA concentrations, which can affect the stability and efficiency of the biogas production process. In some cases, high organic loading rates can result in the accumulation of VFAs, such as propionic acid, which can cause process failure. The composition of VFAs can also be influenced by changes in the feedstock composition, with different microbial populations emerging as the feedstock ratio is altered. Additionally, the addition of biochar can contribute to a more balanced state of the anaerobic process, preventing biomass washout and improving process stability. Overall, the organic load plays a crucial role in VFA production and can impact the efficiency and stability of biogas production processes.
What bacterial species are known to contribute to the production of polyhydroxyalkanoate from wastewater?5 answersPolyhydroxyalkanoates (PHA) can be produced from wastewater by various bacterial species. Halomonas cupida J9, a halophilic bacterium, has been isolated from highly saline wastewater and shown to produce PHA from glucose and glycerol. Bacillus pumilus FMI3, isolated from lipid-containing wastewater, has also been found to produce PHA from crude glycerol. Additionally, other bacteria from municipal wastewater have been identified as PHA producers, including isolates UiTM-E1 and UiTM-E2. Furthermore, extreme Haloferax mediterranei has been investigated for PHA production using sesame wastewater as a carbon source. Finally, Cupriavidus necator DSM 545 and Hydrogenophaga pseudoflava DSM 1034 have been screened for their ability to produce PHA from fruit and vegetable processing waste streams. These studies demonstrate the potential of various bacterial species to contribute to the production of PHA from different types of wastewater.
Which bacterial species are known to contribute to the production of polyhydroxyalkanoate?5 answersPolyhydroxyalkanoates (PHAs) are produced by various bacterial species. Pseudomonas sp. strains, including Pseudomonas putida (NRRL B-14875, KT2440, and GN112), have been studied for their ability to produce PHAs from different alkanoic acids. Other bacterial genera such as Acinetobacter, Bacillus, Cupriavidus, Escherichia, Klebsiella, Lelliottia, Lysinibacillus, Mammaliicoccus, Oceanobacillus, Pantoea, Peribacillus, Priestia, Rahnella, Staphylococcus, and Stenotrophomonas have also been found to produce PHAs. Halomonas cupida J9, a halophilic bacterium, has been identified as a PHA producer. Additionally, Acinetobacter lwoffii has been shown to produce PHAs using waste cooking oil as a carbon source. Cupriavidus necator DSM 545 and Hydrogenophaga pseudoflava DSM 1034 have been found to accumulate PHAs from fruit and vegetable processing waste streams.