Radio frequency (RF) energy transfer and harvesting techniques have recently become alternative methods to power the next-generation wireless networks As this emerging technology enables proactive energy replenishment of wireless devices, it is advantageous in supporting applications with quality-of-service requirements In this paper, we present a comprehensive literature review on the research progresses in wireless networks with RF energy harvesting capability, which is referred to as RF energy harvesting networks (RF-EHNs) First, we present an overview of the RF-EHNs including system architecture, RF energy harvesting techniques, and existing applications Then, we present the background in circuit design as well as the state-of-the-art circuitry implementations and review the communication protocols specially designed for RF-EHNs We also explore various key design issues in the development of RF-EHNs according to the network types, ie, single-hop networks, multiantenna networks, relay networks, and cognitive radio networks Finally, we envision some open research directions

Wireless Networks With RF Energy Harvesting: A Contemporary Survey

We present the design of a communication system that enables two devices to communicate using ambient RF as the only source of power. Our approach leverages existing TV and cellular transmissions to eliminate the need for wires and batteries, thus enabling ubiquitous communication where devices can communicate among themselves at unprecedented scales and in locations that were previously inaccessible.To achieve this, we introduce ambient backscatter, a new communication primitive where devices communicate by backscattering ambient RF signals. Our design avoids the expensive process of generating radio waves; backscatter communication is orders of magnitude more power-efficient than traditional radio communication. Further, since it leverages the ambient RF signals that are already around us, it does not require a dedicated power infrastructure as in traditional backscatter communication. To show the feasibility of our design, we prototype ambient backscatter devices in hardware and achieve information rates of 1 kbps over distances of 2.5 feet and 1.5 feet, while operating outdoors and indoors respectively. We use our hardware prototype to implement proof-of-concepts for two previously infeasible ubiquitous communication applications.

/pdf/ambient-backscatter-wireless-communication-out-of-thin-air-tm53bz3e4m.pdf

Ambient backscatter: wireless communication out of thin air

Some pioneer WiFi signal based human activity recognition systems have been proposed. Their key limitation lies in the lack of a model that can quantitatively correlate CSI dynamics and human activities. In this paper, we propose CARM, a CSI based human Activity Recognition and Monitoring system. CARM has two theoretical underpinnings: a CSI-speed model, which quantifies the correlation between CSI value dynamics and human movement speeds, and a CSI-activity model, which quantifies the correlation between the movement speeds of different human body parts and a specific human activity. By these two models, we quantitatively build the correlation between CSI value dynamics and a specific human activity. CARM uses this correlation as the profiling mechanism and recognizes a given activity by matching it to the best-fit profile. We implemented CARM using commercial WiFi devices and evaluated it in several different environments. Our results show that CARM achieves an average accuracy of greater than 96%.

/pdf/understanding-and-modeling-of-wifi-signal-based-human-s17lmln5eh.pdf

Understanding and Modeling of WiFi Signal Based Human Activity Recognition

Wireless charging is a technology of transmitting power through an air gap to electrical devices for the purpose of energy replenishment. The recent progress in wireless charging techniques and development of commercial products have provided a promising alternative way to address the energy bottleneck of conventionally portable battery-powered devices. However, the incorporation of wireless charging into the existing wireless communication systems also brings along a series of challenging issues with regard to implementation, scheduling, and power management. In this paper, we present a comprehensive overview of wireless charging techniques, the developments in technical standards, and their recent advances in network applications. In particular, with regard to network applications, we review the static charger scheduling strategies, mobile charger dispatch strategies and wireless charger deployment strategies. Additionally, we discuss open issues and challenges in implementing wireless charging technologies. Finally, we envision some practical future network applications of wireless charging.

Wireless Charging Technologies: Fundamentals, Standards, and Network Applications

In many applications, we have to identify an object and then locate the object to within high precision (centimeter- or millimeter-level). Legacy systems that can provide such accuracy are either expensive or suffering from performance degradation resulting from various impacts, e.g., occlusion for computer vision based approaches. In this work, we present an RFID-based system, Tagoram, for object localization and tracking using COTS RFID tags and readers. Tracking mobile RFID tags in real time has been a daunting task, especially challenging for achieving high precision. Our system achieves these three goals by leveraging the phase value of the backscattered signal, provided by the COTS RFID readers, to estimate the location of the object. In Tagoram, we exploit the tag's mobility to build a virtual antenna array by using readings from a few physical antennas over a time window. To illustrate the basic idea of our system, we firstly focus on a simple scenario where the tag is moving along a fixed track known to the system. We propose Differential Augmented Hologram (DAH) which will facilitate the instant tracking of the mobile RFID tag to a high precision. We then devise a comprehensive solution to accurately recover the tag's moving trajectories and its locations, relaxing the assumption of knowing tag's track function in advance. We have implemented the Tagoram system using COTS RFID tags and readers. The system has been tested extensively in the lab environment and used for more than a year in real airline applications. For lab environment, we can track the mobile tags in real time with a millimeter accuracy to a median of 5mm and 7.29mm using linear and circular track respectively. In our year- long large scale baggage sortation systems deployed in two airports, our results from real deployments show that Tagoram can achieve a centimeter-level accuracy to a median of 6.35cm in these real deployments.

/pdf/tagoram-real-time-tracking-of-mobile-rfid-tags-to-high-flnd3bowls.pdf

Tagoram: real-time tracking of mobile RFID tags to high precision using COTS devices

RF-powered computers are small devices that compute and communicate using only the power that they harvest from RF signals. While existing technologies have harvested power from ambient RF sources (e.g., TV broadcasts), they require a dedicated gateway (like an RFID reader) for Internet connectivity. We present Wi-Fi Backscatter, a novel communication system that bridges RF-powered devices with the Internet. Specifically, we show that it is possible to reuse existing Wi-Fi infrastructure to provide Internet connectivity to RF-powered devices. To show Wi-Fi Backscatter's feasibility, we build a hardware prototype and demonstrate the first communication link between an RF-powered device and commodity Wi-Fi devices. We use off-the-shelf Wi-Fi devices including Intel Wi-Fi cards, Linksys Routers, and our organization's Wi-Fi infrastructure, and achieve communication rates of up to 1 kbps and ranges of up to 2.1 meters. We believe that this new capability can pave the way for the rapid deployment and adoption of RF-powered devices and achieve ubiquitous connectivity via nearby mobile devices that are Wi-Fi enabled.

/pdf/wi-fi-backscatter-internet-connectivity-for-rf-powered-4nynz6f8gp.pdf

Wi-fi backscatter: internet connectivity for RF-powered devices

Communication primitives such as coding and multiple antenna processing have provided significant benefits for traditional wireless systems. Existing designs, however, consume significant power and computational resources, and hence cannot be run on low complexity, power constrained backscatter devices. This paper makes two main contributions: (1) we introduce the first multi-antenna cancellation design that operates on backscatter devices while retaining a small form factor and power footprint, (2) we introduce a novel coding mechanism that enables long range communication as well as concurrent transmissions and can be decoded on backscatter devices. We build hardware prototypes of the above designs that can be powered solely using harvested energy from TV and solar sources. The results show that our designs provide benefits for both RFID and ambient backscatter systems: they enable RFID tags to communicate directly with each other at distances of tens of meters and through multiple walls. They also increase the communication rate and range achieved by ambient backscatter systems by 100X and 40X respectively. We believe that this paper represents a substantial leap in the capabilities of backscatter communication.

/pdf/turbocharging-ambient-backscatter-communication-zcnf6fcoep.pdf

Turbocharging ambient backscatter communication

Energy-scavenging devices with general-purpose microcontrollers can support arbitrarily complex sensing tasks in theory, but in practice, energy limitations impose severe constraints on the application space. Richer sensing such as image capture would enable many new applications to take advantage of energy scavenging. Richer sensing faces two key challenges: efficiently retaining the necessary amount of harvested energy, and storing and communicating large units of sensor data. This paper presents the WISPCam, a passive UHF RFID camera tag based on the Wireless Identification and Sensing Platform that overcomes these two challenges to support reliable image capture and transmission while powered by an RFID reader. The WISPCam uses a novel charge-storage scheme designed specifically to match the image sensor's needs. This scheme optimally balances capacitance and leakage to improve the sensitivity and efficiency of the power harvester. The WISPCam also uses a novel data storage and communication scheme to reliably support the transfer of complete images to an RFID reader application. The WISPCam makes battery-free image capture practical for applications such as mechanical gauge reading and surveillance, both demonstrated in this paper, and opens the door to richer sensing applications on battery-free devices.

/pdf/wispcam-a-battery-free-rfid-camera-1vozmozjli.pdf

WISPCam: A battery-free RFID camera

An ambient RF energy harvesting sensor node with onboard sensing and communication functionality was developed and tested. The minimal RF input power required for sensor node operation was -18 dBm (15.8 μW). Using a 6 dBi receive antenna, the most sensitive RF harvester was shown to operate at a distance of 10.4 km from a 1 MW UHF television broadcast transmitter, and over 200 m from a cellular base transceiver station. A complete ambient RF-powered prototype was constructed which measured temperature and light level and wirelessly transmitted these measurements.

Aaron N. Parks

Papers

Ambient backscatter: wireless communication out of thin air

Wi-fi backscatter: internet connectivity for RF-powered devices

Turbocharging ambient backscatter communication

WISPCam: A battery-free RFID camera

A wireless sensing platform utilizing ambient RF energy