Power consumption is forecast by the International Technology Roadmap of Semiconductors (ITRS) to pose long-term technical challenges for the semiconductor industry. The purpose of this paper is threefold: (1) to provide an overview of strategies for powering MEMS via non-regenerative and regenerative power supplies; (2) to review the fundamentals of piezoelectric energy harvesting, along with recent advancements, and (3) to discuss future trends and applications for piezoelectric energy harvesting technology. The paper concludes with a discussion of research needs that are critical for the enhancement of piezoelectric energy harvesting devices.

/pdf/powering-mems-portable-devices-a-review-of-non-regenerative-30r5zxggdp.pdf

Powering MEMS portable devices—a review of non-regenerative and regenerative power supply systems with special emphasis on piezoelectric energy harvesting systems

The long-standing popularity of thermoelectric materials has contributed to the creation of various thermoelectric devices and stimulated the development of strategies to improve their thermoelectric performance. In this review, we aim to comprehensively summarize the state-of-the-art strategies for the realization of high-performance thermoelectric materials and devices by establishing the links between synthesis, structural characteristics, properties, underlying chemistry and physics, including structural design (point defects, dislocations, interfaces, inclusions, and pores), multidimensional design (quantum dots/wires, nanoparticles, nanowires, nano- or microbelts, few-layered nanosheets, nano- or microplates, thin films, single crystals, and polycrystalline bulks), and advanced device design (thermoelectric modules, miniature generators and coolers, and flexible thermoelectric generators). The outline of each strategy starts with a concise presentation of their fundamentals and carefully selected examples. In the end, we point out the controversies, challenges, and outlooks toward the future development of thermoelectric materials and devices. Overall, this review will serve to help materials scientists, chemists, and physicists, particularly students and young researchers, in selecting suitable strategies for the improvement of thermoelectrics and potentially other relevant energy conversion technologies.

Advanced Thermoelectric Design: From Materials and Structures to Devices

More than a decade of research in the field of thermal, motion, vibration and electromagnetic radiation energy harvesting has yielded increasing power output and smaller embodiments. Power management circuits for rectification and DC–DC conversion are becoming able to efficiently convert the power from these energy harvesters. This paper summarizes recent energy harvesting results and their power management circuits.

/pdf/micropower-energy-harvesting-1l9ase94z1.pdf

Micropower energy harvesting

More than a decade of research in the field of thermal, motion, vibration and electromagnetic radiation energy harvesting has yielded increasing power output and smaller embodiments. Power management circuits for rectification and DC-DC conversion are becoming able to efficiently convert the power from these energy harvesters. This paper summarizes recent energy harvesting results and their power management circuits.

In response to the thread of environmental and ecological degradation along with projected fossil fuel depletion the active search for efficient renewable energy conversion technologies has been attempted in various research areas including the field of thermoelectrics. Despite the availability of considerable amounts of waste and natural heat stored in warm fluids (<250 °C) a lack of environmentally friendly materials with high natural abundance, low manufacturing cost and high thermoelectric efficiency impedes the widespread use of thermoelectric generators for energy harvesting on a large scale. In this perspective, we examine the possibility of using organic conducting polymers in thermoelectric applications. We provide an overview of the background and the key concepts of organic thermoelectrics and illustrate some of the first prototypes of polymer-based organic thermoelectric generators.

/pdf/towards-polymer-based-organic-thermoelectric-generators-1cahpciqp9.pdf

Towards polymer-based organic thermoelectric generators

This work describes the first thermoelectric devices based on the V-VI-compounds Bi/sub 2/Te/sub 3/ and (Bi,Sb)/sub 2/Te/sub 3/ which can be manufactured by means of regular thin film technology in combination with microsystem technology. Fabrication concept, material deposition for some 10-μm-thick layers and the properties of the deposited thermoelectric materials will be reported. First device properties for Peltier-coolers and thermogenerators will be shown as well as investigations on long term and cycling stability. Data on metal/semiconductor contact resistance were extracted form device data. Device characteristics like response time for a Peltier-cooler and power output for a thermogenerator will be compared to commercial devices.

New thermoelectric components using microsystem technologies

Thermoelectric thin film micro-devices with high packing densities of thermoelectric legs are of high demand in micro-systems for self-standing and so called waste energy self-powered sensor systems for wireless data transfer. One technical solution for such micro-devices is offered by the Micropelt technology. The recent development status of the Micropelt micro thermogenerators will be presented. The Micropelt platform technology now allows devices with up to ~8000 p-n-couples per cm2. Open circuit voltages achieved so far were about 2.3 V at 10 K temperature difference. Maximum power output was measured to be 2.8 mW. Thus they are suited as power supplies for harvesting energy in stand alone sensor systems for wireless data transmission. An evaluation setup to perform first level tests for the efficiency of harvesting waste energy using the microstructured thermogenerators will be presented.

https://www.researchgate.net/profile/Joachim_Nurnus/publication/4350825_New_high_density_micro_structured_thermogenerators_for_stand_alone_sensor_systems/links/09e415081109c928e2000000.pdf

A. Schubert

Papers

New thermoelectric components using microsystem technologies

New high density micro structured thermogenerators for stand alone sensor systems