Why the hot water flow rate increase, the efficiency decrease in a heat exchanger using plate heat exchanger?
Best insight from top research papers
When the hot water flow rate increases in a plate heat exchanger, the efficiency of the heat exchanger decreases . This is because the increased flow rate leads to a decrease in the residence time of the hot water in the heat exchanger, reducing the amount of time available for heat transfer to occur. As a result, the heat transfer rate and effectiveness of the heat exchanger decrease, leading to a decrease in efficiency . Additionally, the increased flow rate can cause deformation of the plates in the heat exchanger, affecting heat transfer and pressure drop characteristics . Therefore, it is important to carefully consider the flow rate in order to optimize the efficiency of a plate heat exchanger.
Answers from top 4 papers
More filters
| Papers (4) | Insight |
|---|---|
01 Jun 2020 | The provided paper does not mention anything about the efficiency of a heat exchanger decreasing when the hot water flow rate increases. |
| The provided paper does not directly address the relationship between hot water flow rate and efficiency in a plate heat exchanger. | |
| The provided paper does not mention anything about the efficiency decreasing in a heat exchanger using a plate heat exchanger when the hot water flow rate increases. | |
| The provided paper does not provide information on why the efficiency decreases when the hot water flow rate increases in a plate heat exchanger. |
Related Questions
Why increasing water flow rate can increase the absorption efficiency in gas absorption column ?4 answersIncreasing water flow rate can enhance absorption efficiency in a gas absorption column due to the improved dynamics and hydrodynamics within the system. As water flow rate increases, the range of possible air flow rates decreases until flooding onset, indicating a more controlled absorption process. Additionally, higher liquid flow rates have been shown to increase CO2 removal efficiency in various absorption studies, such as with non-precipitating potassium carbonate promoted with glycine and monoethanolamine (MEA) solutions. The absorption efficiency benefits from the increased liquid flow rate by facilitating better contact between the gas and liquid phases, leading to more effective absorption of the target gas components like CO2, ultimately improving the overall performance of the absorption column.
How does crossflow affect heat transfer efficiency in heat exchangers?5 answersCrossflow significantly impacts heat transfer efficiency in heat exchangers. The design of crossflow micro heat exchangers aims to maximize heat transfer between different fluids while maintaining low pressure drops. In a study on a flexible heat exchanger tube, it was found that internal steady flow can amplify cross-flow-induced flutter while reducing critical velocities and flutter frequencies. Additionally, a mathematical model for airflow through a cross-flow plate heat exchanger showed that the material used, such as steel, can affect the efficiency of heat transfer from exhaust air to supply air. Furthermore, a crossflow heat exchanger design with independent fan control for cooling and hot air flow enhances heat exchange efficiency without direct contact between the two air streams. These findings collectively highlight the crucial role of crossflow in determining heat transfer efficiency in various heat exchanger configurations.
How solar panel efficiency decrease if increasing temperature?5 answersIncreasing temperature has a negative impact on the efficiency of solar panels. The efficiency of photovoltaic (PV) panels decreases as the operating temperature increases. This decrease in efficiency is due to the effect of temperature on the power and voltage of the PV panels. High levels of solar irradiation can cause an increase in the operating temperature of PV panels, leading to a decrease in their efficiency and lifespan. Various cooling techniques have been implemented to address this issue and maximize the efficiency of solar panels. For example, the use of composite phase change materials integrated with solar panels can significantly reduce the operating temperature and improve the power output and efficiency of the panels. Additionally, the use of air cooling systems can also effectively reduce the operating temperature of PV panels and increase their electrical performance.
What is the efficiency of an electric hot plate?5 answersThe efficiency of an electric hot plate can vary depending on its design and operative parameters. Optimization of these parameters can be achieved through statistical modeling and regression equations. Different hot plates have been developed with various features to improve efficiency. For example, one hot plate design includes a multi-turn ring structure heating tube, which provides uniform heat transmission and reduces aluminum consumption. Another design incorporates glass fiber panels with heat-tracing slots and electric heat-tracing wires, resulting in energy-saving effects. Additionally, an electric hot plate with a fume extraction portion and control system can reduce power consumption and extract fumes to protect users' health. Overall, the efficiency of an electric hot plate can be improved through innovative designs and optimization of operative parameters.
What is the effect of heat exchange on gas meters?5 answersHeat exchange has various effects on gas meters. In one study, a heat exchanger was designed to improve the efficiency of energy transfer in a thermal source generator. Another study focused on the impact of heat exchange on the atomization process, showing that a decrease in wall temperature ratio and an increase in gas thermal conductivity can lead to more efficient atomization and the production of finer droplets. Additionally, a gas heat exchange device was developed to maintain uniform and stable temperature reduction in flow channels, thereby improving temperature reduction efficiency. These findings highlight the importance of heat exchange in optimizing energy transfer and temperature control in gas meters.
Current density affect the roughness of a plate heat exchanger surface?5 answersThe roughness of a plate heat exchanger surface can be affected by the current density. Experimental analysis conducted by Wajs and Mikielewiczand Soontarapiromsook et al.showed that increasing the roughness of the heat transfer surface led to an increase in the heat transfer coefficient. Wajs and Mikielewiczfound that increasing the roughness by using glass shot or glass microbeads resulted in higher heat transfer coefficients on both the cooling and heating sides of the heat exchanger. Similarly, Soontarapiromsook et al.observed that increasing the surface roughness led to an increase in the heat transfer coefficient and frictional pressure gradient. These findings suggest that higher current densities can lead to increased roughness on the heat transfer surface, which in turn enhances heat transfer in plate heat exchangers.