: The unpolarized absorption and circular dichroism spectra of the fundamental vibrational transitions of the chiral molecule, 4-methyl-2-oxetanone, are calculated ab initio. Harmonic force fields are obtained using Density Functional Theory (DFT), MP2, and SCF methodologies and a 5S4P2D/3S2P (TZ2P) basis set. DFT calculations use the Local Spin Density Approximation (LSDA), BLYP, and Becke3LYP (B3LYP) density functionals. Mid-IR spectra predicted using LSDA, BLYP, and B3LYP force fields are of significantly different quality, the B3LYP force field yielding spectra in clearly superior, and overall excellent, agreement with experiment. The MP2 force field yields spectra in slightly worse agreement with experiment than the B3LYP force field. The SCF force field yields spectra in poor agreement with experiment.The basis set dependence of B3LYP force fields is also explored: the 6-31G* and TZ2P basis sets give very similar results while the 3-21G basis set yields spectra in substantially worse agreements with experiment. jg

Ab initio calculation of vibrational absorption and circular dichroism spectra using density functional force fields

Perovskite-type oxides are a class of compounds with the general formula ABO 3 . They are a very important family of materials and exhibit properties suitable for numerous applications. In this review, the preparation, characterization, and application of selected perovskite oxides such as SrTiO 3 , KTaO 3 , NaTaO 3 , KNbO 3 , and NaNbO 3 in photocatalysis are described. In addition, various strategies for enhancing their photocatalytic activities are discussed, including doping with metals and nonmetals (Cr, Ni, Mn, Pb, Bi, N, Br, S, C, and F), modification with noble metal (Au, Ag, Pt, Pd, Ph, Ru) nanoparticles, and doping with rare earth elements (La). Moreover, the review summarizes the influence of different morphologies and surface properties on the photoactivity of the materials.

Selected perovskite oxides: Characterization, preparation and photocatalytic properties—A review

Perovskite-based photocatalysts are of significant interest in the field of photocatalysis. To date, several perovskite material systems have been developed and their applications in visible light photocatalysis studied. This article provides a review of the visible light (λ > 400 nm) active perovskite-based photocatalyst systems. The materials systems are classified by the B site cations and their crystal structure, optical properties, electronic structure, and photocatalytic performance are reviewed in detail. Titanates, tantalates, niobates, vanadates, and ferrites form important photocatalysts which show promise in visible light-driven photoreactions. Along with simple perovskite (ABO3) structures, development of double/complex perovskites that are active under visible light is also reviewed. Various strategies employed for enhancing the photocatalytic performance have been discussed, emphasizing the specific advantages and challenges offered by perovskite-based photocatalysts. This review provides a broad overview of the perovskite photocatalysts, summarizing the current state of the work and offering useful insights for their future development.

/pdf/a-review-on-visible-light-active-perovskite-based-1owjo3skuy.pdf

A review on visible light active perovskite-based photocatalysts.

We assess the performance of recent density functionals for the exchange-correlation energy of a nonmolecular solid, by applying accurate calculations with the GAUSSIAN, BAND, and VASP codes to a test set of 24 solid metals and nonmetals. The functionals tested are the modified Perdew-Burke-Ernzerhof generalized gradient approximation PBEsol GGA, the second-order GGA SOGGA, and the Armiento-Mattsson 2005 AM05 GGA. For completeness, we also test more standard functionals: the local density approximation, the original PBE GGA, and the Tao-Perdew-Staroverov-Scuseria meta-GGA. We find that the recent density functionals for solids reach a high accuracy for bulk properties lattice constant and bulk modulus. For the cohesive energy, PBE is better than PBEsol overall, as expected, but PBEsol is actually better for the alkali metals and alkali halides. For fair comparison of calculated and experimental results, we consider the zeropoint phonon and finite-temperature effects ignored by many workers. We show how GAUSSIAN basis sets and inaccurate experimental reference data may affect the rating of the quality of the functionals. The results show that PBEsol and AM05 perform somewhat differently from each other for alkali metal, alkaline-earth metal, and alkali halide crystals where the maximum value of the reduced density gradient is about 2, but perform very similarly for most of the other solids where it is often about 1. Our explanation for this is consistent with the importance of exchange-correlation nonlocality in regions of core-valence overlap.

https://dspace.mit.edu/openaccess-disseminate/1721.1/51869

Assessing the performance of recent density functionals for bulk solids

The development and utilization of solar energy in environmental remediation and water splitting is being intensively studied worldwide. During the past few decades, tremendous efforts have been devoted to developing non-toxic, low-cost, efficient and stable photocatalysts for water splitting and environmental remediation. To date, several hundreds of photocatalysts mainly based on metal oxides, sulfides and (oxy)nitrides with different structures and compositions have been reported. Among them, perovskite oxides and their derivatives (layered perovskite oxides) comprise a large family of semiconductor photocatalysts because of their structural simplicity and flexibility. This review specifically focuses on the general background of perovskite and its related materials, summarizes the recent development of perovskite photocatalysts and their applications in water splitting and environmental remediation, discusses the theoretical modelling and calculation of perovskite photocatalysts and presents the key challenges and perspectives on the research of perovskite photocatalysts.

/pdf/inorganic-perovskite-photocatalysts-for-solar-energy-23zkithnx0.pdf

Inorganic perovskite photocatalysts for solar energy utilization

We have investigated the electronic structure of anionic mono- (S, N, and C) and co-doping (N-N, C-N, S-C, and S-N) on BiNbO4 for the visible-light photocatalysis. The maximum band gap reduction of pure BiNbO4 is possible with the (C-S) co-doping and minimum with N mono-doping. The calculated binding energies show that the co-doped systems are more stable than their mono-doped counterparts. Our optical absorption curves indicate that the mono- (C) and co-anionic doped (N-N and C-S) BiNbO4 systems are promising materials for visible light photocatalysis.

Band gap engineering in BiNbO4 for visible-light photocatalysis

In this paper, we have employed DFT and HSE06 methods to study the doping effects on the NaTaO3 photocatalyst. N, S, C, and P monodoping and N–N, C–S, P–P, and N–P codoping have been studied. The redopants’ formation energies have been calculated, and we find S monodoping is energetically more favorable than any other elemental doping. The mechanism of anion doping on the electronic properties of NaTaO3 is discussed. We find the band gap reduces significantly if we dope with anionic elements whose p orbital energy is higher than the O 2p orbitals. N and S can shift the valence band edge upward without losing the ability to split water into H2 and O2. Double-hole-mediated codoping can decrease the band gap significantly. On the basis of our calculations, codoping with N–N, C–S, and P–P could absorb visible light. However, they can only decompose water into H2 when the valence band edge is above the water oxidation level.

Anion-Doped NaTaO3 for Visible Light Photocatalysis

Density functional theory (DFT) calculations have been employed to explore the gas-sensing mechanisms of NiO (100) surface on the basis of energetic and electronic properties. We have calculated th ...

Molecular simulation for gas adsorption at NiO (100) surface.

The electronic structure of pure BiNbO4 has been calculated and their electronic band positions have been aligned with respect to the water oxidation/reduction potential. The effect of cationic (Mo), anionic (N), and co-doping (Mo-N) on BiNbO4 has been studied and discussed with respect to the standard redox potential levels. Our results show that co-doping of Mo and N in BiNbO4 reduces the band gap up to 31.8%, thus making it a potential candidate for the photocatalysis of water for hydrogen production. The relative stability between the mono- and co-doped BiNbO4 materials show that co-doped material is more stable and feasible in comparison to the mono-doped materials.

Mo- and N-doped BiNbO(4) for photocatalysis applications

Experimental and theoretical studies of water-molecule adsorption on BaTiO3 single-crystal surfaces are presented in this paper. The Fourier transform infrared spectrum shows that there are three types of energy-nonequivalent active modes for water-molecule adsorption on the in-plane-polarized BaTiO3(100) surface. The X-ray photoelectron spectroscopic results illustrate hydroxyl group on the surface, thereby indicating that the adsorbed water molecules are dissociated. The first-principles calculations of the 1/4-, 1/2-, and 1-monolayer water coverage demonstrate that H bonds are formed between the hydrogen of water and the surface oxygen of BaTiO3 and between the hydrogen of hydroxyl and the surface oxygen of BaTiO3, and the difference in the water adsorption behavior on the BaO- and TiO2-terminated surfaces. The calculation results are in good agreement with the experimental observations.

Baochang Wang

Papers

Band gap engineering in BiNbO4 for visible-light photocatalysis

Anion-Doped NaTaO3 for Visible Light Photocatalysis

Molecular simulation for gas adsorption at NiO (100) surface.

Mo- and N-doped BiNbO(4) for photocatalysis applications

Water Adsorption and Dissociation on BaTiO3 Single-Crystal Surfaces