Metamaterials are artificially fabricated materials that allow for the control of light and acoustic waves in a manner that is not possible in nature. This Review covers the recent developments in the study of so-called metasurfaces, which offer the possibility of controlling light with ultrathin, planar optical components. Conventional optical components such as lenses, waveplates and holograms rely on light propagation over distances much larger than the wavelength to shape wavefronts. In this way substantial changes of the amplitude, phase or polarization of light waves are gradually accumulated along the optical path. This Review focuses on recent developments on flat, ultrathin optical components dubbed 'metasurfaces' that produce abrupt changes over the scale of the free-space wavelength in the phase, amplitude and/or polarization of a light beam. Metasurfaces are generally created by assembling arrays of miniature, anisotropic light scatterers (that is, resonators such as optical antennas). The spacing between antennas and their dimensions are much smaller than the wavelength. As a result the metasurfaces, on account of Huygens principle, are able to mould optical wavefronts into arbitrary shapes with subwavelength resolution by introducing spatial variations in the optical response of the light scatterers. Such gradient metasurfaces go beyond the well-established technology of frequency selective surfaces made of periodic structures and are extending to new spectral regions the functionalities of conventional microwave and millimetre-wave transmit-arrays and reflect-arrays. Metasurfaces can also be created by using ultrathin films of materials with large optical losses. By using the controllable abrupt phase shifts associated with reflection or transmission of light waves at the interface between lossy materials, such metasurfaces operate like optically thin cavities that strongly modify the light spectrum. Technology opportunities in various spectral regions and their potential advantages in replacing existing optical components are discussed.

Flat Optics With Designer Metasurfaces

http://www.nanoscience.gatech.edu/paper/2012/12_NE_04.pdf

Flexible triboelectric generator

This paper reviews the state-of-the art in vibration energy harvesting for wireless, self-powered microsystems. Vibration-powered generators are typically, although not exclusively, inertial spring and mass systems. The characteristic equations for inertial-based generators are presented, along with the specific damping equations that relate to the three main transduction mechanisms employed to extract energy from the system. These transduction mechanisms are: piezoelectric, electromagnetic and electrostatic. Piezoelectric generators employ active materials that generate a charge when mechanically stressed. A comprehensive review of existing piezoelectric generators is presented, including impact coupled, resonant and human-based devices. Electromagnetic generators employ electromagnetic induction arising from the relative motion between a magnetic flux gradient and a conductor. Electromagnetic generators presented in the literature are reviewed including large scale discrete devices and wafer-scale integrated versions. Electrostatic generators utilize the relative movement between electrically isolated charged capacitor plates to generate energy. The work done against the electrostatic force between the plates provides the harvested energy. Electrostatic-based generators are reviewed under the classifications of in-plane overlap varying, in-plane gap closing and out-of-plane gap closing; the Coulomb force parametric generator and electret-based generators are also covered. The coupling factor of each transduction mechanism is discussed and all the devices presented in the literature are summarized in tables classified by transduction type; conclusions are drawn as to the suitability of the various techniques.

/pdf/energy-harvesting-vibration-sources-for-microsystems-46t885pwdp.pdf

Energy harvesting vibration sources for microsystems applications

Energy harvesting has grown from long-established concepts into devices for powering ubiquitously deployed sensor networks and mobile electronics. Systems can scavenge power from human activity or derive limited energy from ambient heat, light, radio, or vibrations. Ongoing power management developments enable battery-powered electronics to live longer. Such advances include dynamic optimization of voltage and clock rate, hybrid analog-digital designs, and clever wake-up procedures that keep the electronics mostly inactive. Exploiting renewable energy resources in the device's environment, however, offers a power source limited by the device's physical survival rather than an adjunct energy store. Energy harvesting's true legacy dates to the water wheel and windmill, and credible approaches that scavenge energy from waste heat or vibration have been around for many decades. Nonetheless, the field has encountered renewed interest as low-power electronics, wireless standards, and miniaturization conspire to populate the world with sensor networks and mobile devices. This article presents a whirlwind survey through energy harvesting, spanning historic and current developments.

/pdf/energy-scavenging-for-mobile-and-wireless-electronics-348wnsxztj.pdf

Energy scavenging for mobile and wireless electronics

A new energy paradigm, consisting of greater reliance on renewable energy sources and increased concern for energy effi ciency in the total energy lifecycle, has accelerated research into energy-related technologies. Due to their ubiquity, magnetic materials play an important role in improving the effi ciency and performance of devices in electric power generation, conditioning, conversion, transportation, and other energy-use sectors of the economy. This review focuses on the state-of-the-art hard and soft magnets and magnetocaloric materials, with an emphasis on their optimization for energy applications. Specifi cally, the impact of hard magnets on electric motor and transportation technologies, of soft magnetic materials on electricity generation and conversion technologies, and of magnetocaloric materials for refrigeration technologies, are discussed. The synthesis, characterization, and property evaluation of the materials, with an emphasis on structure‐property relationships, are discussed in the context of their respective markets, as well as their potential impact on energy effi ciency. Finally, considering future bottlenecks in raw materials, options for the recycling of rare-earth intermetallics for hard magnets will be discussed.

/pdf/magnetic-materials-and-devices-for-the-21st-century-stronger-xvi5miqu1p.pdf

Magnetic materials and devices for the 21st century: Stronger, lighter, and more energy efficient

Energy harvesting generators are attractive as inexhaustible replacements for batteries in low-power wireless electronic devices and have received increasing research interest in recent years. Ambient motion is one of the main sources of energy for harvesting, and a wide range of motion-powered energy harvesters have been proposed or demonstrated, particularly at the microscale. This paper reviews the principles and state-of-art in motion-driven miniature energy harvesters and discusses trends, suitable applications, and possible future developments.

/pdf/energy-harvesting-from-human-and-machine-motion-for-wireless-3lsf4oudvo.pdf

Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices

Several forms of vibration-driven MEMS microgenerator are possible and are reported in the literature, with potential application areas including distributed sensing and ubiquitous computing. This paper sets out an analytical basis for their design and comparison, verified against full time-domain simulations. Most reported microgenerators are classified as either velocity-damped resonant generators (VDRGs) or Coulomb-damped resonant generators (CDRGs) and a unified analytical structure is provided for these generator types. Reported generators are shown to have operated at well below achievable power densities and design guides are given for optimising future devices. The paper also describes a new class-the Coulomb-force parametric generator (CFPG)-which does not operate in a resonant manner. For all three generators, expressions and graphs are provided showing the dependence of output power on key operating parameters. The optimization also considers physical generator constraints such as voltage limitation or maximum or minimum damping ratios. The sensitivity of each generator architecture to the source vibration frequency is analyzed and this shows that the CFPG can be better suited than the resonant generators to applications where the source frequency is likely to vary. It is demonstrated that mechanical resonance is particularly useful when the vibration source amplitude is small compared to the allowable mass-to-frame displacement. The CDRG and the VDRG generate the same power at resonance but give better performance below and above resonance respectively. Both resonant generator types are unable to operate when the allowable mass frame displacement is small compared to the vibration source amplitude, as is likely to be the case in some MEMS applications. The CFPG is, therefore, required for such applications.

https://spiral.imperial.ac.uk:8443/bitstream/10044/1/997/1/Architectures%20for%20vibration-driven.pdf

Architectures for vibration-driven micropower generators

This paper describes the analysis, simulation and testing of a microengineered motion-driven power generator, suitable for application in sensors within or worn on the human body. Micro-generators capable of powering sensors have previously been reported, but these have required high frequency mechanical vibrations to excite a resonant structure. However, body-driven movements are slow and irregular, with large displacements, and hence do not effectively couple energy into such generators. The device presented here uses an alternative, non-resonant operating mode. Analysis of this generator shows its potential for the application considered, and shows the possibility to optimise the design for particular conditions. An experimental prototype based on a variable parallel-plate capacitor operating in constant charge mode is described which confirms the analysis and simulation models. This prototype, when precharged to 30 V, develops an output voltage of 250 V, corresponding to 0.3J per cycle. The experimental test procedure and the instrumentation are also described.

/pdf/mems-electrostatic-micropower-generator-for-low-frequency-pcywa0q5az.pdf

MEMS electrostatic micropower generator for low frequency operation

Energy harvesting from human motion faces the challenges of low frequency and random excitation. One strategy that has been successful in the past is frequency up-conversion. This paper introduces an inertial device that combines this principle, in the form of piezoelectric beam plucking through magnetic coupling with a rotating proof mass. The advantages rotational systems can have for body movements are discussed. The prototype is described and tested in a real world environment during a running race and later on in a laboratory environment on a custom built linear excitation table. Throughout these tests it is confirmed that such a device can operate over a broad range of frequencies and under varying orientations, making it suitable for this intended application. Across frequencies between 0.5 and 4 Hz and accelerations between 1 and 20 m/s2 power outputs in the range of tens of microwatts were achieved, with a peak value of 43 μW at 2 Hz and 20 m/s2 when the rotor went into a continuous rotation.

A piezoelectric frequency up-converting energy harvester with rotating proof mass for human body applications

This paper reviews the convective heat transfer within the air gap of both cylindrical and disk geometry rotating electrical machines, including worked examples relevant to fractional horsepower electrical machines. Thermal analysis of electrical machines is important because torque density is limited by maximum temperature. Knowledge of surface convective heat transfer coefficients is necessary for accurate thermal modeling, for example, using lumped parameter models. There exists a wide body of relevant literature, but much of it has traditionally been in other application areas, dominated by mechanical engineers, such as gas turbine design. Particular attention is therefore given to the explanation of the relevant nondimensional parameters and to the presentation of measured convective heat transfer correlations for a wide variety of situations from laminar to turbulent flow at small and large gap sizes for both radial-flux and axial-flux electrical machines.

/pdf/air-gap-convection-in-rotating-electrical-machines-2wdzpdt0z5.pdf

Andrew S. Holmes

Papers

Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices

Architectures for vibration-driven micropower generators

MEMS electrostatic micropower generator for low frequency operation

A piezoelectric frequency up-converting energy harvester with rotating proof mass for human body applications

Air-Gap Convection in Rotating Electrical Machines