An insight into the analogies, state-of-the-art technologies, concepts, and prospects under the umbrella of perovskite materials (both inorganic-organic hybrid halide perovskites and ferroelectric perovskites) for future multifunctional energy conversion and storage devices is provided. Often, these are considered entirely different branches of research; however, considering them simultaneously and holistically can provide several new opportunities. Recent advancements have highlighted the potential of hybrid perovskites for high-efficiency solar cells. The intrinsic polar properties of these materials, including the potential for ferroelectricity, provide additional possibilities for simultaneously exploiting several energy conversion mechanisms such as the piezoelectric, pyroelectric, and thermoelectric effect and electrical energy storage. The presence of these phenomena can support the performance of perovskite solar cells. The energy conversion using these effects (piezo-, pyro-, and thermoelectric effect) can also be enhanced by a change in the light intensity. Thus, there lies a range of possibilities for tuning the structural, electronic, optical, and magnetic properties of perovskites to simultaneously harvest energy using more than one mechanism to realize an improved efficiency. This requires a basic understanding of concepts, mechanisms, corresponding material properties, and the underlying physics involved with these effects.

Mutual Insight on Ferroelectrics and Hybrid Halide Perovskites: A Platform for Future Multifunctional Energy Conversion.

A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties

This review provides a detailed overview of the energy harvesting technologies associated with piezoelectric materials along with the closely related sub-classes of pyroelectrics and ferroelectrics. These properties are, in many cases, present in the same material, providing the intriguing prospect of a material that can harvest energy from multiple sources including vibration, thermal fluctuations and light. Piezoelectric materials are initially discussed in the context of harvesting mechanical energy from vibrations using inertial energy harvesting, which relies on the resistance of a mass to acceleration, and kinematic energy harvesting which directly couples the energy harvester to the relative movement of different parts of a source. Issues related to mode of operation, loss mechanisms and using non-linearity to enhance the operating frequency range are described along with the potential materials that could be employed for harvesting vibrations at elevated temperatures. In addition to inorganic piezoelectric materials, compliant piezoelectric materials are also discussed. Piezoelectric energy harvesting devices are complex multi-physics systems requiring advanced methodologies to maximise their performance. The research effort to develop optimisation methods for complex piezoelectric energy harvesters is then reviewed. The use of ferroelectric or multi-ferroic materials to convert light into chemical or electrical energy is then described in applications where the internal electric field can prevent electron–hole recombination or enhance chemical reactions at the ferroelectric surface. Finally, pyroelectric harvesting generates power from temperature fluctuations and this review covers the modes of pyroelectric harvesting such as simple resistive loading and Olsen cycles. Nano-scale pyroelectric systems and novel micro-electro-mechanical-systems designed to increase the operating frequency are discussed.

/pdf/piezoelectric-and-ferroelectric-materials-and-structures-for-39myuuqvo7.pdf

Piezoelectric and ferroelectric materials and structures for energy harvesting applications

The recent progress in ferroelectricity and antiferroelectricity in HfO2-based thin films is reported. Most ferroelectric thin film research focuses on perovskite structure materials, such as Pb(Zr,Ti)O3, BaTiO3, and SrBi2Ta2O9, which are considered to be feasible candidate materials for non-volatile semiconductor memory devices. However, these conventional ferroelectrics suffer from various problems including poor Si-compatibility, environmental issues related to Pb, large physical thickness, low resistance to hydrogen, and small bandgap. In 2011, ferroelectricity in Si-doped HfO2 thin films was first reported. Various dopants, such as Si, Zr, Al, Y, Gd, Sr, and La can induce ferro-electricity or antiferroelectricity in thin HfO2 films. They have large remanent polarization of up to 45 μC cm(-2), and their coercive field (≈1-2 MV cm(-1)) is larger than conventional ferroelectric films by approximately one order of magnitude. Furthermore, they can be extremely thin ( 5 eV). These differences are believed to overcome the barriers of conventional ferroelectrics in memory applications, including ferroelectric field-effect-transistors and three-dimensional capacitors. Moreover, the coupling of electric and thermal properties of the antiferroelectric thin films is expected to be useful for various applications, including energy harvesting/storage, solid-state-cooling, and infrared sensors.

Ferroelectricity and Antiferroelectricity of Doped Thin HfO2‐Based Films

This review covers energy harvesting technologies associated with pyroelectric materials and systems. Such materials have the potential to generate electrical power from thermal fluctuations and is a less well explored form of thermal energy harvesting than thermoelectric systems. The pyroelectric effect and potential thermal and electric field cycles for energy harvesting are explored. Materials of interest are discussed and pyroelectric architectures and systems that can be employed to improve device performance, such as frequency and power level, are described. In addition to the solid materials employed, the appropriate pyroelectric harvesting circuits to condition and store the electrical power are discussed.

/pdf/pyroelectric-materials-and-devices-for-energy-harvesting-46bfynmcr3.pdf

Pyroelectric materials and devices for energy harvesting applications

This paper deals with small-power energy harvesting from heat. It can be achieved using both thermoelectric and pyroelectric effects. In the first case, temperature gradients are necessary. The main difficulty of thermoelectric energy harvesting is imposing a large temperature gradient. This requires huge heat flows because of the limited surface heat exchanges and the large heat conductivity of thermoelectric materials. This results in a drastic decrease of power and the efficiency of conversion. In case of pyroelectric energy harvesting, a time varying temperature is necessary. Although such a temperature time profile is hard to find, the overall optimization is easier than the thermoelectric strategy. Indeed, it depends much less on heat exchange between the sample and the outer medium, than on heat capacity that dimensions optimization may easily compensate. As a consequence, it is shown that the efficiency and output power may be much larger using pyroelectric energy harvesting than thermoelectric methods. For instance, using a limited temperature gradient due to the limited heat exchange, a maximum efficiency of 1.7% of Carnot efficiency can be expected using a thermoelectric module. On the contrary, a pyroelectric device may reach an efficiency up to 50% of Carnot efficiency. Finally, an illustration shows an estimation of the output power that could be expected from natural time variations of temperature of a wearable device. Power peaks up to 0. 2m W cm −3 were found and a mean power of 1 μ Wc m −3 on average was determined within 24 h testing.

/pdf/on-thermoelectric-and-pyroelectric-energy-harvesting-1cd1trj1pc.pdf

On thermoelectric and pyroelectric energy harvesting

Bistable vibration energy harvesters are attracting more and more interest because of their capability to scavenge energy over a large frequency band. The bistable effect is usually based on magnetic interaction or buckled beams. This paper presents a novel architecture based on amplified piezoelectric structures. This buckled spring‐mass architecture allows the energy of the dynamic mass to be converted into electrical energy in the piezoelectric materials as efficiently as possible. Modeling and design are performed and a normalized expression of the harvester behavior is given. Chirp and band-limited noise excitations are used to evaluate the proposed harvester’s performances. Simulation and experimental results are in good agreement. A method of using a spectrum plot for investigating the interwell motion is presented. The effect of the electric load impedance matching strategy is also studied. Results and comparisons with the literature show that the proposed device combines a large bandwidth and a high power density. (Some figures may appear in colour only in the online journal)

https://iopscience.iop.org/article/10.1088/0964-1726/22/3/035013/pdf

Novel piezoelectric bistable oscillator architecture for wideband vibration energy harvesting

This article presents a novel nonlinear energy extraction technique for piezoelectric vibration energy harvesting. The proposed approach is an improvement of the previous technique, “synchronous el...

Piezoelectric vibration energy harvesting by optimized synchronous electric charge extraction

This article presents a new method of harvesting ambient renewable micro-energy by using both thermoelectric and latent heat effects. We designed a prototype work unit made of phase change material (PCM) and a thermoelectric generator (TEG) and used a numerical method to inspect system performance. Special attention was paid to the implementation of ambient loading (including solar radiation, temperature variation and wind speed) in the numerical simulation process. The calculated results show that the proposed work unit (TEG & PCM) can harvest micro-energy day and night, thanks to the heat storage function of the PCM which is placed behind the TEG.

Amen Agbossou

Papers

On thermoelectric and pyroelectric energy harvesting

Novel piezoelectric bistable oscillator architecture for wideband vibration energy harvesting

Piezoelectric vibration energy harvesting by optimized synchronous electric charge extraction

Solar micro-energy harvesting based on thermoelectric and latent heat effects. Part II: Experimental analysis

Rock fall impact on reinforced concrete slab: an experimental approach