This paper presents a review of advanced control techniques for microgrids. This paper covers decentralized, distributed, and hierarchical control of grid-connected and islanded microgrids. At first, decentralized control techniques for microgrids are reviewed. Then, the recent developments in the stability analysis of decentralized controlled microgrids are discussed. Finally, hierarchical control for microgrids that mimic the behavior of the mains grid is reviewed.

/pdf/advanced-control-architectures-for-intelligent-microgrids-5goubszp15.pdf

Advanced Control Architectures for Intelligent Microgrids—Part I: Decentralized and Hierarchical Control

Energy is a vital input for social and economic development. As a result of the generalization of agricultural, industrial and domestic activities the demand for energy has increased remarkably, especially in emergent countries. This has meant rapid grower in the level of greenhouse gas emissions and the increase in fuel prices, which are the main driving forces behind efforts to utilize renewable energy sources more effectively, i.e. energy which comes from natural resources and is also naturally replenished. Despite the obvious advantages of renewable energy, it presents important drawbacks, such as the discontinuity of generation, as most renewable energy resources depend on the climate, which is why their use requires complex design, planning and control optimization methods. Fortunately, the continuous advances in computer hardware and software are allowing researchers to deal with these optimization problems using computational resources, as can be seen in the large number of optimization methods that have been applied to the renewable and sustainable energy field. This paper presents a review of the current state of the art in computational optimization methods applied to renewable and sustainable energy, offering a clear vision of the latest research advances in this field.

Optimization methods applied to renewable and sustainable energy: A review

Large-scale deployment of intermittent renewable energy (namely wind energy and solar PV) may entail new challenges in power systems and more volatility in power prices in liberalized electricity markets. Energy storage can diminish this imbalance, relieving the grid congestion, and promoting distributed generation. The economic implications of grid-scale electrical energy storage technologies are however obscure for the experts, power grid operators, regulators, and power producers. A meticulous techno-economic or cost-benefit analysis of electricity storage systems requires consistent, updated cost data and a holistic cost analysis framework. To this end, this study critically examines the existing literature in the analysis of life cycle costs of utility-scale electricity storage systems, providing an updated database for the cost elements (capital costs, operational and maintenance costs, and replacement costs). Moreover, life cycle costs and levelized cost of electricity delivered by electrical energy storage is analyzed, employing Monte Carlo method to consider uncertainties. The examined energy storage technologies include pumped hydropower storage, compressed air energy storage (CAES), flywheel, electrochemical batteries (e.g. lead–acid, NaS, Li-ion, and Ni–Cd), flow batteries (e.g. vanadium-redox), superconducting magnetic energy storage, supercapacitors, and hydrogen energy storage (power to gas technologies). The results illustrate the economy of different storage systems for three main applications: bulk energy storage, T&D support services, and frequency regulation.

Electrical energy storage systems: A comparative life cycle cost analysis

The authors discuss high-voltage power conversion. Conventional series connection and three-level voltage source inverter techniques are reviewed and compared. A novel versatile multilevel commutation cell is introduced: it is shown that this topology is safer and more simple to control, and delivers purer output waveforms. The authors show how this technique can be applied to either choppers or voltage-source inverters and generalized to any number of switches.<<ETX>>

Multi-level conversion : high voltage choppers and voltage-source inverters

The paper reviews different approaches, technologies, and strategies to manage large-scale schemes of variable renewable electricity such as solar and wind power. We consider both supply and demand side measures. In addition to presenting energy system flexibility measures, their importance to renewable electricity is discussed. The flexibility measures available range from traditional ones such as grid extension or pumped hydro storage to more advanced strategies such as demand side management and demand side linked approaches, e.g. the use of electric vehicles for storing excess electricity, but also providing grid support services. Advanced batteries may offer new solutions in the future, though the high costs associated with batteries may restrict their use to smaller scale applications. Different “P2Y”-type of strategies, where P stands for surplus renewable power and Y for the energy form or energy service to which this excess in converted to, e.g. thermal energy, hydrogen, gas or mobility are receiving much attention as potential flexibility solutions, making use of the energy system as a whole. To “functionalize” or to assess the value of the various energy system flexibility measures, these need often be put into an electricity/energy market or utility service context. Summarizing, the outlook for managing large amounts of RE power in terms of options available seems to be promising.

https://research.aalto.fi/files/6557604/lund_et_al_review.pdf

Review of energy system flexibility measures to enable high levels of variable renewable electricity

In recent years, distributed generation, as clean natural energy generation and cogeneration system of high thermal efficiency, has increased due to the problems of global warming and exhaustion of fossil fuels. Many of the distributed generations are set up in the vicinity of the customer, with the advantage that this decreases transmission losses. However, output power generated from natural energy, such as wind power, photovoltaics, etc., which is distributed generation, is influenced by meteorological conditions. Therefore, when the distributed generation increases by conventional control techniques, it is expected that the voltage change of each node becomes a problem. Proposed in this paper is the optimal control of distribution voltage with coordination of distributed installations, such as the load ratio control transformer, step voltage regulator (SVR), shunt capacitor, shunt reactor, and static var compensator. In this research, SVR is assumed to be a model with tap changing where the signal is received from a central control unit. Moreover, the communication infrastructure in the supply of a distribution system is assumed to be widespread. The genetic algorithm is used to determine the operation of this control. In order to confirm the validity of the proposed method, simulations are carried out for a distribution network model with distributed generation (photovoltaic generation).

Optimal Distribution Voltage Control and Coordination With Distributed Generation

This paper presents an output power smoothing method by a simple coordinated control of DC-link voltage and pitch angle of a wind energy conversion system (WECS) with a permanent magnet synchronous generator (PMSG). The WECS adopts an AC-DC-AC converter system with voltage-source converters (VSC). The DC-link voltage command is determined according to output power fluctuations of the PMSG. The output power fluctuationsin low- and high-frequency domains are smoothed by the pitch angle control of the WECS, and the DC-link voltage control, respectively. By using the proposed method, the wind turbine blade stress is mitigated as the pitch action in high-frequency domain is reduced. In addition, the DC-link capacitor size is reduced without the charge/discharge action in low-frequency domain. A chopper circuit is used in the DC-link circuit for stable operation of the WECS under-line fault. Effectiveness of the proposed method is verified by the numerical simulations.

A Coordinated Control Method to Smooth Wind Power Fluctuations of a PMSG-Based WECS

A photovoltaic (PV) system's output power fluctuates according to the weather conditions. Fluctuating PV power causes frequency deviations in the power utilities when the penetration is large. Usually, an energy storage system (ESS) is used to smooth the PV output power fluctuations and then the smoothed power is supplied to the utility. In this paper, a simple fuzzy-based frequency-control method is proposed for the PV generator in a PV-diesel hybrid system without the smoothing of PV output power fluctuations. By means of the proposed method, output power control of a PV generator considering the conditions of power utilities and the maximizing of energy capture are achieved. Here, fuzzy control is used to generate the PV output power command. This fuzzy control has average insolation, change of insolation, and frequency deviation as inputs. The proposed method is compared with a maximum power point tracking control-based method and with an ESS-based conventional control method. The numerical simulation results show that the proposed method is effective in providing frequency control and also delivers power near the maximum PV power level.

A Frequency-Control Approach by Photovoltaic Generator in a PV–Diesel Hybrid Power System

Optimal configuration of power generating systems in isolated island with renewable energy

Recently, smart grids are attracting attention. Already, a smart grid based on an AC grid is proposed. However, no study on research is presented or published on a smart grid based on a dc grid. This paper presents an ac/dc hybrid smart power system. The proposed system has advantages of both dc and ac grids. The proposed power system consists of a wind generator and several controllable loads. The controllable loads have different capacities. Therefore, by applying power consumption control with the droop characteristic, the dc bus voltage is maintained within the acceptable range. As controllable loads, electric water heater and electric vehicle are assumed. Effectiveness of the proposed method is verified by numerical simulation results.

Atsushi Yona

Papers

Optimal Distribution Voltage Control and Coordination With Distributed Generation

A Coordinated Control Method to Smooth Wind Power Fluctuations of a PMSG-Based WECS

A Frequency-Control Approach by Photovoltaic Generator in a PV–Diesel Hybrid Power System

Optimal configuration of power generating systems in isolated island with renewable energy

A Hybrid Smart AC/DC Power System