There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

Molecularly imprinted polymers and their use in biomimetic sensors.

An analyte monitor includes a sensor, a sensor control unit, and a display unit. The sensor has, for example, a substrate, a recessed channel formed in the substrate, and conductive material disposed in the recessed channel to form a working electrode. The sensor control unit typically has a housing adapted for placement on skin and is adapted to receive a portion of an electrochemical sensor. The sensor control unit also includes two or more conductive contacts disposed on the housing and configured for coupling to two or more contact pads on the sensor. A transmitter is disposed in the housing and coupled to the plurality of conductive contacts for transmitting data obtained using the sensor. The display unit has a receiver for receiving data transmitted by the transmitter of the sensor control unit and a display coupled to the receiver for displaying an indication of a level of an analyte. The analyte monitor may also be part of a drug delivery system to alter the level of the analyte based on the data obtained using the sensor.

Analyte Monitoring Device And Methods Of Use

Fundamental and applied research in chemistry and biology benefits from opportunities provided by droplet-based microfluidic systems. These systems enable the miniaturization of reactions by compartmentalizing reactions in droplets of femoliter to microliter volumes. Compartmentalization in droplets provides rapid mixing of reagents, control of the timing of reactions on timescales from milliseconds to months, control of interfacial properties, and the ability to synthesize and transport solid reagents and products. Droplet-based microfluidics can help to enhance and accelerate chemical and biochemical screening, protein crystallization, enzymatic kinetics, and assays. Moreover, the control provided by droplets in microfluidic devices can lead to new scientific methods and insights.

/pdf/reactions-in-droplets-in-microfluidic-channels-22iig0bcxm.pdf

Reactions in Droplets in Microfluidic Channels

Molecular imprinting technology (MIT) concerns formation of selective sites in a polymer matrix with the memory of a template. Recently, molecularly imprinted polymers (MIPs) have aroused extensive attention and been widely applied in many fields, such as solid-phase extraction, chemical sensors and artificial antibodies owing to their desired selectivity, physical robustness, thermal stability, as well as low cost and easy preparation. With the rapid development of MIT as a research hotspot, it faces a number of challenges, involving biological macromolecule imprinting, heterogeneous binding sites, template leakage, incompatibility with aqueous media, low binding capacity and slow mass transfer, which restricts its applications in various aspects. This critical review briefly reviews the current status of MIT, particular emphasis on significant progresses of novel imprinting methods, some challenges and effective strategies for MIT, and highlighted applications of MIPs. Finally, some significant attempts in further developing MIT are also proposed (236 references).

http://ir.yic.ac.cn/bitstream/133337/4853/1/Recent%20advances%20in%20molecular%20imprinting%20technology%20current%20status%2c%20challenges%20and%20highlighted%20applications.pdf

Recent advances in molecular imprinting technology: current status, challenges and highlighted applications

A new approach is presented for analysis of microplastics in environmental samples, based on selective fluorescent staining using Nile Red (NR), followed by density-based extraction and filtration. The dye adsorbs onto plastic surfaces and renders them fluorescent when irradiated with blue light. Fluorescence emission is detected using simple photography through an orange filter. Image-analysis allows fluorescent particles to be identified and counted. Magnified images can be recorded and tiled to cover the whole filter area, allowing particles down to a few micrometres to be detected. The solvatochromic nature of Nile Red also offers the possibility of plastic categorisation based on surface polarity characteristics of identified particles. This article details the development of this staining method and its initial cross-validation by comparison with infrared (IR) microscopy. Microplastics of different sizes could be detected and counted in marine sediment samples. The fluorescence staining identified the same particles as those found by scanning a filter area with IR-microscopy.

/pdf/a-rapid-screening-approach-to-detect-and-quantify-2tb4686qo5.pdf

A rapid-screening approach to detect and quantify microplastics based on fluorescent tagging with Nile Red

A suspension polymerization technique suitable for molecular imprinting is described, based on the use of a liquid perfluorocarbon as the dispersing phase. This dispersant does not interfere with the interactions between functional monomers and print molecules required for the recognition process during molecular imprinting. The method produces polymer beads, with almost quantitative yield, which can be used after only a simple washing step. An acrylate polymer with perfluorocarbon and poly(oxyethylene) ester groups was used to stabilize an emulsion of functional monomer, cross-linker, print molecule, initiator, and porogenic solvent in perfluoro(methylcyclohexane). Initiation of polymerization by UV irradiation resulted in polymer beads. The average bead size could be controlled between about 50 and 5 μm by varying the amount of stabilizing polymer. SEM of the beads indicated spherical particles with morphology typical of beads made by suspension polymerization. The technique was applicable to a range of...

Molecularly imprinted polymer beads : Suspension polymerization using a liquid perfluorocarbon as the dispersing phase

Synthetic strategies for the generation of molecularly imprinted organic polymers.

Molecular imprinting is a technique for producing chemically selective binding sites, which recognize a particular molecule, in a macroporous polymer matrix. This paper reviews recent advances in imprinting methodology, particularly emphasizing some recently introduced functional monomers and methods which directly yield polymeric material suitable for chromatography. Following this, attempts to incorporate imprinted polymers into a range of analytical methodologies are critically discussed, with some pointers to likely directions for future research.

Andrew G. Mayes

Papers

A rapid-screening approach to detect and quantify microplastics based on fluorescent tagging with Nile Red

Molecularly imprinted polymer beads : Suspension polymerization using a liquid perfluorocarbon as the dispersing phase

Synthetic strategies for the generation of molecularly imprinted organic polymers.

Molecularly imprinted polymers : useful materials for analytical chemistry ?

Comparative study of imprinted polymer particles prepared by different polymerisation methods