Electrochemical capacitors, also called supercapacitors, store energy using either ion adsorption (electrochemical double layer capacitors) or fast surface redox reactions (pseudo-capacitors). They can complement or replace batteries in electrical energy storage and harvesting applications, when high power delivery or uptake is needed. A notable improvement in performance has been achieved through recent advances in understanding charge storage mechanisms and the development of advanced nanostructured materials. The discovery that ion desolvation occurs in pores smaller than the solvated ions has led to higher capacitance for electrochemical double layer capacitors using carbon electrodes with subnanometre pores, and opened the door to designing high-energy density devices using a variety of electrolytes. Combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries. The use of carbon nanotubes has further advanced micro-electrochemical capacitors, enabling flexible and adaptable devices to be made. Mathematical modelling and simulation will be the key to success in designing tomorrow's high-energy and high-power devices.

https://hal.archives-ouvertes.fr/hal-02417326/document

Materials for electrochemical capacitors

In this critical review, metal oxides-based materials for electrochemical supercapacitor (ES) electrodes are reviewed in detail together with a brief review of carbon materials and conducting polymers. Their advantages, disadvantages, and performance in ES electrodes are discussed through extensive analysis of the literature, and new trends in material development are also reviewed. Two important future research directions are indicated and summarized, based on results published in the literature: the development of composite and nanostructured ES materials to overcome the major challenge posed by the low energy density of ES (476 references).

/pdf/a-review-of-electrode-materials-for-electrochemical-2cok5em0bo.pdf

A review of electrode materials for electrochemical supercapacitors

This tutorial review provides a brief summary of recent research progress on carbon-based electrode materials for supercapacitors, as well as the importance of electrolytes in the development of supercapacitor technology. The basic principles of supercapacitors, the characteristics and performances of various nanostructured carbon-based electrode materials are discussed. Aqueous and non-aqueous electrolyte solutions used in supercapacitors are compared. The trend on future development of high-power and high-energy supercapacitors is analyzed.

Carbon-based materials as supercapacitor electrodes

Supercapacitors, also called ultracapacitors or electrochemical capacitors, store electrical charge on high-surface-area conducting materials. Their widespread use is limited by their low energy storage density and relatively high effective series resistance. Using chemical activation of exfoliated graphite oxide, we synthesized a porous carbon with a Brunauer-Emmett-Teller surface area of up to 3100 square meters per gram, a high electrical conductivity, and a low oxygen and hydrogen content. This sp 2 -bonded carbon has a continuous three-dimensional network of highly curved, atom-thick walls that form primarily 0.6- to 5-nanometer-width pores. Two-electrode supercapacitor cells constructed with this carbon yielded high values of gravimetric capacitance and energy density with organic and ionic liquid electrolytes. The processes used to make this carbon are readily scalable to industrial levels.

/pdf/carbon-based-supercapacitors-produced-by-activation-of-1wqrpq3luo.pdf

Carbon-based Supercapacitors Produced by Activation of Graphene

3.2.3. Hydroformylation 2467 3.2.4. Dimerization 2468 3.2.5. Oxidative Cleavage and Ozonolysis 2469 3.2.6. Metathesis 2470 4. Terpenes 2472 4.1. Pinene 2472 4.1.1. Isomerization: R-Pinene 2472 4.1.2. Epoxidation of R-Pinene 2475 4.1.3. Isomerization of R-Pinene Oxide 2477 4.1.4. Hydration of R-Pinene: R-Terpineol 2478 4.1.5. Dehydroisomerization 2479 4.2. Limonene 2480 4.2.1. Isomerization 2480 4.2.2. Epoxidation: Limonene Oxide 2480 4.2.3. Isomerization of Limonene Oxide 2481 4.2.4. Dehydroisomerization of Limonene and Terpenes To Produce Cymene 2481

Chemical Routes for the Transformation of Biomass into Chemicals

Understanding chemical reactions between carbons and NaOH and KOH: An insight into the chemical activation mechanism

KOH and NaOH activation mechanisms of multiwalled carbon nanotubes with different structural organisation

Preparation of activated carbons from spanish anthracite. II. Activation by NaOH

Behaviour of activated carbons with different pore size distributions and surface oxygen groups for benzene and toluene adsorption at low concentrations

Etudes de l'adsorption de N 2 (77 K) et de CO 2 (273 et 298 K) sur une serie de charbons actifs, ayant subi differents degres de calcination. Considerations sur la structure microporeuse

Angel Linares-Solano

Papers

Understanding chemical reactions between carbons and NaOH and KOH: An insight into the chemical activation mechanism

KOH and NaOH activation mechanisms of multiwalled carbon nanotubes with different structural organisation

Preparation of activated carbons from spanish anthracite. II. Activation by NaOH

Behaviour of activated carbons with different pore size distributions and surface oxygen groups for benzene and toluene adsorption at low concentrations

Use of nitrogen vs. carbon dioxide in the characterization of activated carbons