This paper provides a comprehensive review of the maximum power point tracking (MPPT) techniques applied to photovoltaic (PV) power system available until January, 2012. A good number of publications report on different MPPT techniques for a PV system together with implementation. But, confusion lies while selecting a MPPT as every technique has its own merits and demerits. Hence, a proper review of these techniques is essential. Unfortunately, very few attempts have been made in this regard, excepting two latest reviews on MPPT [Salas, 2006], [Esram and Chapman, 2007]. Since, MPPT is an essential part of a PV system, extensive research has been revealed in recent years in this field and many new techniques have been reported to the list since then. In this paper, a detailed description and then classification of the MPPT techniques have made based on features, such as number of control variables involved, types of control strategies employed, types of circuitry used suitably for PV system and practical/commercial applications. This paper is intended to serve as a convenient reference for future MPPT users in PV systems.

A Comparative Study on Maximum Power Point Tracking Techniques for Photovoltaic Power Systems

Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems

Current-voltage and power-voltage characteristics of large photovoltaic (PV) arrays under partially shaded conditions are characterized by multiple steps and peaks. This makes the tracking of the actual maximum power point (MPP) [global peak (GP)] a difficult task. In addition, most of the existing schemes are unable to extract maximum power from the PV array under these conditions. This paper proposes a novel algorithm to track the global power peak under partially shaded conditions. The formulation of the algorithm is based on several critical observations made out of an extensive study of the PV characteristics and the behavior of the global and local peaks under partially shaded conditions. The proposed algorithm works in conjunction with a DC-DC converter to track the GP. In order to accelerate the tracking speed, a feedforward control scheme for operating the DC-DC converter is also proposed, which uses the reference voltage information from the tracking algorithm to shift the operation toward the MPP. The tracking time with this controller is about one-tenth as compared to a conventional controller. All the observations and conclusions, including simulation and experimental results, are presented.

Maximum Power Point Tracking Scheme for PV Systems Operating Under Partially Shaded Conditions

This paper presents simulation and hardware implementation of incremental conductance (IncCond) maximum power point tracking (MPPT) used in solar array power systems with direct control method. The main difference of the proposed system to existing MPPT systems includes elimination of the proportional-integral control loop and investigation of the effect of simplifying the control circuit. Contributions are made in several aspects of the whole system, including converter design, system simulation, controller programming, and experimental setup. The resultant system is capable of tracking MPPs accurately and rapidly without steady-state oscillation, and also, its dynamic performance is satisfactory. The IncCond algorithm is used to track MPPs because it performs precise control under rapidly changing atmospheric conditions. MATLAB and Simulink were employed for simulation studies, and Code Composer Studio v3.1 was used to program a TMS320F2812 digital signal processor. The proposed system was developed and tested successfully on a photovoltaic solar panel in the laboratory. Experimental results indicate the feasibility and improved functionality of the system.

Simulation and Hardware Implementation of Incremental Conductance MPPT With Direct Control Method Using Cuk Converter

Gallium-nitride power transistor (GaN HEMT) and integrated circuit technologies have matured dramatically over the last few years, and many hundreds of thousands of devices have been manufactured and fielded in applications ranging from pulsed radars and counter-IED jammers to CATV modules and fourth-generation infrastructure base-stations. GaN HEMT devices, exhibiting high power densities coupled with high breakdown voltages, have opened up the possibilities for highly efficient power amplifiers (PAs) exploiting the principles of waveform engineered designs. This paper summarizes the unique advantages of GaN HEMTs compared to other power transistor technologies, with examples of where such features have been exploited. Since RF power densities of GaN HEMTs are many times higher than other technologies, much attention has also been given to thermal management-examples of both commercial “off-the-shelf” packaging as well as custom heat-sinks are described. The very desirable feature of having accurate large-signal models for both discrete transistors and monolithic microwave integrated circuit foundry are emphasized with a number of circuit design examples. GaN HEMT technology has been a major enabler for both very broadband high-PAs and very high-efficiency designs. This paper describes examples of broadband amplifiers, as well as several of the main areas of high-efficiency amplifier design-notably Class-D, Class-E, Class-F, and Class-J approaches, Doherty PAs, envelope-tracking techniques, and Chireix outphasing.

/pdf/a-review-of-gan-on-sic-high-electron-mobility-power-4mjzeqemry.pdf

A Review of GaN on SiC High Electron-Mobility Power Transistors and MMICs

Ultra-wide Band (UWB) technology is a new, useful and safe technology in the fleld of wireless body networks. This paper focuses on the feasibility of estimating vital signs | speciflcally breathing rate and heartbeat frequency | from the spectrum of recorded waveforms, using an impulse-radio (IR) UWB radar. To this end, an analytical model is developed to perform and interpret the spectral analysis. Both the harmonics and the intermodulation between respiration and heart signals are addressed. Simulations have been performed to demonstrate how they afiect the detection of vital signs and also to analyze the in∞uence of the pulse waveform. A fllter to cancel out breathing harmonics is also proposed to improve heart rate detection. The results of the experiments are presented under difierent scenarios which demonstrate the accuracy of the proposed technique for determining respiration and heartbeat rates. It has been shown that an IR-UWB radar can meet the requirements of typical biomedical applications such as non-invasive heart and respiration rate monitoring.

/pdf/analysis-of-vital-signs-monitoring-using-an-ir-uwb-radar-3dvli0yol5.pdf

Analysis of vital signs monitoring using an ir-uwb radar

Radio frequency identification (RFID) applications are growing rapidly, especially in the UHF frequency band, which is being used in inventory management. Passive UHF tags are preferred for this application. However, the read range is often overestimated using free space calculations. This paper presents a method to estimate the read range in multipath environments. Other effects with a direct impact on read range as the effect of materials on tag performance are also addressed. Using the proposed model and the ray trace method a RFID system simulator is presented.

Radio Link Budgets for UHF RFID on Multipath Environments

In this paper, an RF identification sensor system is developed. It comprises passive sensors and an ultra-wideband (UWB) reader. The sensors are based on time-coded chipless tags. They consist of an UWB antenna connected to a delay line that is, in turn, loaded with a resistive temperature sensor. This sensor modulates the amplitude of the backscattered signals as a function of the temperature. The sensor tags are identified by changing the length of the delay line. In this paper, the operation principle and design of time-coded tags is presented and the integration of sensors in these tags is addressed. In addition, two measurement techniques are compared to implement the UWB reader. The first one is based on frequency sweeping and uses a vector network analyzer. The second one is based on a low-cost UWB radar. A full characterization of the sensor system is provided.

Passive Wireless Temperature Sensor Based on Time-Coded UWB Chipless RFID Tags

Most of single-stage power factor correction (PFC) ac-dc converters usually present a high voltage swing on the storage capacitor. That means, high size and cost of the storage capacitor is obtained. The Series Inductance Interval (SII) PFC converters allow reducing cost and size of the storage capacitor since the capacitor voltage is lower than the output voltage and, therefore, the voltage swing is significantly reduced. In this paper, the novel single-stage SII-B-2D PFC converter is presented. In addition, this topology provides input current harmonics under EN61000-3-2 Class D limits and advantageous component count

Antonio Manuel Lazaro

Papers

Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems

Analysis of vital signs monitoring using an ir-uwb radar

Radio Link Budgets for UHF RFID on Multipath Environments

Passive Wireless Temperature Sensor Based on Time-Coded UWB Chipless RFID Tags

New Power Factor Correction AC-DC Converter With Reduced Storage Capacitor Voltage